Fire Alarms
Showing 1901–1944 of 1944 results
-
Xtratone Conventional Combined Wall Sounder Beacon
- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
- Flashing Rate 0.5Hz
-
Xtratone Conventional Wall Sounder
- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
-
YBO-R/SCI Hochiki ESP Short Circuit Sounder Mounting Base in Red or White
- Features short circuit isolator
- Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
- Available in Red or White
-
Yuasa NP 12V SLA Fire Alarm Batteries
- 1.2-17ah battery options.
- Market leading battery manufacturer.
-
Yucel 12V SLA Fire Alarm Batteries
- Yucel 12V SLA batteries.
- Available in 9 or 14ah.
- Increased capacity in 7 or 12ah form factor.
-
Zerio Plus Panel Stub Antenna
- Replacement antenna for Zerio Plus control panels or wireless booster.
-
Zerio Plus SMS Module – Internal & External
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Zeta Addressable Sounder Base
The CSB sounder base has been designed to achieve a higher number of units to be accomodated on the loop. A maximum of 64 units are now loop powered accross the whole range of Zeta Analogue Addressable panels.
-
Zeta Battery Operated Heat Detector
- Photoelectic sensing technology (ZT-ST5 & ZTST5/10)
- Electronic thermistor sensing technology (ZT-TH5)
- Easy installation and maintenance
- Sealed Battery case of the back available (with 10- year Li Battery model)
- SMD circuit board design - quality and reliability guaranteed
- Low-battery warning
- Test button verifies battery and alarm operation
- Loud alarm signal of exceeding 85 dB in alarm mode
- Five-year limited warranty
- HUSH button, to stop the alarm from sounding
- 10-year Long-life lithium battery (ZT-ST5/10 only)
- The power supply will be cut out automatically when removing the detector from the base
-
Zeta Beam Xtra Motorised Reflective Optical Beam Smoke Detector
- Motorised self-aligning technology eliminates manual adjustment requirements
- Ultra-low power consumption at just 3mA constant current operation
- Flexible range options from 7m to 160m with extension kits available
-
Anti-Fog Kit for Firebeam Xtra/BLUE
- Anti-fog lens coating
- Reduces false alarms
- Suitable for humid environments
-
Zeta Call Point Key for CP3 Series Call Points
- Replacement key for CP3 MCPs
- Black plastic
- Sold invidually
-
Zeta CP3 Addressable Manual Call Point
- Available in both indoor & ourdoor (IP67) versions
- Supplied with back box for surface mounting
-
Zeta CP3 Conventional Manual Call Point
- EN54-11 approved conventional manual call point
- Surface mounted (includes back box) or flush mounted with optional bezel
- Positive activation that mimics the feel of breaking glass
- Simple key to reset operating element - no broken glass
-
-
Zeta Duct Unit Enclosure
- Monitors air in a ventilation duct.
- Supplied with 2 probes (650mm & 320mm).
-
Zeta Fire Alarm Duct Unit c/w 12V Relay Board
The ZT-DU/12 enclosure c/w Fyreye base and relay board with form C relay outputs for alarm and for fault which requires 12V power supply.
-
Zeta Fire Alarm Duct Unit c/w 230V Relay Board
The ZT-DU/230 enclosure c/w Fyreye base and relay board with form C relay outputs for alarm and for fault which requires 230V power supply.
-
Zeta GSM Fire Alarm Communicator
- SMS text message fire alarm notifications via GSM network
- Four programmable inputs with two user-definable outputs
- Remote output control via phone call and password
-
Zeta Intrinsically Safe Flame Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Zeta Intrinsically Safe Optical Smoke Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Zeta Intrinsically Safe Programmable Heat Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Zeta Mark 1 Addressable Common Sounder Flasher Base c/w Isolator
The CSB sounder base has been designed to achieve a higher number of units to be accomodated on the loop. A maximum of 64 units are now loop powered accross the whole range of Zeta Analogue Addressable panels.
-
Zeta Reflective Beam Smoke Detector Range Extension Kit
Extension kit for the Zeta Reflective Beam Smoke Detector, extending the device range up to 80 metres.
-
Zeta Securetone 2 Conventional Beacon
- Low consumption conventional beacon
- Low profile platform design which can be used standalone or with a detector
-
-
Zeta ZT-DR24 Magnetic Door Holder with Bracket
- Tested according to EN1155 for certified fire safety compliance
- Fail safe security setting ensures door closure during power failure
- Low power design with 85mA current consumption for energy efficiency
-
Ziton Addressable Base Sounder in Polar White
- Detector and sounder from a single wiring point – minimising installation costs
- Powered directly from the ZP loop
- Up to 60 detectors with sounders directly on the loop
- Separate addresses selectable for detector and sounder
- High efficiency sound gun transducer
- Compatible with all ZP loop devices
- Laser alignment aid in the receiver head
- Wide range of international sound types and frequencies
- EN54:3 approved and CPR certified
-
Ziton Conventional Fire Panel Supervised or Unsupervised Relay Board
- Bus Type Easy Cable Free Installation
- Output Delay per Output
- "AND" "OR" Programming Functionality
- Powered from Panel Bus
-
Ziton Conventional Optical Smoke Detector
- Approved to EN54 Part 7 and CPD certified
- Low profile conventional design
- Head out continuity support
- Range of surface bases
-
Ziton FDD710 Single Pipe Universal Duct Detector
- One-pipe air sampling system.
- Conventional or analogue addressable detectors.
- Test hole on cover.
- Simple installation.
- Sensitive flow indication.
-
Ziton FDD710LP 1.5m Extension Pipe For FDD710
- Used with FDD710 duct detector.
- Extra long for large ducts.
- Unique one-pipe sampling system.
- Easy installation.
-
Ziton Fire Alarm Panel Enable Key
Enter a brief description of your product here. This description will be displayed on product list pages.
-
-
Ziton Series Auxiliary Surface Mount Accessory
- Accepts conduit sizes up to 25 mm
- Compatible with all ZP7 and Z6 series detector bases
- Side and rear wiring entry
-
Ziton SPB-2 Addressable Sounder Base in Red or White
- Pluggable base for ZP755 sounder.
- First fix facility.
- Ease of installation.
- Large wiring terminals.
-
Ziton SPB-2P Plugable Base for ZP755 Sounder in White
- Ease of installation
- First fix facility
- Large wiring terinals
-
Ziton Z600 Series Conventional Heat Detector
- Aproved to EN54 Parts 5 and CPD Certified
- Low profile conventional design
- Head out continuity support
- Range of surface bases
- Plug in base with automatic locking
-
Ziton ZP7 Detector Mounting Base with Isolator
- Protects fire detection loops against short circuits
- Compatible with both enhanced and legacy systems
- Allows detector removal without disconnecting loop wiring
-
Ziton ZP7-SB1-P Standard Base for ZP7 Detectors
- Common to all ZP7 series detectors.
- Automatic locking option.
- Address identification label.
- Easy to install.
-
Identifire Pro Wall Sounder VAD
- EN54-3/23 approved 32 tone sounder with bright visual alarm device
- Four selectable volume levels with low current consumption
- Multiple mounting options including weatherproof IP67 rated base
-
Ziton ZP755HA-2 Addressable Horn Sounder in Red or White
- Wide 'all around' sound distribution.
- Microphone self test facility.
- Plug in base – no direct wiring connections.
- Up to 50 sounders directly on the loop wiring.