No

Enter a brief description of your product here. This description will be displayed on product list pages.

• Protect the loop against short circuits

The Relay base is mainly used on 12V security systems to signal detector operation to the panel.  They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).

• Range of detection technologies with advanced microprocessor controlled detection
• Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
• Compatible with diode base to monitor detector removal

• Standard base for ES Detector conventional Gent detectors.
• Available with optional diode.

• Optical smoke detector for early detection of fire.
• Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
• Compatible with diode base to monitor detector removal.

• Common for all GST DC series detectors.
• Supports detectors locking to prevent unauthorised removal.
• Easy to install with standard mounting options.

• Combined optical smoke and A2R class heat detector.
• Supports drift compensation to enable good environmental adaptability.
• Self-diagnostic.
• Local test activation with reed switch.
• Chamber contamination checking.
• All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.

• Supports drift compensation to enable good environmental adaptability.
• Self-diagnostic.
• Local test activation with reed switch.
• Chamber contamination checking.
• All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.

• Self-diagnostic.
• Local test activation with reed switch.
• All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
• Configurable polling LED support.
• Remote indicator output.
• 3 Programmable operating levels (A1R, A2S and BS).

• Integral remote indicator output
• Low profile, only 8 mm
• Rugged design and electronics free

• Integral remote indicator output
• In-line Schottky Diode for line continuity
• Low profile, only 8mm

• Sav-Wire detector mounting base
• Available in Ivory or White

• High Intensity LED technology
• Colour-matched to existing Ivory and White detector and base ranges
• Fits standard CDX base (YBN-R/6)

• Features integral SCI
• Compatable with Hochiki ESP sensors
• Available in Ivory or White

• Approved to EN54-3 by UL.
• 96 dB(A) output.
• 6 mA current consumption.
• Low profile and subtle design.

• Very bright VID beacon.
• Ideal for many general signalling applications.
• Can be grid mounted for industrial applications.
• Five different lens colours available.

• Intrinsic safe certified beacon.
• Suitable for zones 0, 1 or 2.
• IP66 rated.

• Conventional sounder from KAC.
• Available with low profile or deep mounting base (IP65).
• 32 tones all approved to EN54-3.

• High output 230V AC siren
• Up to 127 dB
• Available with either 12V trigger
• IP rated for both indoor and outdoor use

• High output
• 16 selectable alarm tones
• Volume control
• Backwards compatible with Zeta Standard Protocol (link)

• High output of 105 or 110dB (depeding upon version)
• Conforms to EN54-23
• White or Red flash versions available
• Synchronised Flash

• Universal mounting base for Nittan Evolution range.
• Optional deeper version for surface cable.

• Includes a shorting link to allow loop continuity testing
• Allows for ease of installation cable testing
• Low profile