Fire Alarms
Showing 1251–1300 of 1944 results
-
ACT 2323 230V Mainspike Suppressor
- Provides up to 4,500 Amp continuous spike protection across live, neutral and Earth.
- Protects against nearby lightning causing false alarms and system malfunctions.
- Protects all security and fire alarm panels, CCTV cameras, access control equipment and security lighting.
-
-
ACT 415B Premium Multimeters Test Leads
- Premium test leads to suit most multimeters.
- Replacement leads for ACT/6000.
- Moulded PVC constuction with highly flexible, tangle resistant silicone cable.
- 4mm right angle plugs.
- Insulated test probes - gold plated.
- CAT IV rated.
- Overall length 1.2m.
-
ACT 418 Professional Multimeters Test Leads
- Professional test leads to suit any multimeter.
- Suitable for for ACT/6000.
- Constructed of highly flexible silicone cable.
- Retractable 4mm Plugs.
- Fully Insulated Probes with Attachable Crock-Clips.
- Overall length 1.2m.
-
ACT 6000 Alarm Engineers Autoranging Digital Multimeter
- Fully autoranging.
- Both AC and DC voltage measurement.
- Three ranges are provided for current measurement of either AC or DC current.
- Simple operation.
-
ACT 612 6V or 12V Intelligent Battery Tester
- Test SLA, GEL & FLOODED.
- For 6V & 12V battery models.
- Simple Operation.
- DC Voltage and Ah Capacity Results.
- When to Recharge or Replace.
-
ACT Battery Tested Labels, Roll of 250
- Each roll contains 250 labels
- Insertions for Temperature, Volts, Ah Readings, User Initials and Date Tested
-
ACT CPS3 Fire Alarm Control Panel Suppression Kit
- Protects metal fire alarm control panels from EMI, RFI and nearby lightning.
- Recommended to fit this kit as standard on all take-overs.
-
Addressable Maxitone Sounder Red or White
- Available in Red Or White
- 2 Available Tones
- Addressable
- IP65 Ingress Protection
-
Adjustable Wall Bracket For The Firebeam & Zeta Beam Detector
- Dual axis swivel joints mean total flexibility in aligning beam and reflectors.
- High quantiy steel consruction.
-
-
Advanced GOP-001 GO1 P-BUS Adaptor Card
- Used to connect local peripheral equipment to GO1 panels.
- PBUS modules must be configured using the PC Tool.
-
Advanced GOP-002 GO1 Access Enabled Key Switch Assembly
- Replacement access enabled key switch assembly for Advanced GO1 panels.
-
Advanced Loop Driver for MX-4400 or MX-4200 Panels
- Dual protocol support for Apollo Discovery/XP95 and Hochiki ESP detector systems
- 500mA maximum current capacity per loop during alarm conditions
- Designed for MxPro 4 analogue addressable fire alarm panels
-
Advanced Mx Pro Logo Programming Software
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Advanced MX Upload / Download Lead
- RS232 9-way to 3-way connector
- MxPro 4 & 5 panel compatibility
- Serial upload/download functionality
-
Advanced Semi-Flushing Bezel for MxPro 5 Remote Terminals
- Semi-flushing bezel for MxPro 5 remote terminal displays
- Supplied with fitting kit for a quick and easy solution
-
Advanced MXP-532 General Routing Interface
- Two fire routing outputs.
- Outputs are monitored for open and short circuit wiring issues.
-
Advanced MXP-554 IP Gateway LAN Interface
- Provides remote access to devices on an Ad Net network..
- Configurable event email notification.
- Compatiable with both Mx-5000 & Mx-4000 series fire panels.
- Available as PCB only or boxed in enclopsure.
- Option of standard or fault-tolerant networks.
-
Advanced MxPro 5 Access Enable Key Switch
- Enable/disable controls.
- Group isolate to disable I/O across network.
- For use to start/enable a class change.
-
Advanced MxPro 5 AlarmCalm Button with Buzzer
- Complete false alarm management with verification and investigation delays
- AlarmCalm button module for manual acknowledgement by occupants
- Compatible with MxPro 5, Go, Axis EN and AxisGo fire panel ranges
-
Advanced MxPro 5 Document Enclosure
- Designed for IP30 protection.
- AC terminal block and leads.
- Internal labelling.
- Hinge pins.
-
Advanced MxPro 5 Key Switch
- Enable/disable controls.
- Group isolate to disable I/O across network.
