Fire Alarm Detectors
Showing 433–456 of 577 results
-
Firebeam SHORT-RM Short Range Mask for up to 20 Metres
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Firebeam Single Reflector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Firebeam Unistrut Adaptor Plate
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Firebeam Xtra Replacement Controller
Enter a brief description of your product here. This description will be displayed on product list pages.
-
FireRay 2000 – End to End Infrared Optical Beam Smoke Detector
Key Features
- Separate transmitter and receiver units
- Coverage 10 - 100m
- Adjustable sensitivity levels
- Ground level control unit
- Automatic self check drift compensation: The system monitors long term degradation due to build up of dirt on the optical surfaces
- Small unobtrusive transmitter and receiver heads
- Complies with BS5839 part 5
- World-wide approvals including VdS and UL
-
-
Fireray 3000 End to End Infrared Optical Beam Smoke Detector
- Allows for 2 detectors per system controller.
- Range 5 to 120 metres, configurable per set of detectors.
- Integral laser alignment in receiver.
- 2-wire interface between controller and receiver.
- Separate fire and fault relays per detector.
-
-
Fireray 3000 Exd Flameproof Optical Beam Smoke Detector
- Separate transmitter and receiver unit certified to Exd.
- Allows for 2 detectors per system controller.
- Range 10 to 80 meters, (33ft to 262ft) configurable per set of detectors.
- Integral laser alignment in receiver.
-
-
Fireray Commissioning And Maintenance Kit For Beam Detectors
- Commissioning & maintenance kit for all Fireray beam detectors.
- Includes cleaning cloth.
-
Fireray Detector Adjustment Bracket
- Adjustment bracket for use with Fireray One, End-to-End, Fireray 5000 and Fireray 3000.
- Provides 360° rotation plus up to 180° adjustment.
-
Fireray One Auto-Aligning Beam Detector
- Integrated visible laser and auto-alignment for ultimate ease of alignment.
- Integrated user interface.
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources.
- Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
- Contamination Compensation to correct for gradual build-up of dust on optics.
- Clean detectors quickly and easily without affecting alignment.
- Low power consumption; can be powered from the loop.
- Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations.
- Detection range of up to 120m.
-
Fireray Reflector Long Range Ceiling Mount
- Long range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
- For use with four reflectors.
-
Fireray Reflector Short Range Ceiling Mount
- Short range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
-
Four Prism Plate For Use With FFE Universal or Adjustment Bracket
- Four prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
Fyreye Common Base
The Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.
-
Fyreye Deep Common Base
Deep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.
-
Fyreye Diode Base
The Fyreye diode base is used on systems that do need line integrity on head removal. This would include all conventional systems that mix detectors & call points on the same line.
-
Fyreye MKII 12V Auto Reset Relay Base
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Addressable Detector Base – Black
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Diode Base
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Diode Base in Black
- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Isolator Base
Enter a brief description of your product here. This description will be displayed on product list pages.