Fire Alarms
Showing 1301–1350 of 1641 results
-
Linian Coaxial Clip – Pack of 100
- For CCTV, AV and Satellite TV installations.
- Resists tensile loads of 244N.
-
Linian Fire Cable Clips – Pack of 100
- 70% quicker than conventional fire clips
- Suitable for single or double cable runs
- Available in Red, White or Black
-
LINIAN NanoClip Fibre Optic Cable Clip – Pack of 100
- 18th Edition compliant cable clip.
- Secure, single-component design.
- Quick & easy installation.
- No plastic.
- Melt point >1200°C.
- No plugs, screws or washers needed.
- Corrosion-Resistant, UV Stable Coating.
- Suitable for indoor or outdoor use.
- Discreet and barely visible.
- Made in Britain.
-
Linian SuperClip for Conduit, Armoured or Grouped Cables – Pack of 25
- Rapid fixing clips for Conduit, Armoured or Grouped Cables.
- Fast – 70% quicker to install than traditional methods.
- Sold in packs of 100.
-
Linian T&E Clip for Flat Twin & CPC Cabling – Pack of 100
- Twin, cpc cabling and PVC trunking.
- Anchor fixings for wire etc.
- Corrosion Resistant – UV Stable.
- Fire Rated.
- 18th Edition Compliant.
-
Locking Cap For AlarmSense Sounder Bases In White
- The secure design of the 45681-294 locking cap ensures tamper-resistant protection for AlarmSenses sounder or sounder/beacon bases
- Provides a discrete appearance for AlarmSenses sounder or sounder/beacon bases when used without a detector
-
Zeta Long-Range Flame Simulator for Flame Detector Testing
- Extremely long range fire simulating (<30m for Triple IR(IR3) or <15m for UV/IR)
- Safe testing without the need to ignite a dangerous real flame fires
- Suitable for both hazardous area and non-hazardous areas
-
Loop Driver Card For Advanced MxPro 5
- This product is obsolete and has been replaced by the Advanced MxPro5 Next-Generation Loop Driver Card
- Loop card to expand the capacity of a MxPro 5 panel
- Version available which supports the Apollo, Hochiki & Argus Vega protocols or the Nittan protocol
-
M2 3A Fused Spur Fire Alarm Isolator Keyswitch
- Double pole key operated switch
- 13A fuse fitted as standard
- Neon indicator
- Printed "FIRE ALARM"
- Knock outs in all sides and base
- Fitted earth terminal in base capacity 2.5mm²
-
M6 Nut (for fitting clip to end of threaded rod)
M6 Nut (for fitting clip to end of threaded rod)
-
M6 Rod adaptor (for fitting clip to side of rod)
M6 Rod adaptor (for fitting clip to side of rod)
-
M8 Nut (for fitting clip to the end of threaded rod)
M8 Nut (for fitting clip to the end of threaded rod)
-
M8 Rod adaptor (for fitting clip to side of rod)
M8 Rod adaptor (for fitting clip to side of rod)
-
Marine Mounting Base for Base Mounted Flame Detector
- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Marine Series 65 Mounted UV Flame Detector
The Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.
-
Maxitone Addressable Sounder Flasher
- High output
- 16 selectable alarm tones
- Volume control
- Backwards compatible with Zeta Standard Protocol (link)
-
MBB-2 Hochiki Mounting Back Box with Glands (Ivory or White)
- 4 cable entry holes suitable for cable glands (2 glands supplied).
- Colour matched to ivory or white detector range.
- Approved Sensor and Base range.
- Provides moisture and dust resistant fixing.
- Ideal for bulk-head fixing.
-
Menvier MFBGKEY3 Call Point Test Key, Single Key
- Test key for Menvier manual call point.
- Pack of 10.
-
Menvier Surface Manual Callpoint C/W Backbox Optional Weatherproof (CX201, MBG914, FX201)
Key Features
- High visibility status LED
- Standard and weatherproof versions available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast fit clip on front cover
- Single tool for test and access
-
-
MKII Conventional Remote LED Indicator
- Each indicator can be programmed for one device or up to 12 devices
- Each indicator will be connected directly on to the detection loop
-
Morley 797-021 Fire Alarm Panel Spare Key, Pair
- Spare keys for the Morley ZX range of fire alarm panels.
- Sold in pairs.
-
-
Morley IAS MI-FHSE-S2 Fixed Heat Detector 58C
- Tri colour LED offering red, green and amber colour
- Rotary decade address switches 0 - 159
- Pure white colour to complement modern buildings
- 100% mechanical and electrical backwards compatibility
- New base design to complement the detector
-
Morley MAx 1 Loop Addressable Panel
- Single loop panel.