- For use to start/enable a class change.
- Trapped and un-trapped key switches available.
- Control of multi-sensor/device sensitivity mode change.
- Simple to install and configure.
-
Advanced MxPro 4 Ad-NeT Network Card
- True Peer to Peer
- Up to 1.5Km between Control Panels
- Windows based PC Set Up
- Network Analysis
-
-
Advanced PC-NET-015 Mx Service Tool Software
- Retrieval of analogue values, panel meter readings and event logs from the Mx control panels.
-
Advanced Spare Access Enable Key (Singular)
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Aerial for Zerio Plus SMS Module
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Agrippa Acoustic Digital Pillow Alarm
- No installation.
- Portable device.
- Listen and learn technology.
- Flashing red LED visual warning.
-
Agrippa Chain Keeper
- Bridge a gap between door and magnet.
- One metre in length.
- Flexible.
- Can be cut to desired size.
-
Agrippa Deaf Alert Home Pillow Fire Alarm
- Easy to install and set up.
- Fail-safe dual power supply.
- Smoke alarm included.
- Vibrating pad to alert the deaf, hard of hearing, children, heavy sleepers or people on medication in the event of a fire.
-
Agrippa Door Holder Extension Bracket
- Swivel bracket to allow mounting in any plane.
- Supplied with fixings to suit door holder.
- Available in three lengths to suit specific location.
-
Agrippa Floor Mounting Bracket Kit
- Sheet steel construction
- Powder coated white finish
- Dual orientation capability
-
Agrippa Sound Activated Magnetic Fire Door Holder
- Battery powered and wire-free door holder
- Listens and learns the sound of your specific fire alarm providing greater reliability
- Hygenically and discreetly installed at the top of the door
-
Agrippa Wire-Free Fire Door Closer
- Battery powered and wire free
- Will not hold in the event of a battery power cut
- Installed at the top of the door in place of a traditional closer
-
Anti-Condensation Heater for Fireray 3000 Detector Head
- Heater designed to reduce condensation on the lens of the Fireray 3000 head.
- 24V powered wutg 20W output.
-
Anti-Condensation Heater for Fireray 5000 Detector Head
- Heater designed to reduce condensation on the lens of the Fireray 5000 head.
- 24V powered wutg 20W output.
-
Anti-Condensation Heater for Fireray One
- Heater designed to reduce condensation on the lens of the Fireray One.
- 24V powered wutg 20W output.
-
MZAOV Multiple Zone Smoke Vent Control Panel
- Up to 8 smoke vent zones from a single panel
- Choice of 3, 5 or 10amp power supply
- Detection zone(s) support conventional or sav-wire devices
-
MZAOV PIR Rain Sensor & BMS Add On Card
- Provides PIR & rain sensor inputs to MZAOV smoke vent panels
- Provides input & output data for BSM integration
-
-
KAC Smoke Vent Orange Manual Call Point
- 470 ohm resettable manual call point for smoke vent systems
- Plug and play installation with dedicated terminal block
- EN54-11 compliant with tamper protection features
-
Smoke Vent Fireman’s Switch in Orange
- Simple cable access
- Surface mount for all applications
- 3-position keyswitch
-
STI 3 Position Orange Keyswitch With Smoke Vent Label
- Orange switch with "Smoke Vent" markings.
- 3 position keyswitch.
- Supplied with keys.
- Suitable for flush or surface mount installations.
-
KAC W9203 | 3-Position Rocker Switch (1-0-2) | Double Pole Centre Off | AOV Smoke Vent Control
- Three-position rockerswitch with double pole changeover and centre off position
- Available in yellow or orange housing colours for different applications
- Flush mounting design with snap-fit escutcheon plate for secure installation
-
AOV System Logbook
- Complete log book for smoke control or AOV systems.
- Logs essential details of your system.
-
Apollo 45681-204 Conduit Box
- Easy to install.
- Aesthetically pleasing.
- Colour matched to detector and base.
-
Apollo 45681-218 Deckhead Mounting Box Accessory Kit
- Deckhead mounting box accessory kit.
- Extension Sleeve and the Adaptor Ring for Deckhead Mounting Box.
-
Apollo 45681-233 Backplate
- Protects against water ingress.
- Improved performance.
- Fits Series 65, XP95, Orbis and Discovery bases.
-
Apollo 45681-238 Series 90 to XP95 Base Adapter
- Enables an existing range to be updated with ease.
- Eliminates the need for re-wiring.