Standard
Showing 601–650 of 1874 results
-
C-Tec NC302RXC Master Infrared Ceiling Receiver
- Receives line-of-sight infrared signals from up to 10 meters away, depending on environmental conditions
- Includes a red LED that confirms when a call has been made
- Requires a separate remote reset point, such as a button or keyswitch, to cancel calls
-
C-Tec NC802DB Standard Call Point, Button Reset with Remote Socket
- The call point features a button reset mechanism
- It includes a 6.35mm jack plug socket for remote operation
- The design is suitable for use in 800 Series Call Systems
-
C-Tec NC802DEB-1/2 Emergency Call Point, Button Reset with Remote Socket
- Includes a 6.35mm jack plug socket for connecting optional devices like a tail call lead or pressure mat
- Features a red reassurance LED that confirms when a call has been made
- Provides an onboard reset button to cancel standard and emergency calls made from the NC802DEB-1/2, as well as standard calls from other devices on the same zone
-
C-Tec NC802DEWA IP67 Emergency Sauna/Steam/Wet Room Alarm Point, Requires NC889ERM
- It has a surface-mounted design with a 35mm black back box, yellow call point, and white push button
- It comes supplied with a set of branding stickers
- The IP67 rating ensures it is protected against water ingress and can withstand the harsh conditions found in saunas and steam rooms
-
C-Tec NC802DEWP IP67 Emergency Pool Alarm Point, Requires NC889ERM
- IP67 rated panic alarm point for swimming pools
- Compatible with 800 Series Call System via NC889ERM
- Includes a black back box, blue call point, and white push button
-
C-Tec NC804DE Emergency Only Call Point, Button Reset
- The onboard reset button can cancel emergency calls made from the NC804DE and standard calls made from other devices on the same zone
- It is ideal for use as a reset point for ceiling pull units, allowing a more urgent emergency call to be made if additional assistance is required
- A red reassurance LED confirms when a call has been made
-
C-Tec NC805AS Air Switch for NC805P
- Operates at a minimum differential air pressure of 0.9 p.s.i (6220 Pa) ± 10% at 16°C
- Ideal for use by patients or residents who need to activate a nurse call system
- Connects to the NC805P pneumatic pad via a 6.35mm jack plug
-
C-Tec NC805C/14 4.2m (14ft) Tail Call Lead
- Allows users to remotely generate standard calls from various locations
- Features a pear-shaped call push, 4.2m (14ft) trailing lead, and a 6.35mm remote jack plug
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points
-
C-Tec NC805C/6 1.8m (6ft) Tail Call Lead
- The lead comprises a pear-shaped call push, a 1.8m (6ft) trailing lead, and a 6.35mm remote jack plug for easy connection to compatible call points
- Activating the pear push or removing the tail call lead from a call point's remote socket will generate a standard call, providing users with greater flexibility and accessibility
- The 6.35mm remote socket on compatible Quantec and 800 Series call points allows for seamless integration and easy installation of the tail call lead
-
C-Tec NC805D 1.2-3.6m (4-12ft) Coiled Tail Call Lead
- Allows users to remotely generate standard calls from armchairs, beds, and other locations
- Comprises a pear-shaped call push, coiled 1.2-3.6m trailing lead, and a 6.5mm remote jack plug
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points
-
C-Tec NC805MD Portable Movement Detector
- Portable, robust, and easy to adjust for use in residential care facilities
- Ideal for patients who have difficulty adjusting or suffer from dementia, as it requires no components in the bed itself
- Easily connects to compatible Quantec and 800 Series call points through the 6.35mm remote socket
-
C-Tec NC805P Hand/Foot Operated Pneumatic Pad
- The pneumatic pad operates the highly-sensitive NC805AS air switch, which is sold separately
- The NC805AS air switch, when connected to a compatible call point's remote socket via its 6.35mm remote jack, triggers a standard call
- The C-Tec NC805P is ideal for people who have difficulty pressing buttons on standard call leads
-
C-Tec NC806C Overdoor Light
- Offers visual alerts with a constant red light for standard calls and a pulsing red light for emergency calls, ensuring clear communication of the call type
- Features dual red LEDs and a triangular diffuser for high visibility from a distance, enhancing safety and response times
- Constructed from durable ABS plastic and compatible with standard UK 25mm single gang flush or surface back boxes, making it versatile for installation in different environments
-
C-Tec NC806C Overdoor Light with Sounder
- Visual indication of 800 Series Alarm calls with red lights for Standard and Emergency calls
