Fire Alarm Detectors
Showing 505–528 of 577 results
-
Orbis Intrinsically Safe (IS) Multisensor Detector
- Reduces false alarms.
- Sensitive to fast burning, flaming fires.
- Improved sensitivity to black smoke.
- Compensation for slow changes in sensitivity.
- Algorithms for reliability of alarm.
-
Orbis Intrinsically Safe (IS) Optical Smoke Detector with Optional Flashing LED
- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- Wide angle optics respond well to a wide range of fires
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state -
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
Prism For Fireray Reflective Infrared Beam Detectors
- Replacement single reflective prism for use with the Fiureray range of reflective beam detectors from FFE.
-
Prism Heater For Fireray Reflective Prisms in White or Black
- Ultra slim heating pad.
- Designed to prevent the build-up of condensation.
- For use in temperature controlled storage areas and cold environments.
-
Protective Cage for Fireray One
- Protective cage for the Fireray One beam detector.
- Suitable for use with either 1260-000 back box or to a flat surface.
-
Reflective Detector Ceiling Mount for Fireray One or Fireray 5000
- Ceiling mounting bracket for FFE reflective detector heads.
- Suitable for Fireray One or Fireray 5000.
-
Reflector Adjustment Bracket for 1 or 4 Prisms
- Prism plate and adjustment bracket for 1 or 4 prisms.
-
Reflector Wall Bracket for Fireray Prisms in White or Black
- Surface mount plate for Fireray prisms.
- Hole pattern suitable for either 1 or 4 prisms.
- Available in white or black.
-
Replacement Dust Filter for Kidde Stratos Nano, Stratos Micra 10, 25 & 100
- Compatible with Nano, Micra 10, Micra 25 and Micra 100.
- Compatible with Senator Nano, 10, 25 and 100.
- Compatible with LaserSense Nano, 10, 25 and 100.
-
Sampling Chamber For VESDA-E VEP & VEU Aspiration Detectors
- Replacement sampling chamber for VESDA-E aspiration detectors.
- Compatible with the VEP and VEU ASDs.
-
Series 65 Conventional Duct Smoke Detector
- For use with Series 65 or Orbis detectors
- Operates in air speeds of 0.5m/s to 20m/s
- Transparent cover to view detector head LED
- Integral smoke test port
- Volt-free contacts
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
System Sensor Addressable Mounting Base with Isolator
- Low profile (26mm)
- Low Current consumption (100 µA)
- Up to 99 isolators per loop
-
System Sensor B501AP Addressable Mounting Base
- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
The Blazer: Automatic Aspirating Maintenance System
- Reduces filter replacement
- Reduces the wear and tear of the ASD
- Stops the transport and lifting of vacuums and compressors
- Reduces call outs caused by flow faults
- Lowers the overall cost to maintain
-
Universal Ceiling Mount for Fireray 5000, 3000, Prism or Universal Bracket
- Universal ceiling mount for the Fireray 5000, Fireray 3000, Fireray prism or Fireray universal bracket.
- Supplied with 2 x mounting plates and 1 x blank cover plate.
-
Vesda 855 In-line Filter Element, Sold in packs of 4
- Suitable for all Xtralis Aspirating Smoke Detectors.
- Improved detector longevity in applications with high levels of air-borne contamination.
- Reduces maintenance intervals, thus reducing total cost of ownership.
- Requires no additional pipe fi ttings thus reducing cost of installation.
- Improved aesthetics.
- Vertical or horizontal mounting.
- Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors.
-
VESDA High Level Interface HLI
- Direct access and monitoring of VESDAnet system
- Seamless data transfer from your VESDAnet to your PC
- Easily configured using Xtralis configuring and monitoring software packages
- Designed for small or large networks
- VHX-0210 includes modem support for remote notification & interrogation
-
VESDA LCD Programmer
- User friendly menu system
- Supports multiple languages
- Single point access to entire VESDAnet system
- Alarm and fault simulation
- Shows wiring order
- Locates communications failures
- Password security
- Hand held or remote mounting
- Automatic Logoff when inactive
- Backlit LCD screen