Heat

• Approved for use in the marine environment
• Five response modes for environmental adaptation
• Day/night switching for increased flexibility
• Drift compensation for false alarm reduction
• User programmability for data
• XPERT card addressing for increased security
• Ideal in environments that are dirty or smoky
• Unaffected by wind or atmospheric pressure
• Remote test feature

• Electronic linear heat detection
• Fixed 60°C and 90°C versions available
• Wide voltage range (9.5 ~ 30 V dc)
• Approved by LPCB
• Approved to MED by GL
• GL Type approval

• Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
• Compatible with most conventional systems
• 8 alarm indication LEDs

The Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.

• Conventional fixed high-temperature heat detector
• Compatible with most conventional systems
• 8 alarm indication LEDs

• Heat Class A1r, A2 & B
• Third-party certified to EN54-5 by Intertek
• Carries the pan-European ‘CertAlarm’ mark

• Designed to meet EN54 requirement
• Lockable to base to stop unauthorised removal
• Remote LED output

• Wide operating voltage range 9V to 33V
• Multiple temperature variants for different applications
• Dual thermistor network with rate of rise detection

• Programmable for three operation modes: A1R, A2, or B
• Onboard short circuit loop isolator for enhanced safety
• Ultra-bright LED indicators for clear alarm visibility

• High-precision thermistor for accurate temperature monitoring
• 10-year sealed battery for long-lasting performance
• Visual and audible alarms to alert users effectively

• Remote LED output
• 8 LEDs for improved, 360° visibility
• Addressed with dip switches or hand-held programmer

• Remote LED output
• 8 LEDs for improved, 360° visibility
• Addressed with dip switches or hand-held programmer

• Electronic linear heat detection
• Twin fire LEDs allow 360° viewing
• Approved by LPCB & VdS

• Electronic linear heat detection
• Incorporates a 90°C fixed temperature element
• Approved by LPCB & VdS

• Replaces EV-H-A1R & EV-H-CS from September 2024
• Choice of A1R or CS heat classes
• Backward compatible with EV-H-A1R & CS
• Evolution FSK protocol

• Class A1 fire detection (54°C to 65°C)
• Built-in replaceable 9V battery back-up
• Hardwire and wireless interconnection up to 24 units

• Rate of rise, fixed at  77°C or fixed at 92°C models available.
• 360° visibility LED using lightpipe technology.
• Aesthetically pleasing.
• Quick and simple to install.

• A high quality programmable heat detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
• Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector
• Onboard short circuit loop isolator

• 62°C or 92°C conventional heat detector from Nittan.
• Omniview 360° LED.
• Internal alarm current limiting resistor.
• Wide operational voltage range (12v-32v).

• Dual detection with fixed temperature and rate of rise elements
• User selectable modes with panel-controlled operation
• LPCB and VdS approved to classes A1, B and C

• Class A1 fire detection from 54°C to 65°C
• Built-in 10-year rechargeable lithium battery back-up
• Hardwire and wireless interconnection up to 24 units

• Electronic linear heat detection
• Twin fire LEDs for 360° viewing
• Wide voltage range of 9.5 to 30 V DC

• Analogue sensing - reduces false and unwanted alarms.
• Addressable - system knows the status and location of every sensor.
• Automatic self test.
• EN54 Part 5 approved and CPD certified.

• Addressable heat sensor.
• Soft addressed.
• Integral short circuit isolator.
• Single address.
• Wide range of sensor types.
• 360° visibility LED using lightpipe technology.
• Drift compensation.
• Aesthetically pleasing.
• Quick and simple to install.
• Single “multi-mode” heat sensor.
• Wide viewing angle for increased LED visibility.
• Common mounting base.
• Positive “lock” indication.
• Discreet design for incorporation into any decor.
• Easy to maintain/service.