Fire Alarms
Showing 1101–1150 of 1641 results
-
Fulleon Squashni Conventional Platform Sounder
- Fixing platform for detector or beacons
- Low current consumption
- Blank cover for use as a stand alone sounder
- Reduced installation cost
- Colour matched to leading manufacturers detectors
- Tamper proof cap
-
Fulleon Squashni Sounder Base Unit
- Ultra Slim Profile for Unobtrusive Installation
- Fixing Platform for Detector Bases and Other Devices
- Reduced Installation Costs
- Blank Cover for use as Stand Alone Sounder
- Colour Matched to Leading Manufacturers’ Detectors
- Choice of 28 Different Pre-Set Tones
- Volume Control
- Versions Approved to CNPP & VDS Requirements
-
Fulleon Symphoni Low Current Wall Sounder
- Low 5mA current consumption.
- 100dB(A).
- Automatic synchronisation.
- Weatherproof option.
-
Fuse Kit For Fire Alarm Engineers
- Boxed kit of most popular fire alarm panel fuses
- Includes a total of 120 fuses
-
Fyreye Addressable Rate Of Rise Heat Detector
- Rate of rise and fixed heat detection at 57°C
- Twin LEDs for enhanced alarm indication
- DIFT approved, EN54 parts 5 & 7 compliant
-
Fyreye Extra Analogue Addressable Optical Smoke Detector
- Addressable optical detector for Zeta MK1 legacy addressable systems
- Twin LEDs to improve alarm indication
-
Fyreye MKII 12V Auto Reset Relay Base
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Zeta MKII Addressable Input/Output Module
- Loop powered
- Equipped with short circuit line isolator
- Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
-
Zeta Standard Protocol Addressable Input/Output Module
- Loop powered
- Equipped with short circuit line isolator
- Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
-
Fyreye MKII Addressable Fixed Heat (CS90) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Compatible with all Fyreye MkII bases
- Addressed with dip switches or hand-held programmer
-
Fyreye MkII Addressable Input Module with S/C Isolator (loop powered)
- Loop powered (60 devices per loop as maximum)
- Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
- Equipped with short circuit line isolator
-
Fyreye MKII Addressable LED Remote Indicators
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
-
Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
-
Fyreye MKII Hand Held Programmer Tool
- 2 LED indications. One to indicate that the unit is charging, the other one indicates the status of the detector`s remote LED output.
- Battery Charge state indicator
- Auto-Off when the programmer is not operated for two minutes
- External Reset Funtion
- 20x4 Character LCD Display
-
-
Fyreye Relay Base
The Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent Addressable Manual Call Point
- Resettable or break glass.
- Lift up protective covers.
- Keyswitch
- Weatherproof version (IP67) suitable for external areas
- Up to 200 per loop
- Integral short-circuit isolator
- Surface or Semi Flush options
-
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Indoor Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent S-Quad Addressable Detector
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
-
Gent S-Quad Addressable Detector with Sounder
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice
- Dual optical heat sensor
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice & VAD Beacon
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S4-34760 Duct Smoke Sensor Housing with Sensor Base & 0.6m Tube
- Direction of flow indicated by housing.
- Single sampling tube.
- Compatible with S-Quad Sensors.
- Sampling tubes available in three lengths.
- Mounting bracket available.
- Remote LED can be installed via S-Quad monitor output.
- Air Duct uses Venturi process.
- Fully integrated into Vigilon loop.
-
Gent VS-KEY Spare Door Key for Vigilon & Compact Panels
- Spare door key for Gent Vigilon & Compact panels.
- Available individually or in packs of 10.
-
Gent Weatherproof Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
Gent Xenex 13271-08LB 8 Zone Repeater Panel
- 8 zone repeatre panel compatible with Xenex conventional panel.
- Repeat alarm information in second location.
- Maximum of only one, 8 zone repeat panel per system.
-
Gent: Call Point Test Key – Pack of 10
Key Features
- Gent - Call Point Test Key - 14112-10 (Pack of 10)
- This is a replacement Test Key for Gent Manual Call Points.
-
GeoFire Weatherproof Door Holder
- Robust steel construction
- 1200N holding force
- Sealed against water ingress
-
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
-
Haes 134 Access Control Keys, Sold In Pairs
- Access control keys for Haes control panel.
- Sold in pairs.
-
Haes 4 Way Sounder Circuit Extension Card
- Four monitored sounder circuits
- Compatible with existing sounder circuits
- Includes fault monitoring relay
-
Haes 8 Way Output Card For Conventional Panels
- 8 x switched -ve outputs
- 8 x volt free changeover relay outputs plus 8 x switch -ve outputs
- Common or zonal operation
-
-
Haes BRISOL-R Boxed Isolate Relay
- 8 amp double pole relay.
- Contacts rated at 250v ac.
- Isolate key switch.
- Isolated LED indicator.
- Option to use key switch to energise the relay.
-
Haes BRLDA Lockdown Alert Alarm Pulsing Relay
- Provides pulsing or continuous alert of the impending lockdown of a building.
- 8 amp double pole relay.
- Use with existing re control panel.
- Key switch activation.
- Alarm status LED indicator.
- ON & OFF pulsing times independantly programmable up to 15 seconds for truly customised ringing pattern.
- Suitable for surface or flush fitting.
-
-
Haes Excel-EN Network Card
- Network up to 8 control panels
- Add up to 8 repeater panels to the network
- Card also includes 6 programmable switch -ve outputs
-
Haes Fire Alarm Isolate Switch
- Complies with the recommendations of BS 5839 Pt 1 & BS EN60669
- Suitable for surface or recess fitting
- Low profile lid (15mm)
-
Haes Fire Alarm Panel 107 Spare Barrel Keys (Pair)
Spare 107 Key for Haes Fire Alarm Panel Keyswitch -
Haes LOCK801 Replacement Lock Assembly & Keys for Haes Control Panels
- Replacement lock assembly for Haes control panel.
- Included a pair of 801 keys.
-
Haes Replacement Keyswitch Assembly For Esento Evoque, Excel, Eclipse Esprint & Fusion
- Replacement / spare key and lock
- Ideal for Haes fire alarm panel doors
- Old part number: SWK107WIRED