- 7” touch screen display.
- 750mA loop capacity.
- Networkable up to 64 panels or 128 loops.
-
Morley MAx 2 Loop Addressable Panel
- 2 loop panel.
- 7” touch screen display.
- 750mA loop capacity.
- Networkable up to 64 panels or 128 loops.
-
Morley MAx 4 Loop Addressable Panel
- 4 loop panel.
- Expandable to 8 loops.
- 7” touch screen display.
- 750mA loop capacity.
- Networkable up to 64 panels or 128 loops.
-
Morley ZXSe Analogue Addressable Panel
- Multi-protocol.
- Modular concept.
- Simple, robust design to EN54 Parts 2 & 4.
- Intuitive to use.
-
Morley-IAS Addressable Manual Call Point with Optional Short Circuit Isolator
- Addressable manual call point for DX Connexion panel range.
- Optional built-in short circuit isolator.
-
Morley-IAS DX Connexion 1 Loop Addressable Panel
- Single loop addressable panel from Morley-IAS.
- Multi-protocol support (XP95, ESP or System Sensor).
- All programming can be done via panel and/or software.
- Networkable with other DX Connexion panels.
-
Morley-IAS DX Connexion 2 Loop Addressable Panel
- 2 loop addressable panel from Morley-IAS.
- Multi-protocol support (XP95, ESP or System Sensor).
- All programming can be done via panel and/or software.
- Networkable with other DX Connexion panels.
-
Morley-IAS DX Connexion 4 Loop Addressable Panel
- 4 loop addressable panel from Morley-IAS.
- Multi-protocol support (XP95, ESP or System Sensor).
- All programming can be done via panel and/or software.
- Networkable with other DX Connexion panels.
-
Morley-IAS MI-PSE-S2 Intelligent Optical Smoke Detector
- New mechanical platform with revolutionary chamber offering improved false alarm immunity.
- Tri colour LED offering red, green and amber colours.
- Pure white colour to compliment modern buildings.
-
MZAOV Two Zone Extension Card
- Two zone extension card for MZAOV control panels.
- Provides two additional detection zones and two additional actuator outputs.
-
Network Module for Taktis Vision EMS FireCell Panel
- Expand the Taktis 2 Loop EMS FireCell Control Panel with network capability.
- One network module required for every panel in the Taktis network.
-
Newlink HQ USB to Serial 9 pin (RS-232) Adapter Cable
- USB to Serial converter compatiable with most serial fire panel leads.
- Allows PCs with USB only ports to work with serial leads.
-
Nexus Pulse EN Certified High Output Sounder & VAD Beacon
- High output of 105 or 110dB (depeding upon version)
- Conforms to EN54-23
- White or Red flash versions available
- Synchronised Flash
-
Nittan EVC-P Evolution Conventional Optical Detector
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Indoor Manual Call Point
- Resettable manual call point for Nittan Evolution protocol
- IP24 rated housing, suitable for indoor applications
- DIL switched addressed
-
Nittan Evolution Addressable Input, Output or Combined Module
- Input, Output or Combined Module.
- EEPROM Addressed (Programmer).
- Housing fits MK II Gang Pattress Box.
-
Nittan Evolution Outdoor Manual Call Point
- Resettable manual call point for Nittan Evolution protocol
- IP67 rated housing, suitable for outdoor applications
- Backbox has knock-outs and M20 threads for easy fit of cable glands
-
Nittan Evolution Combined Optical Smoke & Heat Detector
- Optical Smoke and 54°C (A1R) Heat Sensors in one housing.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
ActiV Conventional Optical Smoke Detector
- High-quality optical smoke detector
- Drift compensation functionality
-
ActiV Conventional Heat Smoke Detector
- Heat Class A1r, A2 & B
- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
-
ActiV Conventional Multi-Sensor Fire Detector
- Optical + heat multi-sensor
- Drift compensation functionality
-
Kidde Commercial Conventional Optical Smoke Detector
- Programmable smoke sensitivity levels for tailored detection
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility for easy status monitoring
-
Kidde Commercial Conventional Heat Detector
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility with a 360° viewing angle
- Three programmable operating levels for versatile applications
-
Kidde Commercial Conventional Multisensor Detector
- Integrated photoelectric and heat detection technology
- Programmable smoke sensitivity levels for enhanced adaptability
- All-round LED visibility for easy status indication