Fire Alarms
Showing 1001–1050 of 1726 results
-
Apollo Discovery Sounder & VAD Base, White Flash, Open Category, Isolator
- EN54-23 category 'O' VAD beacon (white flash).
- Two-tone EN54-3 sounder.
- Multiple selectable volume.
- Works on XP95, Discovery & CoreProtocol.
-
Apollo Discovery Sounder Base with Isolator
- 15 pairs of tones
- It is possible to set individual volume of the sounder from the fire control panel
- Tones can be used for other purposes in addition to warning of fire, ideal for schools
- Enables soft start option, ideal for hospitals and nursing homes
- Unique acoustic and visual indicator self-test
-
Apollo Discovery Sounder Visual Indicator Base
- Individual Control of the Sounder and visual Indicator
- Tones Can Be Used for other Purpouses
- Electronic Bell Tone
-
Apollo Discovery Weatherproof Manual Call Point, KAC Style
- IP67 waterproof rating for outdoor applications
- Resettable element without break glass
- EN54-11 approved with optional short circuit isolator
-
-
Apollo Flame Detector Weather Shield
- Protects against water ingress.
- Protects sensor from direct sunlight.
-
Apollo Flameproof Intelligent IR2 Flame Detector
- ATEX certified for use in hazardous areas
- High sensitivity with class 1 detection capability
- Compatible with Discovery and XP95 protocols
-
Apollo Hinged Covers for Call Points
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo Intelligent Base Sounder
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo Intelligent DIN-Rail Input Output Unit
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Failsafe mode (meets BS 7273-4 requirements)
- Configurable input styles
- Earth fault monitoring
-
Apollo Intelligent DIN-Rail Switch Monitor
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Failsafe mode (meets BS 7273-4 requirements)
- Configurable input styles
- Earth fault monitoring
-
Apollo Intelligent Duct Smoke Detector
- Operates in Air Speeds of 0.5m/s to 20m/s
- Transparent Cover to View Detector Head LED
- Integral Smoke Test Port
-
Apollo Intelligent Flameproof IR3 Flame Detector
- ATEX certified for hazardous environments
- Compatible with Discovery and XP95 protocols
- 90º field of view with up to 40 m coverage
-
Nittan EVC-IR | Conventional Dual IR Flame Detector | Class 1 (25m), Dual Wavelength
- Dual wavelength and flicker frequency sensing for false alarm reduction
- 100-degree supervision angle with 17m coverage at full angle
- 360-degree omni-ring LED indication with self-test glass contamination monitoring
-
Apollo Intelligent Switch Monitor
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
- Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Priority mode for fast response
- Configurable input styles
- Earth fault monitoring
-
Apollo XP95 Addressable Open-Area VID
- Available in red, amber, and clear lens with red flash
- Digital communication compatible with XP95, Discovery, and CoreProtocol
- Designed for indoor use with IP23D rating
-
Apollo Marine Isolating Base
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
- High-brightness LED
- Detects wiring short-circuits
- Minimises disruption from short-circuits
-
Apollo MiniDisc Remote Indicator
- Small and discrete remote indicator
- Compatable with with Apollo XP95, AlarmSense or Series 65 detectors
-
Apollo New Style Call Point Keys – Pack of 10
- Apollo New Style Call Point Key
- Pack of 10
- Allow Users to test Call Points for Correct Operation
-
Apollo ORB-BA-10008-APO Series 65 to Orbis Base Adapter
- Enables an existing range to be updated with ease.
- Eliminates the need for re-wiring.
-
Apollo Orbis Conventional Optical Smoke Detector
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Apollo Orbis Conventional Optical Smoke Detector, Non-Latching
- Improved sensitivity to black smoke
- Compensation for build-up of dirt
- Extra confirmation of smoke before an alarm signal is given
-
Apollo Orbis Duct Detector
Key Features
- For use with Series 65 or Orbis detectors.
- Operates in air speeds of 0.5m/s to 20m/s.
- Transparent cover to view detector head LED.
