Apollo XP95 Blanking Cap For Base Sounders
- Blanking cap for XP95 sounder or combined sounder & flasher bases.
- Suitable for applications where no detector is required.
- Available in either red or white.
Filters
Apollo XP95 Loop Powered VAD, White Body, White Flash, Ceiling Category
- Uses high intensity LED.
- EN 54-23 Compliant Category C VAD.
- Flash rate 0.5Hz.
- Fault signal if LED check failed.
Device Type VAD
Protocol XP95/Discovery/Core
System Type Addressable
Apollo XP95 Loop-Powered Visual Indicator Base with Isolator
- Visual indicator flash rate of once per second
- Synchronisation of visual indicator flash
- Individual and group addressing
- Unique visual indicator self-test
- Loop-powered
- Built-in Isolator
Device Type VID
Protocol XP95
System Type Addressable
Apollo XP95 Multi-tone Open Area Indoor Sounder
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of ‘alert’ and ‘evacuate’ tones.
- Individual & group addressing.
- Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.
Device Type Sounder
Protocol XP95/Discovery
System Type Addressable
Apollo XP95 Open-Area Sounder & Beacon, Red Body, Red Lens
- Choice of tones on standard device: Apollo, Slow Whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
Device Type Sounder/VID
Protocol XP95
Environment Indoor
Apollo XP95 VAD Base with Isolator
Key Features
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
Device Type VAD
Protocol XP95
System Type Addressable
Askari Flange Sounder in Red or White
- Easily fitted within or on control cabinets.
- Easily fitted to most surfaces.
- Can be used in exposed locations.
Device Type Sounder
System Type Conventional
Environment Indoor
Banshee Excel BS Conventional Base Sounder
- Slimmest profile in the industry
- Low current consumption
- Available in white or ivory to match to detectors
Device Type Sounder
System Type Conventional
Environment Indoor, Outdoor
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
Device Type VID
System Type Conventional
Environment Indoor, Outdoor
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
Device Type Sounder/VID
System Type Conventional
Environment Indoor, Outdoor
Fyreye MKII Sandwich Sounder & Flasher Base
- Sandwich design between base and detector
- 16 selectable international alarm tones
- Individual or group triggering capability
Device Type Sounder, VID
Protocol Zeta MKII
System Type Addressable
Xtratone MKII Addressable Sounder
- Indoor MKII addressable sounder compatible with Zeta control panels
- 102dB @ 1m sound output
- Available in Red or White
Device Type Sounder
Protocol Zeta MKII
System Infinity ID2
Xtratone MKII Addressable Sounder & Wall VAD
- Combined sounder and VAD in single unit
- 100dB sound output at 1 metre
- Hard or soft addressable capability
Device Type Sounder, VAD
Protocol Zeta MKII
System Infinity ID2
Raptor MKII Addressable Weatherproof Sounder
- IP65 weatherproof sounder
- 16 Tone patterns (site selectable)
- Available in red or white
Device Type Sounder
Protocol Zeta MKII
System Infinity ID2
Raptor MKII Addressable Weatherproof Sounder & Beacon
- IP65 weatherproof sounder/beacon
- Flashing rate 0.33Hz - 1.5Hz
- Available in red or white
Device Type Sounder, VAD
Protocol Zeta MKII
System Infinity ID2
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
Device Type Sounder, VAD
System Type Conventional
Environment Indoor
Complete the setup
Hand-picked accessories for this item
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
Device Type Sounder
Protocol XP95
System Type Addressable
C-Tec Hi-Output XP95 Wall Sounder
Key Features
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current./li>
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP21C (Type A) rated.
Device Type Sounder
Protocol XP95
System Type Addressable
ClamBell EN54-3 Approved Fire Alarm Bell
- Permanently fitted gong.
- Specifically designed weatherproof back box.
- Slick and modern looking.
- Fully customised pad printed branding.
- Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.
Device Type Bell
System Type Conventional
Environment Indoor, Outdoor
Conventional Raptor Sounder Beacon White Flasher
- Complies with EN54 Pt 3 Type B & EN54 Pt 23.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
- Flashing rate 0.5Hz
Device Type Sounder, VAD
System Type Conventional
Environment Outdoor
Conventional Raptor Weatherproof Sounder
- Complies with EN54 Part 3 Type B.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
Device Type Sounder
System Type Conventional
Environment Outdoor
Conventional Symphoni LX Wall Sounder Beacons
- Ultra low current consumption.
- Up to 7.5m coverage volume (switchable to 2.5m).
- Coverage switch to 2.5m.
- Available as weatherproof (IP66) version.
Device Type Sounder, VAD
System Type Conventional
Environment Indoor, Outdoor
Cooper Intelligent Addressable Sounder Base
- Integral short circuit isolator
- Integral sensor mounting base
- Can be used with a sensor as a sounder base or stand-alone as a sounder
- Cover plate (optional)
- Quick and simple to install
- Integral short circuit isolator
- First fix base
- Selectable tones controlled by the panel
- Adjustable volume controlled by the panel
- Single point connection for sensor and sounder (saving on both time and installation costs)
- Can be used with a sensor or stand alone
- Easy to maintain/service
Device Type Sounder
Protocol Protocol 800
System Type Addressable