Fire Alarms
Showing 1601–1650 of 1944 results
-
Hochiki CDX Conventional Mounting Base
- Integral remote indicator output
- Low profile, only 8 mm
- Rugged design and electronics free
-
Hochiki Conventional Schottky Diode Base in Ivory or White
- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
-
Hochiki CDX Conventional Photoelectric Smoke Detector
- Removeable High Performance Chamber
- Remote Indicator Output
- Low Profile Design
- Available in White
-
Hochiki CHQ Adaptor For New CHQ Modules
- Allows the PCB Component of CHQ Modules to be Housed
- Footprint Matches Older Enclosure Sizes
-
-
Hochiki CHQ Module Backbox
- Increases CHQ "Smart-Fix" Modules IP Rating to IP69
- Robust and Durable
- 10 Knock outs for Glanded Cable Entry
-
Hochiki CHQ-WSB ESP Addressable Wall Sounder Beacon in Red or White
- Loop powered adderssabel Hochiki sounder beacon
- 51 User-Selectable Tones
- Available in Red or White
-
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki Conventional Beacon
- High Intensity LED technology
- Colour-matched to existing Ivory and White detector and base ranges
- Fits standard CDX base (YBN-R/6)
-
Hochiki DIN Mounting Box Small or Large
- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
-
-
-
Varta CR2032 3V Lithium Battery, Pack of 5
- 3V nominal voltage with 230 mAh capacity
- Wide operating temperature range -20°C to 70°C
- Compact coin cell design 20mm diameter
-
Ekho Back Box for EK-WL8-TRH/EXP/OUT
- Optional deeper back box for rectangular Ekho modules
- Includes two cable glands for convenient setup<
- Unit colored in ivory with a lens color that emits no light and does not allow tone specification
-
Ekho Back Box for EK-WL8-IN
- Meets EU standards
- Multiple knockout connections
- Includes sticky pads
-
Ekho Wireless Survey Kit
- Comprehensive kit for surveying hybrid wireless installations
- Includes portable translator, wireless smoke sensor, and signal-display keypad
- Robust carry case for easy portability and storage
-
Hochiki ESP Analogue Single Input Monitor
- Single un-monitored input.
- Non-polarised loop connections.
- Sleep mode for low power consumption.
- Monitor LED (when fitted) - flashes when unit is polled, continuously illuminated in alarm.
-
Hochiki ESP Intrinsically Safe Sounder Interface Module With DIN Rail Option
- Provides Dual Sounder Circuits
- Fault Monitored Input
- Requires 24VDC External Power Supply
- Available in DIN Module
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki ESP Sub Box Assembly
- Dobust DesignÂ
- Compatible with all CHQ Modules
- Used to Replace Damaged Components
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki Installation Kit for YBN-UA / YBO-UA(WHT) (YYA-A)
- For use with YBN-UA Recess Mounting Adaptor.
-
Hochiki Manual Call Point Key (Pack of 10)
- Comes in Pack of 10 Pcs
- Key for Hochiki Call Points
-
Hochiki PL-2 Legacy Device Programming Lead Programming Lead (Jack Plug to Croc Clip)
- Allows Hochiki TCH-B200 to program legacy ESP devices.
-
Hochiki PL-3 Additional Programming Lead 3 Way Connection
- For use with Hochiki devices with square connector
- Allows connection of TCH-B200 programmer
-
Hochiki Recess Base Adaptor (required YYA-A)
- Allows base and analogue sensor or conventional detector to be flush mounted.
- Supplied with fixing brackets.
- Colour-matched to existing ivory and white sensor/detector ranges.
- Sturdy construction, easy to install.
- Suitable for a maximum ceiling thickness of 30mm.
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SI/CAP2 Base Sounder or Isolator Cover
- Protects wiring terminals on isolator bases and base sounders
- Easy to fit
- Available in Ivory or White
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki SR/Y Mounting Box for Hochiki Manual Call Points
- For surface mounting of the HCP call points
- Standard red or Yellow
- 32mm deep
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
Howler Site Alert RF Heat Detector
Key Features
- Simple to configure and re-configure using dip switches
- Powered using easily sourced, low cost alkaling batteries
- Disconnection and battery status reflected by the site alert RF master unit
- Radio linked via the master unit to manual call points
- Can link to 31 units
- Radio frequency with 868 Mhz class 1 receiver
- Battery Operated - no mains power required
- Weatherproof design
-
Howler Site Alert RF Wireless Site Alarm
- Wireless Linking - Up to 30 units can be linked – no trailing wires
- Weatherproof - Push on/push off switch operation
- Loud - 100dB at 1 metre.
-
Hyfire Economy Single Loop 16 Zone Control Panel
- Economy Hyfire control panel.
- 16 zonal LEDs.
- Available with option keyswitch.
-
Toccare Mini Lite Half Loop Touch Screen Control Panel
- A totally touch screen panel with easy to use interface.
- The panel takes 2 x 12v 7amp batteries
- Compact & convinient enclosure.
- Supports up to 15 repeater panels.
- 4 on-board relays and 2 sounder circuits.
-
Hyfire HFW-W2W-01 Wireless Translator Module
- Hyhire wireless translator module.
- Gateway between Hyfire wireless devices & control panel.
- Loop powered.
- Compatible with up to 7 expander modules.
-
HyFire HFW-EM-01 Wireless Expander Module
- Wireless signal expander for Hyfire system.
- Compatible with dynamic, static and conventional translators.
- IP protection for mounting in challenging environments.
- Capability for 32 wireless field devices per expander.
-
Hyfire HFW-PA-05 Wireless Dual Optical Smoke Detector
- Advanced dual path optical chamber design.
- Internal algorithm processing optimises performance.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Hyfire HFW-TA-05 Wireless Heat Detector
- Hyfire wireless heat detector.
- Multiple sensitivity settings.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Hyfire Static Wireless Sounder Base
- Wireless operation with 150m range
- 32 sounder tones with dual volume levels
- 3 year battery life with standard lithium batteries
-
-
Hyfire HFW-SBCW-05 Base Sounder Cover Plate
- Blanking cap for Hyfire sounder or sounder/beacon bases.
- Compatible with HFW-BS-05 or HFW-BSB-05 bases.
-
Hyfire HFW-PB-01 Spare Primary Batteries, Pack of 10
- Primary battery cell for Hyfire Static devices.
- Sold in packs of 10.
-
Hyfire HFW-SB-01 Spare Secondary Batteries, Pack of 10
- Secondary battery cell for Hyfire Static devices.
- Sold in packs of 10.