- Integral smoke test port.
- Volt-free contacts.
-
-
Apollo Orbis Timesaver Diode Detector
- Designed for seamless integration with Orbis systems
- Simplifies installation and enhances detector performance
- Ensures reliability and compatibility with various fire alarms
-
Apollo Orbis TimeSaver Sav-Wire Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Is used in 'Sav-Wire' systems
-
Apollo Intelligent Test Set
- Seven-inch LCD touch screen display for intuitive operation
- Compatible with XP95, Discovery and CoreProtocol ranges
- Lithium-ion battery powered with USB connectivity
-
Apollo SC2900-001 Conventional Manual Call Point
- Resettable operating element.
- Easy access, front reset mechanism.
- Ergonomic reset key.
- EN54-11 certified.
- 170° viewable LED.
- Suitable for flush or surface mouting.
- Optional hinged cover.
-
Apollo Series 65 12V DC Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Can be used in fire and security systems
-
Apollo Series 65 Diode Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 End-of-Line Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Series 65 or XP95 Base Cover
- Protects base when the detector is not in place.
- Aesthetically pleasing.
-
Apollo Series 65 Sav-wire Base
- Allows Series 65 conventional detection to work on Sav-Wire panels
- Detector locking mechanism
- Contains an earth connector
- Easy to wire
-
Apollo Series 65 Standard Base
- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 Standard Relay Base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
-
Apollo Weatherproof Multi-Tone Open-Area Sounder Visual Indicator with Isolator (Red)
- Choice of tones on standard device: Apollo, Slow Whoop, and DIN.
- IP66 rated.
- Two Volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
- Individual and group addressing.
- Built in isolator.
-
Apollo XP95 3 Channel Input/Output Unit
- Uses a single address.
- Allows independent monitoring of input channels.
- Allows independent control of output relays.
-
Apollo XP95 Addressable Output Unit
- The Output Unit provides a voltage free single pole, changeover relay output.
- It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.
-
Apollo XP95 Sounder VAD Base
- EN54-23 compliant VAD with built-in isolator
- Two adjustable volume ranges 55–91dB(A)
- Unique acoustic and VAD self-test capability
-
Apollo XP95 Ancillary Base Sounder
- For use on an XP95/Discovery systems.
- Sound output of 85dB(A) at 1 metre.
- Current consumption of only 3mA.
- Loop-powered.
- Responds to signals from the associated detector – does not have an address of its own.
-
Apollo XP95 Blanking Cap For Base Sounders
- Blanking cap for XP95 sounder or combined sounder & flasher bases.
- Suitable for applications where no detector is required.
- Available in either red or white.
-
Apollo XP95 Dual Channel DIN-Rail Isolator
- Two independent isolators in one DIN-rail housing
- Loop-powered with visual LED fault indication
- Supports up to 20 XP95 detectors between isolators
-
Apollo XP95 DIN-Rail Mains Switching Input / Output Unit
- It can report fault, switch open and switch closed levels
- Three visible LEDs
- Capable of switching up to 8A at 250V AC
- Fits a standard 35mm DIN-Rail
-
Apollo XP95 DIN-Rail Sounder Controller (5 Amperes)
- Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
- May be synchronised with loop sounders
- An opto-coupled input is provided to monitor the state of the external power supply
- Features group addressing
- Will accept a load of up to 5A
-
Apollo XP95 High Temperature Heat Detector
- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car-parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 I.S MEDC Manual Call Point
- Robust design
- Waterproof
- Reports an alarm in under 0.2 seconds
-
Apollo XP95 I.S. Manual Call Point
- Intrinsically safe for use in hazardous areas
- IP67 rated for indoor and outdoor applications
- Rapid alarm reporting in less than 0.2 seconds
-
Apollo XP95 I.S. Mounting Base
- Universal XPERT card addressing
- One-way fit design
- Only accepts intrinsically safe detectors
-
Apollo XP95 Input/Output Unit With Isolator
The Apollo XP95 Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.