Wired Fire Alarm Systems

Showing 49–72 of 237 results

Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
Zeta Alarms
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
Select options This product has multiple variants. The options may be chosen on the product page
Infinity ID2 2-8 Zone Fire Alarm Panel
Zeta Alarms
- Ability to wire in Radial or Loop modes (selectable on panel)
- Panel shows exact device in fire, "Bedroom 1", "Main Office", etc.
- Verify alarms to reduce false alarms
Select options This product has multiple variants. The options may be chosen on the product page
Nittan Evolution 1 Single Loop Fire Alarm Control Panel
Nittan
- 4.3 inch touch screen
- Network card built in for networking up to 16 panels
- Up to 254 devices on the loop
Low Stock
£454.55 (inc VAT: £545.46)
SKU: evolution1
Add to basket
Fike CIE-A-400 1 or 2 Loop Addressable Panel
Fike
- 1 loop panel expandable to 2 loops
- Supports up to 400 devices
- 32 supported zones
Low Stock
£459.26 (inc VAT: £551.11)
SKU: 540-0001
Add to basket
Fyreye MKII Conventional Fixed Heat Detector
Zeta Alarms
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
Select options This product has multiple variants. The options may be chosen on the product page
Haes 2 or 4 Zone AlarmSense Fire Panel
Haes
- 2 or 4 AlarmSense zones
- Cable & labour saving Two-Wire technology
- Approved to EN54-2 & 4
Select options This product has multiple variants. The options may be chosen on the product page
Fike CIE-A-400 Loop Card
Fike
- Converts a 1 loop panel to a 2 loop panel
- Increases device capacity by 200
- Automatic loop detection on power-up
In Stock
£157.45 (inc VAT: £188.94)
SKU: 540-0003
Add to basket
Haes 4-12 Zone AlarmSense Plus Fire Panel
Haes
- 4-12 AlarmSense zones
- Cable & labour saving Two-Wire technology
- Plus panel with larger enclosure, battery capacity & power supply
Select options This product has multiple variants. The options may be chosen on the product page
Fike Twinflex Pro2 Repeater Panel
Fike
- Compatible with the 4 or 8 zone Twinflex Pro² panels only
- Reports Twinflex Pro panel events to a remote location
- Capable of performing system controls (i.e. Silence Alarms, Reset, Sound Alarms & Silence Buzzer)
In Stock
£172.25 (inc VAT: £206.70)
SKU: 505-0010
Add to basket
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
Zeta Alarms
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
Select options This product has multiple variants. The options may be chosen on the product page
ZFP CAST 1-4 Loop Panel
C-Tec
- Feature-rich touchscreen-controlled addressable fire panel
- 1, 2 or 4 CAST compatible loops
- Rapid loop learn, flexible cause & effects and powerful system diagnostics
Select options This product has multiple variants. The options may be chosen on the product page
Apollo Series 65 Conventional Heat Detector
Apollo
- Wide operating voltage range 9V to 33V
- Multiple temperature variants for different applications
- Dual thermistor network with rate of rise detection
Select options This product has multiple variants. The options may be chosen on the product page
Infinity ID2 Repeater Panel
Zeta Alarms
- Can be programmed to act as fully functional (ability to silence/reset) or passive (shows alarm info only)
- 4 cores required from ID2 panel (2 data + 2 power)
- Can powered from 24V auxiliary PSU in the ID2 panel
In Stock
£247.62 (inc VAT: £297.14)
SKU: ID2/REP
Add to basket
ZFP CAST Compact Controller
C-Tec
- Compact design for stylish installation
- Full Access Level 2 functionality
- Supports up to 64 network nodes
Select options This product has multiple variants. The options may be chosen on the product page
AlarmSense AlarmSense Heat Detector
Apollo
- Can be used for applications where smoke detectors are unsuitable
- Two types available; fixed heat (CS) or rate-of-rise (A1R)
Select options This product has multiple variants. The options may be chosen on the product page
CAST-PRO Heat Detector
C-Tec
- Programmable for three operation modes: A1R, A2, or B
- Onboard short circuit loop isolator for enhanced safety
- Ultra-bright LED indicators for clear alarm visibility
In Stock
£21.48 (inc VAT: £25.78)
SKU: CP402
Add to basket
AlarmSense Optical Smoke Detector
Apollo
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
Select options This product has multiple variants. The options may be chosen on the product page
Fyreye MKII Addressable Rate of Rise Heat Detector
Zeta Alarms
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
Select options This product has multiple variants. The options may be chosen on the product page
Fyreye MKII Conventional Optical Smoke Detector
Zeta Alarms
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
Select options This product has multiple variants. The options may be chosen on the product page
Eaton BiWire Ultra 5 in 1 Detector
Eaton
- DIL-Switch Mode Selection
- Non-Latching Mode for HMO Use
- 15m Optical Range
- 2 Core Wiring
Low Stock
£15.79 (inc VAT: £18.95)
SKU: EFBW5IN1DET
Add to basket
Fyreye MKII Addressable Optical Smoke Detector
Zeta Alarms
- 8 LEDs for improved, 360° visibility
- Remote LED output
- Addressed with dip switches or hand-held programmer
Select options This product has multiple variants. The options may be chosen on the product page
Nittan EVC-P Evolution Conventional Optical Detector
Nittan
- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
Low Stock
£13.33 (inc VAT: £16.00)
SKU: EVC-P
Add to basket
Apollo 55000-317 | Series 65 Optical Smoke Detector | Conventional
Apollo
- Photo-electric detection for smouldering fires
- Two-wire polarity insensitive supply
- Operating range -20°C to +60°C
In Stock
£13.66 (inc VAT: £16.39)
SKU: 55000-317
Add to basket
Fyreye MKII Addressable Fixed Heat Detector
Zeta Alarms
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
Select options This product has multiple variants. The options may be chosen on the product page

