Fire Alarms
Showing 1751–1800 of 1944 results
-
Apollo Orbis Conventional Heat Detector
- Wide range of heat detector classes for various conditions
- Rate-of-rise and static temperature detection capabilities
- Open-web casing for improved air flow and temperature measurement
-
Orbis Intrinsically Safe (IS) Galvanic Barrier
The Orbis (IS) Galvanic Barrier is installed in the safe area and ensures system integrity. -
Orbis Intrinsically Safe (IS) Heat Detector
- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs
-
Orbis Intrinsically Safe (IS) Multisensor Detector
- Reduces false alarms.
- Sensitive to fast burning, flaming fires.
- Improved sensitivity to black smoke.
- Compensation for slow changes in sensitivity.
- Algorithms for reliability of alarm.
-
Orbis Intrinsically Safe (IS) Optical Smoke Detector with Optional Flashing LED
- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- Wide angle optics respond well to a wide range of fires
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state -
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
Panasonic CR123 3V Lithium Battery
- Panasonic CR123A battery cell
- Used in many wireless fire alarm devices
-
PENN Peripheral Expanson Network Node For Advanced MxPro 5
- Lets you install peripherals in remote locations without an additional panel.
- Network in-built – either Standard or Fault Tolerant.
- Up to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configuration.
-
Plastic Fronted Break Glass Key Box
- Tough plastic protects emergency keys until required
- Keys visible at all times through transparent plastic
- Can be easily wall mounted
- Dimensions: Approx 110mm (H) x 104mm (W) x 30mm (D)
- Weight 84grams
-
-
Printer Assembly For Advanced MxPro 5
- Fast instant response.
- Fast and silent operation.
- Thermal printer.
-
Prism For Fireray Reflective Infrared Beam Detectors
- Replacement single reflective prism for use with the Fiureray range of reflective beam detectors from FFE.
-
Prism Heater For Fireray Reflective Prisms in White or Black
- Ultra slim heating pad.
- Designed to prevent the build-up of condensation.
- For use in temperature controlled storage areas and cold environments.
-
Protective Cage for Fireray One
- Protective cage for the Fireray One beam detector.
- Suitable for use with either 1260-000 back box or to a flat surface.
-
PS200 Hinged Cover For KAC Manual Call Points
- Protects agains unwanted activations
- Clip on fitting
- Clear perspex
-
Reflective Detector Ceiling Mount for Fireray One or Fireray 5000
- Ceiling mounting bracket for FFE reflective detector heads.
- Suitable for Fireray One or Fireray 5000.
-
Reflector Adjustment Bracket for 1 or 4 Prisms
- Prism plate and adjustment bracket for 1 or 4 prisms.
-
Reflector Wall Bracket for Fireray Prisms in White or Black
- Surface mount plate for Fireray prisms.
- Hole pattern suitable for either 1 or 4 prisms.
- Available in white or black.
-
Advanced MxPro5 Remote Battery Temperature Sensor
- Simple to install
- External battery monitoring
- Compatible with MxPro 5 panels
-
Replacement Keys for SX, Prem AD and Plastic Simplicity Panels
- Replacement plastic "Control Enable" keys for Premier SX, Premier AD & Plastic Simplicity panels (x2 black).
-
Replacement Dust Filter for Kidde Stratos Nano, Stratos Micra 10, 25 & 100
- Compatible with Nano, Micra 10, Micra 25 and Micra 100.
- Compatible with Senator Nano, 10, 25 and 100.
- Compatible with LaserSense Nano, 10, 25 and 100.
-
Replacement Metal Locking Keys for Simplicity and Quatro Panels
- Replacement Metal Locking Keys for Simplicity and Quatro Panels.
-
Zeta CP2 Call Point Key
- Replacement plastic keys for Zeta CP2 call point (old model)
- Sold individually
-
Zeta Reset Key For CP4 Manual Call Points, Pack of 10
- Reset key for Zeta CP4 manual call points.
- Sold in packs of 10.
