Zeta Alarms

• Compatible with all MKII range of detectors
• 3 different types of base available

• Indoor call point compatible with Zeta addressable panels
• Supplied with backbox for surface mount installations (optional flush mount bezel available)
• Very high visibility of the alarm condition

• Sandwich design between base and detector
• 16 selectable international alarm tones
• Individual or group triggering capability

• Indoor MKII addressable sounder compatible with Zeta control panels
• 102dB @ 1m sound output
• Available in Red or White

• Combined sounder and VAD in single unit
• 100dB sound output at 1 metre
• Hard or soft addressable capability

• IP65 weatherproof sounder
• 16 Tone patterns (site selectable)
• Available in red or white

• IP65 weatherproof sounder/beacon
• Flashing rate 0.33Hz - 1.5Hz
• Available in red or white

• Replacement controls enabled keyswitch.
• Compatible with Simplicity, Quatro & Premier SX panels.
• Supplied with pair of keys.

• Complies with EN54 Pt 3 Type B & EN54 Pt 23.
• 107dB +/- 3dB @ 1m sound output.
• 22 Tone patterns (site selectable).
• Suitable for surface mounting only.
• Housed in UL V0 flame retardant ABS.
• 3 x 20mm cable entries (2 top, 1 bottom).
• First fix, wire to back box technology.
• IP65 Rating.
• Flashing rate 0.5Hz

• Complies with EN54 Part 3 Type B.
• 107dB +/- 3dB @ 1m sound output.
• 22 Tone patterns (site selectable).
• Suitable for surface mounting only.
• Housed in UL V0 flame retardant ABS.
• 3 x 20mm cable entries (2 top, 1 bottom).
• First fix, wire to back box technology.
• IP65 Rating.

• Complete disabled toilet alarm system for 1, 2, 3 or 4 toilets/areas
• 4 zone controller supplied with all versions allowing for future expansion
• Controller can be powered by either 12V DC or 240V AC

• Designed to meet the requirements of BS8300
• 1-4 zone capability (1 zone per disabled toilet)
• Simple 3 wire operation for all field devices
• Zone LED indication
• System silence & reset options

• Designed to meet the requirements of BS8300
• Ceiling mounted pull cord used to generate an alarm activation
• 2.4m cord length

• Designed to meet the requirements of BS8300
• Wall mounted device which during an alarm activation will give an visual & audible
  alert
• Can be installed on other toilet alarm systems

• Designed to meet the requirements of BS8300
• Wall mounted push button which is pressed to cancel an alarm activation
• Can be installed on other toilet alarm systems

Spare Disabled Toilet Alarm Pull Cord & Handles

Disabled Toiler Sticker

• Compliant mains safety isolator keyswitch for fire alarm systems.
• Meets the reuirements of BS 5839 Pt.1 2013.
• Double pole isolation (both live & neutral supply is switched).

• BS5839 part 9 (2011) compliant
• Integral 24Vdc power supply 2 Amp
• LCD Display
• 7 status LEDs
• Fault & alarm relay output

Enter a brief description of your product here. This description will be displayed on product list pages.

Enter a brief description of your product here. This description will be displayed on product list pages.

• Safely isolate mains supply
• Ensures mains supply is only isolated by authorised persons with key
• Meets BS 5839 Part1 2002
• Available in Red or White

• Bezel to flush mount Zeta CP3 call point
• Compatable with ZT-CP3. ZT-CP3/AD or ID2-MCP

• Rate of rise and fixed heat detection at 57°C
• Twin LEDs for enhanced alarm indication
• DIFT approved, EN54 parts 5 & 7 compliant