Fire Alarms
Showing 1201–1250 of 1641 results
-
Hochiki DIN Mounting Box Small or Large
- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
-
-
-
Varta CR123A Lithium Battery
- CR17345 lithium battery cell
- Ideal choice for wireless intruder & fire devices
-
Varta CR2032 3V Lithium Battery, Pack of 5
- 3V nominal voltage with 230 mAh capacity
- Wide operating temperature range -20°C to 70°C
- Compact coin cell design 20mm diameter
-
Ekho Back Box for EK-WL8-TRH/EXP/OUT
- Optional deeper back box for rectangular Ekho modules
- Includes two cable glands for convenient setup<
- Unit colored in ivory with a lens color that emits no light and does not allow tone specification
-
Ekho Back Box for EK-WL8-IN
- Meets EU standards
- Multiple knockout connections
- Includes sticky pads
-
Ekho Wireless Survey Kit
- Comprehensive kit for surveying hybrid wireless installations
- Includes portable translator, wireless smoke sensor, and signal-display keypad
- Robust carry case for easy portability and storage
-
Hochiki ESP Addressable Smoke Vent Manual Call Point in Orange with SCI
- Terminals can accommodate up to a 2.5 mm solid conductor
- Orange casing
- Features an integral SCI
- Approved by LPCB to EN54-11:2001
-
Hochiki ESP Analogue Dual Input Module With DIN Option
- Single Loop Address
- Loop Powered
- DIN Rail Version Available
- Integeral SCI
-
Hochiki ESP Analogue Dual Relay Controller with DIN Rail Option
- Loop Powered
- Single Loop Address
- Auxillary Monitored Input
- DIN Rail Version Available
-
Hochiki ESP Mains Relay Controller With SCI With DIN Rail Option
- Loop Powered
- Single Loop Address
- DIN Rail Option
- Aux Monitored Input
-
Hochiki CHQ-PCM(SCI) | Analogue Plant Control Module | 4 Relay Outputs, 4 Monitored Inputs, SCI
- 4 change-over relay outputs with volt free contacts
- 4 independent monitored inputs for contact monitoring
- Loop powered with integral short-circuit isolator
-
Hochiki ESP Analogue Single Input Monitor
- Single un-monitored input.
- Non-polarised loop connections.
- Sleep mode for low power consumption.
- Monitor LED (when fitted) - flashes when unit is polled, continuously illuminated in alarm.
-
Hochiki ESP Dual Sounder Controller with SCI with DIN Rail Option
- Single Loop Address
- Two Independant Sounder Circuits
- DIN Rail Version Available
- Auxillary Monitored Input
-
Hochiki ESP Dual Zone Monitor with SCI With DIN Rail Option
- Single Loop Address
- Requires an Aux 24V Supply
- DIN Rail Version Available
- Intrinsically Safe Version Available
-
Hochiki ESP Intrinsically Safe Sounder Interface Module With DIN Rail Option
- Provides Dual Sounder Circuits
- Fault Monitored Input
- Requires 24VDC External Power Supply
- Available in DIN Module
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki ESP Single Zone Monitor with SCI with DIN Option
- Loop Powered
- Single Loop Address
- Remote LED Output
- DIN Rail Version Available
-
Hochiki ESP Single Input Module
- Single Monitored Input
- Small Design
- Flying Leads for Easy Installation
- Approved by LPCB & VdS
-
Hochiki ESP Single Output Module
- Includes a Single Monitored Output
- Flying Leads for Easy Installation
- Approved by LPCB
-
Hochiki ESP Powered Output Module
- 24V Supply at Various Currents
- User Selectable Output
- Two Monitored Inputs
- Colour Coded Flying leads for easy installation
-
Apollo Intelligent Single or Twin Input/Output Unit with Isolator
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
-
Apollo Intelligent Mains Switching Input/Output Unit
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator*
- Address range 1 - 254
-
Hochiki ESP Device Address Programmer
- Recently been restyled to provide a more rugged yet light enclosure.
- Handheld programming tool for Hochiki ESP devices.
- Lightweight design.
- Battery operated with a capacity of 8,000 operations.
-
Hochiki ESP Sub Box Assembly
- Dobust Design
- Compatible with all CHQ Modules
- Used to Replace Damaged Components
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki Installation Kit for YBN-UA / YBO-UA(WHT) (YYA-A)
- For use with YBN-UA Recess Mounting Adaptor.
-
Hochiki Manual Call Point Key (Pack of 10)
- Comes in Pack of 10 Pcs
- Key for Hochiki Call Points
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki Recess Base Adaptor (required YYA-A)
- Allows base and analogue sensor or conventional detector to be flush mounted.
- Supplied with fixing brackets.
- Colour-matched to existing ivory and white sensor/detector ranges.
- Sturdy construction, easy to install.
- Suitable for a maximum ceiling thickness of 30mm.
-
Hochiki Sav-Wire Manual Call Point
- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector
- Removable, High Performance chamber
- Wide voltage range (9.5 ~ 30 V dc)
- One master base
- Approved to MED by GL
- Approved by LPCB
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
HOCP Howler Call Point Site Alarm
Howler Call Point Site Alarm with Key Resettable Call Point Switch Option.
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
Howler Call Post
The Howler Call post is a tough, powder-coated backboard that comes with statutory signage, mounting holes and fixings suitable for each type of Howler Alarm.
-
Howler SA01 Site Alert With Strobe
- Standalone site alarm
- LED visual strobe & 100dB @ 1m sounder
- Ability to link 20 units together with a 2 core cable
- Powered from 9V battery (included)
- IP55 rated
- Howler branded (the leading name in site alarm)
- 2 year warranty
-
Hush ActiV Grade C Stand-Alone Domestic Fire Alarm Kit
- Grade C fire detection
- Monitored for faults
- 72-hour standby battery
-
Hyfire Economy Single Loop 16 Zone Control Panel
- Economy Hyfire control panel.
- 16 zonal LEDs.
- Available with option keyswitch.
-
Toccare Mini Lite Half Loop Touch Screen Control Panel
- A totally touch screen panel with easy to use interface.
- The panel takes 2 x 12v 7amp batteries
- Compact & convinient enclosure.
- Supports up to 15 repeater panels.
- 4 on-board relays and 2 sounder circuits.
-
Hyfire HFW-W2W-01 Wireless Translator Module
- Hyhire wireless translator module.
- Gateway between Hyfire wireless devices & control panel.
- Loop powered.
- Compatible with up to 7 expander modules.
-
HyFire HFW-EM-01 Wireless Expander Module
- Wireless signal expander for Hyfire system.
- Compatible with dynamic, static and conventional translators.
- IP protection for mounting in challenging environments.
- Capability for 32 wireless field devices per expander.