Fire Alarms
Showing 1451–1500 of 1641 results
-
Kentec Syncro View Local LCD Repeater Panel
- Large 240 x 64 pixel graphic LCD display with full Syncro panel replication
- Connect up to 15 repeaters per panel via simple two-wire RS485 connection
- Available with 24V DC or 230V AC power options and enable control keyswitch
-
-
Soft Pack Document Holder
- Incorporates eyelet hanging point for secure fixing.
- Roomy A4 capacity.
- Screen printed front panel for easy identification.
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solo 100 Fiberglass 4 Section Telescopic Pole – 4.5 Metres
- Four sections
- Extends from 1.26m to 4.5m
- Enables access to detectors fitted up to 6m / 20'
- Accepts three Solo 101 to reach 9m / 30'
-
Solo 101 Fibreglass Extension Pole – 1.13 Metres
- Single section 1.13m / 3.5’
- Enables access to detectors fitted up to 2.5m
- Connects to Solo 100, Solo 108 or additional Solo 101s for greater heights
-
Solo 108 Fibreglass 2 Section Telescopic Pole 2.5 Metres
- Twin section
- Extends from 1.26m to 2.5m / 8’
- Enables access to detectors fitted up to 4m+ / 13’+
- Accepts additional Solo 101’s for greater heights
-
Solo 110 Urban 1.75m 4 Section Telescopic Pole
- Extends to 1.75 metres to provide maximum reach of 3 metres.
- Can be used with up to 3 Solo 111 extension poles.
-
-
Solo 461 Cordless Heat Detector Test Kit
- Battery powered
- No cables or cords – completely portable
- Directs heat straight at detector
- Suits fixed temperature and rate of rise and combination detectors up to 194°F / 90°C
- Set detectors into alarm within seconds
- Rechargeable – even from vehicle
- Safe for use at low level or at heights
-
Solo 460 Cordless Heat Detector Heat Unit Only
Solo 460 Cordless Heat Detector Heat Unit Only
-
Solo 200 Universal Detector Removal Tool
- Universal design - suits most detectors.
- Suitable for use on angled ceilings.
- Lightweight.
- Compatible with Solo access poles.
- Lifetime warranty.
-
Solo 240V or 110V Mains Heat Detector Tester
- Suits fixed temperature and rate of rise and combination detectors up to 194°F / 90°C.
- Set detectors into alarm within seconds.
- Safe for use at low level or at heights.
- Rapid activation times.
- Lightweight and simple to use.
- Designed for use at height and at angles.
- Supplied with 5m / 16ft cable (additional 5m / 16ft cable available).
-
Testifire 1001 Smoke/Heat Kit
- This product is obsolete and has been replaced by Testifire XTR2 Connected Smoke & Heat Detector Test Kit
- Fast Dual Testing
- Less Equipment to carry around
- Fully compatible with solo poles
- No Pressurised cans of gass needed
-
Solo 370 Lithium Ion Battery Pack For Solo 365 Smoke Test Head
- Rechargable battery for Solo 365 smoke test head.
- USB connection.
- Fast charge time – 120 minutes.
-
Solo 371 Smoke Generator For Solo 365 Smoke Test Head
- Field replaceable part.
- Easily fits within Solo 365.
-
Solo 372 ASD Adaptor For Solo 365 Smoke Test Head
- Adaptor fitted to Solo 365 in place of the standard clear cup.
-
Solo 425 5m Additional Extension Cable Assembly
5m Additional Extension Cable Assembly for use with the SOLO-423 & SOLO-424 Heat Detectors.
-
Solo 602 Pole Bag
- Protective carry bag for the Solo range of access poles
- Store 1 x Solo100 or 1 x Solo108 or 3 x Solo101.
-
Solo 610 Protective Carrying / Storage Bag
Storage bag designed to fit all product range. Seperate pole bag included.
