Quantec Enuresis/General Purpose Interface Socket
£64.76 (inc VAT: £77.71)
Summary
The C-TEC QT637 Enuresis/General Purpose Interface Socket provides a versatile interfacing solution for connecting multiple sensor types to a Quantec addressable call system. Designed specifically for care environments, this interface socket enables the seamless integration of bed wet sensors, floor pressure mats, and bed or chair exit sensors into your nurse call infrastructure.
Featuring two dedicated 6.35mm remote jack sockets, the QT637 offers flexibility in sensor configuration. One socket accommodates the QT635 enuresis/bed wet sensor, whilst the second accepts various exit detection devices including floor pressure mats (QT644), bed exit mats (QT633), or chair exit mats (QT634). The unit connects directly to the Quantec system via the ancillary input on a master call point or QT630 dementia care controller.
Built with safety and compliance at its core, the QT637 incorporates an onboard battery and isolation circuit that ensures full compliance with all relevant UK medical directives. The interface can be programmed to generate different call priorities—standard, help required, or emergency—providing appropriate alert levels based on the specific care situation. Supplied on a double gang plate for floor-level installation, the unit includes practical features such as a battery test button and visual indicators for enuresis activity and low battery status.
Features
- Interfaces bed wet sensors, floor pressure mats and bed/chair exit sensors to Quantec addressable call systems
- Two 6.35mm remote jack sockets for connecting enuresis and exit detection sensors
- Compatible with QT635 bed wet sensor, QT644 floor pressure mat, QT633 bed exit mat and QT634 chair exit mat
- Onboard battery and isolation circuit ensures compliance with all relevant UK medical directives
- Connects via ancillary input on Quantec master call point or QT630 dementia care controller
- Programmable call generation with standard, help required or emergency priority levels using QT423 configurator
- Battery test button for easy maintenance checks
- Visual indicators for enuresis activity (flashing red) and low battery status (flashing amber)
- Double gang plate design suitable for floor level installation
- Mounts on standard 35mm deep back box
- Operates on PP3 battery (not supplied)
FAQ
What sensors can be connected to the QT637 interface socket?
The QT637 features two jack sockets that accommodate various sensors. The first socket is designed for the QT635 enuresis/bed wet sensor, whilst the second accepts floor pressure mats (QT644), bed exit mats (QT633), or chair exit mats (QT634).
How does the QT637 connect to my Quantec call system?
The interface socket connects directly to your Quantec addressable call system via the ancillary input on either a Quantec master call point or a QT630 dementia care controller.
Can I customise the type of call alert generated?
Yes, the QT637 can be programmed using a QT423 configurator at the master call point to generate three different call priorities: standard, help required, or emergency, depending on your care requirements.
Is the QT637 compliant with UK medical regulations?
Absolutely. The unit incorporates an onboard battery and isolation circuit specifically designed to ensure compliance with all relevant UK medical directives.
What do the indicator lights on the unit mean?
The QT637 has two indicator lights. The red enuresis active indicator flashes every four seconds when the bed wet sensor detects moisture. The amber low battery indicator flashes every four seconds when the battery requires replacement.
Where should the QT637 be installed?
The interface socket is supplied on a double gang plate and is typically located at floor level. It requires mounting on a standard 35mm deep back box.
What type of battery does the QT637 require?
The unit requires a standard PP3 9V battery, which is not supplied with the product. The battery test button allows you to verify the enuresis circuitry is functioning correctly.
Specifications
- Alarm current: 20mA
- Max battery size and type: Requires a PP3 battery (not supplied)
- Indicators: Enuresis Active (Flashes red every four seconds when the QT635 Bed Wet Sensor detects moisture); Low Battery (Flashes amber every four seconds when the battery is low)
- Controls: TEST button (Press to confirm the enuresis circuitry is working (Enuresis Active indicator will illuminate red).
- Connections: N-; L+; Fault; Enuresis; Bed Exit – see main instructions for wiring details
- Onboard 6.35mm Remote Jack Socket: Yes (x2). One for a Bed Wet Sensor (QT635) and one for a floor pressure mat (QT644), bed exit mat (QT633) or chair exit mat (QT634).
- Product dimensions (mm): 146 W x 87 H x 33 D mm. Mount on a 35mm deep back box
- Construction & finish: Plastic
- IP Rating: IP20
- Weight: 130g
- Operating conditions/temperature: -5°C to +40°C. Max relative humidity: 95%.
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 1 kg |
|---|---|
| System Type | |
| Device Type |