Hochiki
Showing 51–100 of 100 results
-
Hochiki CHQ-WSB ESP Addressable Wall Sounder Beacon in Red or White
- Loop powered adderssabel Hochiki sounder beacon
- 51 User-Selectable Tones
- Available in Red or White
-
Hochiki Conventional 2 Wire Base In Ivory or White
- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki Conventional Beacon
- High Intensity LED technology
- Colour-matched to existing Ivory and White detector and base ranges
- Fits standard CDX base (YBN-R/6)
-
Hochiki Conventional Sounder Base (Ivory or White)
- Conventional Hochiki sounder base.
- Low current consumption.
- Easy to install.
- Maximum 93 dB(A) @ 1 metre (Tone 1).
- 32 user-selectable tones and 3 user-selectable volumes.
-
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-
Hochiki DCD-AE3M / DCD-CE3M Marine Approved Combined Heat Detector
- Electronic linear heat detection
- Fixed 60°C and 90°C versions available
- Wide voltage range (9.5 ~ 30 V dc)
- Approved by LPCB
- Approved to MED by GL
- GL Type approval
-
Hochiki DIN Mounting Box Small or Large
- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
-
-
-
Ekho Back Box for EK-WL8-TRH/EXP/OUT
- Optional deeper back box for rectangular Ekho modules
- Includes two cable glands for convenient setup<
- Unit colored in ivory with a lens color that emits no light and does not allow tone specification
-
Ekho Back Box for EK-WL8-IN
- Meets EU standards
- Multiple knockout connections
- Includes sticky pads
-
Ekho Wireless Survey Kit
- Comprehensive kit for surveying hybrid wireless installations
- Includes portable translator, wireless smoke sensor, and signal-display keypad
- Robust carry case for easy portability and storage
-
Hochiki ESP Addressable Smoke Vent Manual Call Point in Orange with SCI
- Terminals can accommodate up to a 2.5 mm solid conductor
- Orange casing
- Features an integral SCI
- Approved by LPCB to EN54-11:2001
-
Hochiki ESP Analogue Dual Input Module With DIN Option
- Single Loop Address
- Loop Powered
- DIN Rail Version Available
- Integeral SCI
-
Hochiki ESP Analogue Dual Relay Controller with DIN Rail Option
- Loop Powered
- Single Loop Address
- Auxillary Monitored Input
- DIN Rail Version Available
-
Hochiki ESP Mains Relay Controller With SCI With DIN Rail Option
- Loop Powered
- Single Loop Address
- DIN Rail Option
- Aux Monitored Input
-
Hochiki ESP Analogue Plant Control Module with DIN Rail Option
- Simgle Loop Address
- Loop Powered
- DIN Rail Version Availanle
- Approved by LPCB
-
Hochiki ESP Analogue Single Input Monitor
- Single un-monitored input.
- Non-polarised loop connections.
- Sleep mode for low power consumption.
- Monitor LED (when fitted) - flashes when unit is polled, continuously illuminated in alarm.
-
Hochiki ESP Dual Sounder Controller with SCI with DIN Rail Option
- Single Loop Address
- Two Independant Sounder Circuits
- DIN Rail Version Available
- Auxillary Monitored Input
-
Hochiki ESP Dual Zone Monitor with SCI With DIN Rail Option
- Single Loop Address
- Requires an Aux 24V Supply
- DIN Rail Version Available
- Intrinsically Safe Version Available
-
Hochiki ESP Intrinsically Safe Sounder Interface Module With DIN Rail Option
- Provides Dual Sounder Circuits
- Fault Monitored Input
- Requires 24VDC External Power Supply
- Available in DIN Module
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki ESP Single Zone Monitor with SCI with DIN Option
- Loop Powered
- Single Loop Address
- Remote LED Output
- DIN Rail Version Available
-
Hochiki ESP Single Input Module
- Single Monitored Input
- Small Design
- Flying Leads for Easy Installation
- Approved by LPCB & VdS
-
Hochiki ESP Single Output Module
- Includes a Single Monitored Output
- Flying Leads for Easy Installation
- Approved by LPCB
-
Hochiki ESP Powered Output Module
- 24V Supply at Various Currents
- User Selectable Output
- Two Monitored Inputs
- Colour Coded Flying leads for easy installation
-
Hochiki ESP Device Address Programmer
- Recently been restyled to provide a more rugged yet light enclosure.
- Handheld programming tool for Hochiki ESP devices.
- Lightweight design.
- Battery operated with a capacity of 8,000 operations.
-
Hochiki ESP Sub Box Assembly
- Dobust Design
- Compatible with all CHQ Modules
- Used to Replace Damaged Components
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki FIREscape EL-BAT450 Luminaire Battery
- 450 mAh.
- 7.4V.
- For use with FIREscape luminaires and exit signs.
-
Hochiki Installation Kit for YBN-UA / YBO-UA(WHT) (YYA-A)
- For use with YBN-UA Recess Mounting Adaptor.
-
Hochiki Manual Call Point Key (Pack of 10)
- Comes in Pack of 10 Pcs
- Key for Hochiki Call Points
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki PL-2 Legacy Device Programming Lead Programming Lead (Jack Plug to Croc Clip)
- Allows Hochiki TCH-B200 to program legacy ESP devices.
-
Hochiki PL-3 Additional Programming Lead 3 Way Connection
- For use with Hochiki devices with square connector
- Allows connection of TCH-B200 programmer
-
Hochiki Recess Base Adaptor (required YYA-A)
- Allows base and analogue sensor or conventional detector to be flush mounted.
- Supplied with fixing brackets.
- Colour-matched to existing ivory and white sensor/detector ranges.
- Sturdy construction, easy to install.
- Suitable for a maximum ceiling thickness of 30mm.
-
Hochiki Sav-Wire Manual Call Point
- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SI/CAP2 Base Sounder or Isolator Cover
- Protects wiring terminals on isolator bases and base sounders
- Easy to fit
- Available in Ivory or White
-
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector
- Removable, High Performance chamber
- Wide voltage range (9.5 ~ 30 V dc)
- One master base
- Approved to MED by GL
- Approved by LPCB
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki SR/Y Mounting Box for Hochiki Manual Call Points
- For surface mounting of the HCP call points
- Standard red or Yellow
- 32mm deep
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
MBB-2 Hochiki Mounting Back Box with Glands (Ivory or White)
- 4 cable entry holes suitable for cable glands (2 glands supplied).
- Colour matched to ivory or white detector range.
- Approved Sensor and Base range.
- Provides moisture and dust resistant fixing.
- Ideal for bulk-head fixing.
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
-
YBO-R/SCI Hochiki ESP Short Circuit Sounder Mounting Base in Red or White
- Features short circuit isolator
- Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
- Available in Red or White