-
Solo 611 Protective Urban Backpack includes Pole Bag
- Velcro ajustable compartments
- Fits one Solo or Testifire head unit & necessary accessories
- Includes compartment for laptop or tablet
- Features drinks bottle holder
- Padded back and adjustable straps allow for ultimate fit and comfort
-
Solo 612 Urban Pole Bag
- Storage pole bag for Urban range of Solo poles
- Store 1 x Solo 110 or 3 x Solo 111 poles
-
Solo 726 220 / 240v Mains and Car Charger
- 220/240v mains and car charger
- Compatable with Solo-460 mains heat detector tester
-
Solo 727 Mains & Car Charger for Solo 770 & 760 Batteries
- Fast charges in less than 90 minutes.
- Can be used via mains power or in-vehicle outlet.
- Compatible with Solo 770 & 760 battery batons.
-
-
Solo 823 9m Smoke & Cordless Heat Detector Test Set
- Smoke & heat detector testing plus head removal kit
- 9m reach
- Aerosol based tester canisters
-
Solo 365 Urban Smoke Detector Test Kit (5 Metres)
- Compact Solo 365 smoke detector test kit
- Convinient - Less disruption when testing, quicker movement between & around sites
- Compact - All your test kit, including our new short poles, in a sleek compact backpack
- Practical - Lightweight design allows fast and ef cient testing up to 5 metres
-
Solo Heat Detector Tester Baffle for Fike Detectors
- Baffle for testing Fike Detectors Effectively with SOLO Heat Detector Testers
-
Sonos Conventional Sounder & LED Beacon
- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos Open Area Beacon with Isolator
- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
Soteria SA5000-400 Heat Detector
- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Apollo Soteria Dimension Optical Smoke Detector
- Low profile design
- Utilises digital CoreProtocol communications
- Compatible with Discovery and XP95 systems*
- Integrated switchable isolator as standard
-
Soteria SA5000-600 Optical Smoke Detector
- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Spare Glass For MR20640 Break Glass Key Box
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Stainless Steel Cable Tie Tensioner, Black Sideways Style
- Manual tensioning and cutting tool for stainless steel ties.
- Suitable for steel ties up to 7.9mm wide and 0.3mm thick.
-
-
Haes AOV Smoke Vent Control Panel
- Single zone conventional or Twin Wire detection circuit
- Vent status indications & controls
- 3A, 5A or 10A integral PSU
- High spec versions include all available inputs & outputs in a single, off the shelf unit (see Technical Specification)
- False alarm management mode included in all models
-
STI ReSet Call Point Replacement Key
- Black plastic STI reset key.
- Sold individually or in packs of 10.
-
STP Surface Mounted Red Dome PANIC ALARM Button
- P66 Ingress protection.
- Impact rating – 20J.
- Momentary contact.
- RoHS Compliant.
- M16/20 pre-moulded conduit knockouts.
-
StroBell Combined Fire Alarm Bell With White LED Beacon
- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Single point of installation minimises wiring and associated costs
-
Sycall Reset/Test Key – Set of 10
- Spare reset keys for Sycall manual call points
- Sold in packs of 10
-
Zeta Flush Mount Bezel for CP4 Series Manual Call Points
- Bezel to flush mount Zeta CP4 series indoor manual call points
- Sold Individually
-
Sygno-fi Wireless Translator Module in White or Black
- Loop powered or via external power supply unit.
- Mesh expander technology programmable for redundant path to the translator.
- Site programmable via internal keypad, or via wireless or wired PC connection.
- Full system programming capability from the translator.
-
Sygno-fi Wireless Expander Module in White or Black
- Compatible with Sygno-fi translator and conventional translators.
- Up to 32 wireless field devices per expander.
- Requires external power supply unit.
-
Sygno-fi Wireless Conventional Expander Module in White or Black
- Compatible with wide range of conventional and addressable systems.
- External PSU powered.
- Devices are fully monitored for alarm and fault.
- Dual channel redundancy.
- Long communication range (≅ 1 km in open air).