- Highly visible design with dual red LEDs and a triangular diffuser
- Versatile mounting options on standard UK back boxes
-
C-Tec NC807C Ceiling Pull Unit
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
-
C-Tec NC809DB Button Reset Point
- It mounts on a standard UK 25mm single gang flush or surface back box
- It can be used to remotely cancel standard calls generated from ceiling pulls and/or wall call points that are wired on the same zone
- It is designed for use with C-TEC's 800 Series Call System
-
C-Tec NC809DB/SS Button Reset Point in Stainless Steel
- Compact 87 x 87 x 24 mm design that mounts on a standard UK single gang back box
- Provides audible and visual indication when a call is acknowledged to reassure users
- Can be used as part of an accessible toilet alarm system to cancel calls from inside the WC
-
C-Tec NC809DBBT Accessible Toilet Reset Point with Sounder
- Allows calls from the NC807C ceiling pull unit to be cancelled from inside the toilet
- Provides visual and audible indication to the user that their call has been acknowledged and help is on the way
- Can be mounted on a standard UK single gang back box and is also available as part of the NC951 accessible toilet alarm kit
-
C-Tec NC809DM Magnetic Reset Point
- The NC809DM can be used to remotely cancel standard calls from the 800 Series Call System
- It requires a separately available NC803M magnetic reset key to operate the magnetic reset target
- The device mounts on a standard UK 25mm single gang flush or surface back box
-
C-Tec NC883D 12V Relay Unit
- Can be directly triggered from the call system's signal lines, provided the unit is supplied with +12V and -V power
- Typically used to switch extra low voltages, but can also switch mains voltages when following the guidelines in the instructions
- Incorporates a high-intensity LED that illuminates red when the relay is active, and includes a white "write-on" area for personalizing the unit
-
C-Tec NC888D Remote Sounder
- Connects to multi-zone 800 Series Call Controllers, Master Indicator Panels, or Switchable Sounders
- Indicates Standard calls with a constant tone and Emergency calls with a pulsing tone
- Limit of two remote sounders per hosting device
-
C-Tec NC889ERM Multi-Purpose Call Latch Module
- Includes a red reassurance LED that illuminates when a call is made
- Provides an onboard magnetic reset facility for cancelling calls
- Offers multiple wiring options via the device's colored leads, making it ideal for applying 800 Series call point electronics to custom-made switch assemblies
-
C-Tec NC894DKB Isolatable Monitoring Point, Button Reset
- It can be used to monitor any device with a normally open or normally closed switch
- It has an isolation keyswitch that temporarily turns off the device's monitoring function when in the isolated position
- It triggers a standard call when activated, making it suitable for monitoring fire exits, drug cupboards, store rooms, and other similar applications
-
C-Tec NC899IRR Keyswitch Reset Point
- Momentarily turning the keyswitch to the "ISOLATE" position resets the call
- The keyswitch must be returned to the "ON" position after reset, as leaving it in "ISOLATE" will disable the NC302RXC receiver's emergency call function
- The reset point mounts on a standard UK 25mm single gang flush or surface back box
-
C-Tec NC917L Standard Call Push with Protruding Button, No Reset, No Remote
- The red LED confirms when a call has been made
- It requires a separate reset point to cancel calls
- It mounts on a standard UK 25mm single gang flush or surface back box
-
C-Tec NCP Double Gang Surface Interface Plate
- Adapts to most European fixing centers for flexible installation
- Available in multiple variants, including single gang shallow, single gang deep, double gang shallow, and double gang deep options
- Designed to match C-TEC's existing plastics and colors for a cohesive aesthetic, and can also be surface mounted directly to a wall
-
C-Tec NCP Single Gang Surface Interface Plate
- Adapts to most European fixing centers for flexible installation
- Available in multiple variants, including shallow and deep options, to suit different application needs
- Designed to match C-TEC's existing plastics and colors for a cohesive aesthetic
-
C-Tec NCP-13 Anti-Bacterial Wipe Clean Pull Cord Accessory Pack
- The cord has integral properties that can help prevent the spread of infections such as MRSA, E.coli, C.diff, and Norovirus
- The pack is easy to clean using a cloth and mild detergent
- It is compatible with a wide range of ceiling pull units from various manufacturers
-
C-Tec NCP-27 Adaptable Conduit Box
- Product dimensions (mm): 101 x 38mm (3mm thick). Internal wiring depth: 33mm
- Construction & finish: White PVC. RAL9003 Blue White.
