Fire Alarms
Showing 1351–1400 of 1944 results
-
Apollo XP95 Ancillary Base Sounder
- For use on an XP95/Discovery systems.
- Sound output of 85dB(A) at 1 metre.
- Current consumption of only 3mA.
- Loop-powered.
- Responds to signals from the associated detector – does not have an address of its own.
-
Apollo XP95 and Discovery Transparent Manual Call Point Hinged Cover
- Prevents Accidental Enable
- Fits XP95 and Discovery Call Points
-
Apollo XP95 Blanking Cap For Base Sounders
- Blanking cap for XP95 sounder or combined sounder & flasher bases.
- Suitable for applications where no detector is required.
- Available in either red or white.
-
Apollo XP95 Dual Channel DIN-Rail Isolator
- Two independent isolators in one DIN-rail housing
- Loop-powered with visual LED fault indication
- Supports up to 20 XP95 detectors between isolators
-
Apollo XP95 DIN-Rail Mains Switching Input / Output Unit
- It can report fault, switch open and switch closed levels
- Three visible LEDs
- Capable of switching up to 8A at 250V AC
- Fits a standard 35mm DIN-Rail
-
Apollo XP95 DIN-Rail Sounder Controller (5 Amperes)
- Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
- May be synchronised with loop sounders
- An opto-coupled input is provided to monitor the state of the external power supply
- Features group addressing
- Will accept a load of up to 5A
-
Apollo XP95 I.S. Mounting Base
- Universal XPERT card addressing
- One-way fit design
- Only accepts intrinsically safe detectors
-
Apollo XP95 Input/Output Unit With Isolator
The Apollo XP95Â Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
-
Apollo XP95 Intelligent Deep Base
Compatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.
-
Apollo XP95 Intelligent Heater Base
The Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.
-
Apollo XP95 Intelligent Isolator
- Patented short-circuit detection technology
- Automatic restoration when fault cleared
- Compatible with XP95, Discovery and CoreProtocol systems
-
Apollo XP95 Intelligent Isolator Base
This base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.
-
Apollo XP95 Intelligent Mounting Base in White or Black
- XPERT Addressing.
- One way fit of detector.
- Locking feature to prevent unauthorised detector removal.
-
Apollo XP95 Intelligent Twin Switch Monitor
- Twin switch montor for Apollo intelligent systems.
- Improved design for ease of wiring meaning faster installation.
- Contains controllable isolator.
- Address range 1 - 254.
- Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems.
-
Apollo XP95 Isolating Base
The XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.
-
Apollo XP95 Loop Powered VAD, White Body, White Flash, Ceiling Category
- Uses high intensity LED.
- EN 54-23 Compliant Category C VAD.
- Flash rate 0.5Hz.
- Fault signal if LED check failed.
-
Apollo XP95 Loop-Powered Visual Indicator Base with Isolator
- Visual indicator flash rate of once per second
- Synchronisation of visual indicator flash
- Individual and group addressing
- Unique visual indicator self-test
- Loop-powered
- Built-in Isolator
-
Apollo XP95 Mini Switch Monitor
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo XP95 Multi-tone Open Area Indoor Sounder
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of ‘alert’ and ‘evacuate’ tones.
- Individual & group addressing.
- Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.
-
Apollo XP95 Open-Area Sounder & Beacon, Red Body, Red Lens
- Choice of tones on standard device: Apollo, Slow Whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
-
Apollo XP95 Pre-Addressed XPERT Cards Full Set (1-126)
- Simplifies and speeds up installation and commissioning.
- Uses patented proven technology.
- Address remains the same, no matter how often detectors are replaced.
- Flexibility to create any address.
-
Apollo XP95 Sounder Circuit Controller
- The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.
- Allows sounders to be operated continuously or be pulsed; 1 second on, 1 second off
- May be synchronised with loop sounders
-
Apollo XP95 Spare XPERT Address Card
A universal address card supplied with all bases. Using a coding guide, pips are removed to set the address of the inserted detector.
-
Apollo XP95 Switch Monitor
- Designed to monitor one or more Single Pole Volt Free Contacts and report the status
- 4 Input States
- Two Visable LED's
- Loop Powered
-
Apollo XP95 VAD Base with Isolator
Key Features
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
-
Apollo XP95 Zone Monitor Unit with Isolator
- Fitted with a bi-directional short circuit isolator
- unaffected by loop short circuits
-
Arrow Series 600 Electro Magnetic Door Closer
- Hold open or swing free operation modes
- 120 minute fire rating certification
- CE approved power sizes 3-6
-
Askari Flange Sounder in Red or White
- Easily fitted within or on control cabinets.
- Easily fitted to most surfaces.
- Can be used in exposed locations.
-
VESDA-E VEP/VEU/VES Filter Cartridge
- Smart on-board filter with dust count tracking and remaining life monitoring
- Effective filtration and optical protection with clean air barriers
- Field replaceable design for minimal maintenance downtime
-
VESDA Filter Cartridge
- Easy swap replacement filter for minimal maintenance downtime
- Two stage filtration system with 99% particle removal efficiency
- Compatible with VLC, VLF, VLP and VLS VESDA detectors
-
Aspirator For VESDA VLF (LaserFOCUS) Aspirating Smoke Detector
- Replacement aspirator for the VESDA VLF (LaserFOCUS) ADS
-
Aspirator For VESDA-E Aspiration Detectors
- Replacement aspirator for VESDA-E aspiration detectors.
- Compatible with the VEP, VES, VEU and VEA ASDs.
-
Back Box for Fireray One
- Surface mount back box for the Fireray One beam detector.
- Includes mounting holes for the 1100-000 protective wire cage.
-
Banshee Excel BS Conventional Base Sounder
- Slimmest profile in the industry
- Low current consumption
- Available in white or ivory to match to detectors
-
-
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
-
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
-
Base for Intrinsically Safe Flame Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Base for Intrinsically Safe Smoke Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Basic Fire Safety Online Video Training (Single User License)
- Video based online training
- Institute of Fire Engineers approved
- Complies with fire safety law Regulatory Reform (Fire Safety) 2005
- Reduces training costs
- Multiple choice questions
- Automatic Certification
-
Battery Conversion Kit for Fike TwinflexPro2 Panel
- Upgrades TwinflexPro2 panels to support a pair 7ah batteries.
- Clips onto existing panel.
-
-
Breakable Seals For STI Call Point Stoppers (Pack Of 10)
- Used with the Stopper to protect call points, push buttons and key switches.
- Adds an extra level of security, that doesn't hinder legitimate operation.
- Extremely simple and cost effective.
-
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec BF366 24V 5A Isolatable Relay On A Plate
- Isolating keyswitch to temporarily disable outputs when testing fire alarm system.
- LED flashes and buzzer soudners when active.
- Fits onto a standard single gang back box.
-
C-Tec BF367 Auxiliary Device Isolator
- Isolate a 24V output for fire alarm panel.
- Prevent auxillary equipment such as autodiallers from activating.
- Label includes area to write on description.
-
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
-
C-TEC BS 5839-6 Hush Button
- Fully Compliant with BS 5839 Part 6
- Works with Apollo XP95/Discovery and Hochiki ESP Protocols
- Fitted by a standard 25mm Back Box
- Built in Loop Isolator
-
CAST Detector Base
- The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
- It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
- The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator
-