-
Resettable Element Kit For Eaton Call Ponints (Pack of 10)
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Resistor Kit For Fire Alarm Engineers
- Boxed kit of most popular fire alarm panel resistors & capacitors
- Includes a total of 160 mixed resistors & capacitors
-
Responder 24 Electromagnetic Fire Door Closer
- Universal handing with hygienic plug and go wiring system
- Hold open or swing free modes with EN4 power size rating
- 60 minute fire test certification with 5 year guarantee
-
Rutland 600mm Extended Door Loop
- Extended loop cable designed for push-side applications with Responder 24
- Facilitates installation where switch box mounting requires additional cable length
- Compatible with frame or wall mounting configurations
-
Rotary Fire Alarm Bell
Rotary Fire Alarm Bell
With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.
- Suitable for internal and external use
- Sound output: 60dB at up to 35m
- Quick and simple to install
-
Routing Termination Card For Advanced MxPro 5
- Routing Termination Card For Advanced MxPro 5 panels.
-
Rutland Easykam 180 Opening Angle Door Closer
- Variable power size EN 2-4
- Ezykam™ motion technology
- Universal installation application
-
Rutland IP-114 Fire Smoke Seal Gasket
- Intumescent pack for Rutland ITS 11204 concealed closers.
-
Rutland ITS 11204 Concealed Cam Action Door Closer
- Concealed cam mechanism
- Variable power size EN 2-4
- Universal fitting
-
Rutlands TS.FIRETRAK.114 Electromagnetic Slide Arm Closer
- Variable power size EN 2-4
- CE marked
- Universal fitting
-
Sampling Chamber For VESDA-E VEP & VEU Aspiration Detectors
- Replacement sampling chamber for VESDA-E aspiration detectors.
- Compatible with the VEP and VEU ASDs.
-
Savex Slimline Document Holder
- A4 Document Size
- Powder Coated Finish
- Hooks for Key Storage
- Complete with Fire Safety Documents Label
-
Semi-Flushing Bezel For Advanced MxPro 5 Panels
- Semi flush fitting for all MxPro 5 panels.
- Picture frame effect for ease of installation 30mm flange for control panels, 20mm for repeaters.
-
Series 65 Conventional Duct Smoke Detector
- For use with Series 65 or Orbis detectors
- Operates in air speeds of 0.5m/s to 20m/s
- Transparent cover to view detector head LED
- Integral smoke test port
- Volt-free contacts
-
Sigma CP Sounder Controller Unit
- Two wire serial connection
- 230V AC or 24V DC powered versions
- All outputs monitored for open and short circuit faults
- Fully monitored by main control panel
- Up to 8 outputs with 1A available from each
- Boxed units in enclosure to match Sigma CP control panels
- Up to 7 sounder boards per system
- Zoned, 2-stage or common alarm
- Individual open and short circuit fault indicators
- Class change input facility
- Can be connected to serial bus with Ancillary boards and repeaters
- Power fault input for monitoring remote power supplies
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
-
SmartCell Call Point Breakable Tag, Pack of 50
- Pack of 50 breakable tags for SmartCell wireless call points
- Designed to work seamlessly with SmartCell wireless systems
- Compact physical dimensions of 8 x 51.5 x 0.5 mm (W x H x D) for easy installation and use
-
SmartCell Call Point Key, Pack of 10
Enter a brief description of your prod- Pack of 10 call point keys for SmartCell wireless systems
- Designed to work seamlessly with SmartCell wireless call points
- Compact dimensions of 22 x 60 x 7 mm (W x H x D) for easy handling and storage
-
SmartConnect Mulit-Loop RS232 Printer Module
- Designed to EN54 requirements
- Use to interface to RS232 devices
- 5V aux output (ofr use with panel printer only)
- Extensive front unit indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop 6 Way Conventional Zone Monitor
- Designed to EN54 Part 2
- 6 x Conventional Zones
- Each zone is monitored for open & short circuit
- Extensive front unit status indications (see table below)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Each zone input can be configured as either Alarm or Technical Alarm
-
SmartConnect Multi-Loop Alarm Circuit Module
- Can be configured as an alarm output or a power output
- 2 x output circuit (500mA each)
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Power limited