Selection of the most popular hardwired fire alarm systems.
Organised to ensure all compatible panels & field devices are grouped together.

The following is a selection of the most popular hardwired fire alarm systems we supply. We have conveniently organised these into categories to ensure all compatible panels & field devices are grouped together.

We also supply a comprehensive range of wireless fire alarm systems alongside products from most major fire alarm manufacturers.

Types of fire alarm system

Broadly speaking there are 3 types of fire alarm system namely; conventional, twin-wire and addressable. Each type can form a compliant system however there are key difference in how they are installed (both in term of wiring and programming) and how they function (both in terms of alarm indication and programming features). The following table highlights a comparison between these types of system.

	Conventional Fire Alarms Systems	2 Wire Fire Alarm Systems	Addressable Fire Alarm Systems
Standards	Fully complies with all relevant BS and EN standards.	Fully complies with all relevant BS and EN standards.	Fully complies with all relevant BS and EN standards.
Panel Sizes	Fire alarm panel available in 1, 2, 4, 6 or 8 zones.	Fire alarm panel available in 2, 4 or 8 zones.	Fire alarm panel available in 4 zones.
Wiring	Detectors and call points are connected on a pair of wires for each zone, warning devices (sounders & flashers) for all zones are connected on a separate pair of wires.	All devices (detectors, call points, sounders and flashers) are connected on the same pair of wires for each zone.	All devices (detectors, call points, sounders and flashers) are connected on a single pair of wires for all zones, this is typically wired in a complete loop returning to the panel (similar to an electrical ring main).
Alarm Identification	During an alarm the panel will identify the zone containing the detector which was triggered.	During an alarm the panel will identify the zone containing the detector which was triggered.	During an alarm the panel will identify the exact detector which was triggered (a 20 character label can also be specified for each device, for instance ‘Bedroom A’ which will be shown during an alarm).
Special Features			Alarm and fault history, cable break and short circuit protection and system monitoring.

Need help choosing a fire alarm system?

Call our experienced team on 01792 983 170 or email us via [email protected].

Shopping Basket

0 Items

Subtotal £0.00

Shop by Category

Wired Fire Alarm Systems

Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector

Infinity ID2 2-8 Zone Fire Alarm Panel

Nittan Evolution 1 Single Loop Fire Alarm Control Panel

Fike CIE-A-400 1 or 2 Loop Addressable Panel

Fyreye MKII Conventional Fixed Heat Detector

Haes 2 or 4 Zone AlarmSense Fire Panel

Fike CIE-A-400 Loop Card

Haes 4-12 Zone AlarmSense Plus Fire Panel

Fike Twinflex Pro2 Repeater Panel

Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector

ZFP CAST 1-4 Loop Panel

Apollo Series 65 Conventional Heat Detector

Infinity ID2 Repeater Panel

ZFP CAST Compact Controller

AlarmSense AlarmSense Heat Detector

CAST-PRO Heat Detector

AlarmSense Optical Smoke Detector

Fyreye MKII Addressable Rate of Rise Heat Detector

Fyreye MKII Conventional Optical Smoke Detector

Eaton BiWire Ultra 5 in 1 Detector

Fyreye MKII Addressable Optical Smoke Detector

Nittan EVC-P Evolution Conventional Optical Detector

Apollo 55000-317 | Series 65 Optical Smoke Detector | Conventional

Fyreye MKII Addressable Fixed Heat Detector

Types of fire alarm system

Need help choosing a fire alarm system?