Yes

• Improved sensitivity to black smoke
• Compensation for build-up of dirt
• Extra confirmation of smoke before an alarm signal is given

• Improved sensitivity to black smoke
• Compensation for build-up of dirt
• Extra confirmation of smoke before an alarm signal is given

• Wide range of heat detector classes for various conditions
• Rate-of-rise and static temperature detection capabilities
• Open-web casing for improved air flow and temperature measurement

• TimeSaver base provides simple installation
• StartUp flashing LED to confirm devices are wired in the correct polarity
• Continuity link enables voltage testing of zone wiring before commissioning
• DustDefy system prevents dust ingress while maintaining airflow
• Transient rejection uses algorithms to reduce false alarms
• Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
• DirtAlert shows the drift compensation limit has been reached
• Sensalert indicates incorrect detector operation
• FasTest maintenance procedure takes just 4 seconds to complete
• E-Z fit slots allow base to be fixed in position without removing mounting screws
• 360° visibility of LEDs

• Reduces false alarms.
• Sensitive to fast burning, flaming fires.
• Improved sensitivity to black smoke.
• Compensation for slow changes in sensitivity.
• Algorithms for reliability of alarm.

• TimeSaver base provides simple installation
• StartUp flashing LED to confirm devices are wired in the correct polarity
• Continuity link enables voltage testing of zone wiring before commissioning
• Wide angle optics respond well to a wide range of fires
• DustDefy system prevents dust ingress while maintaining airflow
• Transient rejection uses algorithms to reduce false alarms
• Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
• DirtAlert shows the drift compensation limit has been reached
• Sensalert indicates incorrect detector operation
• FasTest maintenance procedure takes just 4 seconds to complete
• E-Z fit slots allow base to be fixed in position without removing mounting screws
• 360° visibility of LEDs

The Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.

• Approved for use in marine environments
• Transient rejection for false alarm reduction
• Modern, low-profile design
• Responds well to fast-burning, flaming fires
• Good performance in both black and white smoke
• DirtAlert, warns service engineers via a flashing yellow LED that detectors need maintenance
• FasTest - a maintenance procedure that takes just four seconds to test detectors
• SensAlert - a yellow flashing LED indicates faulty operation
• High humidity tolerance at up to 90% RH
• Wider operating temperature -40°C to +70°C

• Approved for use in marine environments
• Transient rejection for false alarm reduction
• Modern, low-profile design
• Responds well to slow-burning fires
• Good performance in both black and white smoke
• DirtAlert - warns service engineers via a flashing yellow LED that detectors need maintenance
• FasTest - a maintenance procedure that takes just four seconds to test detectors
• SensAlert - a yellow flashing LED indicates faulty operation
• High humidity tolerance at up to 90% RH
• Wide operating temperature -40°C to +70°C

• Responds well to fast-burning, flaming fires
• Transient rejection algorithms reduce false alarms
• Automatic drift compensation with DirtAlert™