- Weight: 86g
- Notes: Supplied with 2 x K40 x 30mm fixing screws; Flammability rating: UL 94-5VA; Relevant standard: BSEN 60670-1
-
-
C-Tec S-KEY | Red Plastic Fire Panel Key | Fits CFP, XFP & ZFP Panels
- Compatible with CFP, XFP and ZFP fire panel ranges
- Red polycarbonate construction for durability
- Compact lightweight design at just 1 gram
-
C-Tec QT616 Quantec Infrared/Radio Fall Sensor
- Transmits up to 10m line-of-sight and has RF coverage dependent on the Quantec receiving device used
- Includes a Karabiner clip and lanyard for easy attachment
- Can be programmed to generate different call levels and include a unique user ID/name
-
C-Tec Relay on a Plate 24v 5A (single gang)
- A general purpose, double-pole, polarised 24V 5A relay designed for use in 24V fire alarm systems.
- Incorporates a high intensity LED which illuminates red when the relay is active.
- Can be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets, rollershutter doors, etc.
- Can be mounted on 25mm flush or surface mount back boxes.
-
C-Tec Relay Output Card For CFP Fire Panel Range
- Reset, Fault, Aux and Remote Relay
- Output Card for CFP Panels
-
C-Tec SAF0724 CFP Accessory Pack
- Replacement accessory pack for the C-Tec CFP panels
- Suitable for CFP conventional and CFP AlarmSense panels
-
C-Tec Stainless Steel Emergency Assistance Alarm Kit
- High-quality brushed stainless steel construction for enhanced durability and aesthetics
- Complete single zone emergency assistance alarm kit with all necessary components
- Simple pull cord activation system for reliable emergency response
-
C-TEC Surface Mounting No Break Fire Call Point
- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
-
C-TEC Upload/Download Lead for XFP Panels
- Superseded by C-Tec XFP & Quantec USB Programming Lead
- Upload Download Lead for XFP Panels
-
C-Tec XFP Addressable Fire Alarm Panel
- LPCB certified to EN54-2 & 4 for compliance assurance
- Multiple protocol compatibility options (Hochiki ESP or Apollo XP95/Discovery)
- Scalable loop configurations from 1-2 loops and 16-32 zones
-
C-Tec XFP Apollo/Hochiki Programming Tools
- Intuitive and easy-to-use software
- Includes USB memory stick and programming lead
- Free software updates available
-
C-Tec XFP Repeater Panel
Key Features
- 16 Zone requires - 2 x 12V 3.2Ah VRLA connected in series
- 32 Zone requires - 2 x 12V 7Ah VRLA connected in series
-
CableSafe Fire Clips For Trunking (Pack of 100)
- Fire cable clip designed specifically to fix cable within trunking
- Quick and easy fixing with fold over fastening tabs
- Fits 2-core 1.5mm Fire Performance Cable
- Supplied in packs of 100
-
Call Point Key Kit For Fire Alarm Engineers
- Boxed kit of most popular manual call point keys
- Includes a total of 45 keys
-
Carbon Dioxide Fire Extinguisher Sign
Carbon dioxide extinguisher sign to identify your fire extinguisher. All our fire equipment signs are designed to comply with the UKEC legislation.
-
Carbon Dioxide Switch & Indicator
- Wall mounting
- Monitors CO2 over range 0 to 2,000 ppm
- 230Vac Power supply
- 230V 8A rated output relay
- 15 year calibration interval
- Intuitive Light Display
-
Casil FR Flame Retardant 12V SLA Fire Alarm Batteries
- V0 flame retardant claasification
- Stable quality & high reliability
- 5 years design time (at 25 degree C)
-
Hochiki Intrinsically Safe Conventional Call Point
- Supports either a ‘Frangible’ glass element or a ‘Non Frangible’ plastic element
- Rugged design with ATEX classification
- SIL Level 2 approved variant available
-
CCTV Systems Logbook
- Complete log book for CCTV system.
- Logs essential details of your system.
-
Ceasefire 2 Litre Water Mist Extinguisher
- Effective on Class A, F, and electrically started fires
- Generates a fine mist with 40–60-micron molecules
- Eliminates dangers of electrocution and flooding
-
Ceasefire 3 Litre Water Mist Extinguisher
- Effective on Class A, F, and electrically started fires
- Generates a fine mist with 40–60-micron molecules
- Eliminates dangers of electrocution and flooding