Orbis Intrinsically Safe (IS) TimeSaver Base
£8.08 (inc VAT: £9.70)
You may also need
Key features
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
Summary
The Orbis IS TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
View full overview Show less
Installation:
It is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.
Features
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
Additional information
| Weight | 0.06 kg |
|---|---|
| Hazardous Applications | |
| Marine Applications | |
| Relay | |
| Short Circuit Isolator | |
| System Type |
More products from Apollo
Apollo Orbis Conventional Heat Detector
Apollo Orbis Conventional Multisensor Detector
£21.17
Apollo Orbis Conventional Optical Smoke Detector
£15.39
Apollo Orbis Conventional Optical Smoke Detector, Non-Latching
£28.09 (inc VAT: £33.71)
Apollo Orbis Deep TimeSaver Base
£5.85 (inc VAT: £7.02)
Apollo Orbis I.S. Base Adaptor
£22.54 (inc VAT: £27.05)
Apollo Orbis TimeSaver Continuity Switch Base
£3.51 (inc VAT: £4.21)