Shop
Showing 2301–2350 of 3067 results
-
Hochiki ESP Single Input Module
- Single Monitored Input
- Small Design
- Flying Leads for Easy Installation
- Approved by LPCB & VdS
-
Hochiki ESP Single Output Module
- Includes a Single Monitored Output
- Flying Leads for Easy Installation
- Approved by LPCB
-
Hochiki ESP Powered Output Module
- 24V Supply at Various Currents
- User Selectable Output
- Two Monitored Inputs
- Colour Coded Flying leads for easy installation
-
Apollo Intelligent Single or Twin Input/Output Unit with Isolator
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
-
Apollo Intelligent Mains Switching Input/Output Unit
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator*
- Address range 1 - 254
-
Hochiki ESP Device Address Programmer
- Recently been restyled to provide a more rugged yet light enclosure.
- Handheld programming tool for Hochiki ESP devices.
- Lightweight design.
- Battery operated with a capacity of 8,000 operations.
-
Hochiki ESP Sub Box Assembly
- Dobust Design
- Compatible with all CHQ Modules
- Used to Replace Damaged Components
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki FIREscape EL-BAT450 Luminaire Battery
- 450 mAh.
- 7.4V.
- For use with FIREscape luminaires and exit signs.
-
Hochiki Installation Kit for YBN-UA / YBO-UA(WHT) (YYA-A)
- For use with YBN-UA Recess Mounting Adaptor.
-
Hochiki Manual Call Point Key (Pack of 10)
- Comes in Pack of 10 Pcs
- Key for Hochiki Call Points
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki PL-2 Legacy Device Programming Lead Programming Lead (Jack Plug to Croc Clip)
- Allows Hochiki TCH-B200 to program legacy ESP devices.
-
Hochiki PL-3 Additional Programming Lead 3 Way Connection
- For use with Hochiki devices with square connector
- Allows connection of TCH-B200 programmer
-
Hochiki Recess Base Adaptor (required YYA-A)
- Allows base and analogue sensor or conventional detector to be flush mounted.
- Supplied with fixing brackets.
- Colour-matched to existing ivory and white sensor/detector ranges.
- Sturdy construction, easy to install.
- Suitable for a maximum ceiling thickness of 30mm.
-
Hochiki Sav-Wire Manual Call Point
- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SI/CAP2 Base Sounder or Isolator Cover
- Protects wiring terminals on isolator bases and base sounders
- Easy to fit
- Available in Ivory or White
-
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector
- Removable, High Performance chamber
- Wide voltage range (9.5 ~ 30 V dc)
- One master base
- Approved to MED by GL
- Approved by LPCB
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki SR/Y Mounting Box for Hochiki Manual Call Points
- For surface mounting of the HCP call points
- Standard red or Yellow
- 32mm deep
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
HOCP Howler Call Point Site Alarm
Howler Call Point Site Alarm with Key Resettable Call Point Switch Option.
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
Hot Work Kit
- Includes 2kg ABC powder fire extinguisher (approved to BSEN3).
- Includes K40 1.2 x 1.8m high performance fire blanket.
- Plastic pocket for storage of Hot Work Permit forms.
- Rolls up into an easy to carry, easy to store bag ready to take onto site.
-
Howler Call Post
The Howler Call post is a tough, powder-coated backboard that comes with statutory signage, mounting holes and fixings suitable for each type of Howler Alarm.
-
Howler SA01 Site Alert With Strobe
- Standalone site alarm
- LED visual strobe & 100dB @ 1m sounder
- Ability to link 20 units together with a 2 core cable
- Powered from 9V battery (included)
- IP55 rated
- Howler branded (the leading name in site alarm)
- 2 year warranty
-
Howler Site Alert RF Heat Detector
Key Features
- Simple to configure and re-configure using dip switches
- Powered using easily sourced, low cost alkaling batteries
- Disconnection and battery status reflected by the site alert RF master unit
- Radio linked via the master unit to manual call points
- Can link to 31 units
- Radio frequency with 868 Mhz class 1 receiver
- Battery Operated - no mains power required
- Weatherproof design
-
Howler Site Alert RF Wireless Site Alarm
- Wireless Linking - Up to 30 units can be linked – no trailing wires
- Weatherproof - Push on/push off switch operation
- Loud - 100dB at 1 metre.
-
HSE 10, 20 or 50 Person First Aid Kit
- HSE first aid kit.
- Suitable for 10, 20 or 50 people.
- Made form thick walled polypropylene.
- Metal pin hinges, tough black clips & strong handles.
- Suitable for tough environments.
-
Hush ActiV Grade C Stand-Alone Domestic Fire Alarm Kit
- Grade C fire detection
- Monitored for faults
- 72-hour standby battery
-
-
Hydrosense Conventional Water Detection Control Panel
- Multi-zone water leak detection (2, 4, 8 zones available)
- Linear and point detection with Hydrowire and probes
- Battery backup with comprehensive fault monitoring
-
Hydrosense HS Conventional Repeater Panel
- Hydrosense HS repeater panel to show alarm infromation in additional location.
- Available in 2, 4 or 8 zones sizes.
- Optional integral PSU.
-
Hydrosense HS Conventional Water Detection Hydro-Probe
- Point leak detection for Hydrosense HS water detection system.
- Ideal for areas where moisture is permitted.
- Drip tray and floor.
-
Hydrosense HS Conventional Water Detection Hydro-Probe Junction Box
- Interfaces Hydro-Probe with HS panel field wiring.
- 1 Hydro-Probe per junction box.
- Housed in attractive polycarbonate encosure.
-
Hydrosense HS Conventional Water Detection Hydro-Wire
- Consistent leak detection along the total length of cable.
- Available in 5 and 10 metre lengths (other lengths on request).
- Simple connection and termination.
- Aesthetically attractive.
-
Hydrosense HS Hydro-Wire Connection Interface
- Interfaces Hydro-Wire with HS panel field wiring.
- 1 Hydro-Wire length per junction box.
- Housed in attractive polycarbonate encosure.
-
-
Hyfire Economy Single Loop 16 Zone Control Panel
- Economy Hyfire control panel.
- 16 zonal LEDs.
- Available with option keyswitch.
-
Toccare Mini Lite Half Loop Touch Screen Control Panel
- A totally touch screen panel with easy to use interface.
- The panel takes 2 x 12v 7amp batteries
- Compact & convinient enclosure.
- Supports up to 15 repeater panels.
- 4 on-board relays and 2 sounder circuits.
-
Hyfire HFW-W2W-01 Wireless Translator Module
- Hyhire wireless translator module.
- Gateway between Hyfire wireless devices & control panel.
- Loop powered.
- Compatible with up to 7 expander modules.
-
HyFire HFW-EM-01 Wireless Expander Module
- Wireless signal expander for Hyfire system.
- Compatible with dynamic, static and conventional translators.
- IP protection for mounting in challenging environments.
- Capability for 32 wireless field devices per expander.
-
Hyfire HFW-PA-05 Wireless Dual Optical Smoke Detector
- Advanced dual path optical chamber design.
- Internal algorithm processing optimises performance.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Hyfire HFW-TA-05 Wireless Heat Detector
- Hyfire wireless heat detector.
- Multiple sensitivity settings.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.