Wired Fire Alarm Systems
Showing 51–100 of 231 results
-

Fyreye MKII Addressable Fixed Heat Detector
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
Select options This product has multiple variants. The options may be chosen on the product page -

Infinity ID2 Detector With Optional Integral Sounder
- 4 types of detector available
- All available with optional integral sounder
- Remote LED output
Select options This product has multiple variants. The options may be chosen on the product page -

CAST-PRO Smoke Detector
- Advanced algorithms for reduced false alarms
- Two detection modes for customisable sensitivity
- Onboard short circuit loop isolator for enhanced safety
-

Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS
£14.09 Select options This product has multiple variants. The options may be chosen on the product page -

Twinflex ASD Multi-Function Detector With Optional Sounder And Strobe
- Available as detector only, with sounder or with sounder/strobe
- 6 selectable modes of detection
- Inbuilt selectable end of line
Select options This product has multiple variants. The options may be chosen on the product page -

Fike Multipoint ASD Head Removal Tool
- Head removal tool for the Twinflex ASD and Sita ASD addressable detectors
- Compatible with Solo extension poles
-

Hochiki CDX Conventional Combined 90 Degree Heat Detector
- Electronic linear heat detection
- Incorporates a 90°C fixed temperature element
- Approved by LPCB & VdS
£14.09 Select options This product has multiple variants. The options may be chosen on the product page -

Nittan Evolution H2 Addressable Heat Detector
- Replaces EV-H-A1R & EV-H-CS from September 2024
- Choice of A1R or CS heat classes
- Backward compatible with EV-H-A1R & CS
- Evolution FSK protocol
£23.03 Select options This product has multiple variants. The options may be chosen on the product page -

Apollo Alarmsense Integrating Optical Smoke Detector
- Responds Well to Slow Burining Smouldering Fires
- 360 Degree Visibility of LED's
- Reduces False Alarms
- Quick Simple Installation
Select options This product has multiple variants. The options may be chosen on the product page -

Eaton Conventional Heat Detector
- Rate of rise, fixed at  77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
Select options This product has multiple variants. The options may be chosen on the product page -

Nittan Evolution PY Addressable Optical Smoke Detector
- Replaces EV-P from September 2024
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
-

Black Infinity ID2 Detector With Optional Integral Sounder
- Black plastic moulding to meet aesthetical requirements
- All available with optional integral sounder
- 4 types of detector available
Select options This product has multiple variants. The options may be chosen on the product page -

CAST Heat Detector
- A high quality programmable heat detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector
- Onboard short circuit loop isolator
-

Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
Select options This product has multiple variants. The options may be chosen on the product page -

Hochiki ESP Addressable Smoke Detector
- High performance photoelectric chamber eliminates ionisation sensors
- Removable chamber design for easy cleaning and maintenance
- Twin LEDs with 360° visibility in three colour options
Select options This product has multiple variants. The options may be chosen on the product page -

Nittan Evolution Conventional Heat Detector
- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
£15.15 Select options This product has multiple variants. The options may be chosen on the product page -

Twinflex ASD Detector with Optional Sounder in Black
- Twinflex ASD detector in black plastic moulding
- Available as detector only or with integral sounder
- 6 selectable modes of detection
Select options This product has multiple variants. The options may be chosen on the product page -

AlarmSense Base
- Standard AlarmSense base
- Detects the removal of a detector head and reports a fault
-

Eaton Conventional Enhanced Optical Smoke Detector
- EN54-7 certified optical smoke detection
- Conventional non-addressable system compatibility
- IP40 environmental protection rating
-

Hochiki ESP Addressable Heat Detector
- Dual detection with fixed temperature and rate of rise elements
- User selectable modes with panel-controlled operation
- LPCB and VdS approved to classes A1, B and C
Select options This product has multiple variants. The options may be chosen on the product page -

CAST Optical Smoke Detector
- A high-quality smoke detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Smart algorithms help reduce false alarms
- Onboard short circuit loop isolator
Select options This product has multiple variants. The options may be chosen on the product page -

Eaton BiWire Ultra Manual Call Point
- Robust Construction
- Fast Fit Clip on Front Cover
- IP22 and IP66 Options
- Compatible with BiWire Accessories
Select options This product has multiple variants. The options may be chosen on the product page -

Hochiki CDX Conventional Fixed 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs for 360° viewing
- Wide voltage range of 9.5 to 30 V DC
£19.56 Select options This product has multiple variants. The options may be chosen on the product page -

Apollo AlarmSense Manual Call Point
- Resettable operating element.
- Easy access, front reset mechanism.
- Suitable for semi-flush or surface mounting.
-

Apollo XP95 Optical Smoke Detector
- Photo-electric light scatter detection principle
- Compatible with XP95, Discovery and CoreProtocol systems
- Unaffected by wind or atmospheric pressure
Select options This product has multiple variants. The options may be chosen on the product page -

Eaton FXN922 Selectable Multi-Mode Conventional Detector
- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-

Apollo XP95 Heat Detector
- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
-

Fike Twinflex Manual Call Point
- Resettable front element
- Indoor and outdoor versions available
- Inbuilt selectable end of line
Select options This product has multiple variants. The options may be chosen on the product page -

Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-

Infinity ID2 Manual Call Point
- Manual call point for the Infinity ID2 system
- Indoor or outdoor (IP67) version available
- Visible warning flag confirms activation
-

Nittan EVC-DP Evolution Conventional Dual Optical Detector
- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-

Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector
- Replaces EV-PHÂ from September 2024
- Orange optic LED and PY type Chamber
- 3 sensitivity settings
- Heat category A1R
-

AlarmSense Sounder Base
- Compatable with complete range of AlarmSense detectors
- High and low volume ranges
-

Apollo XP95 High Temperature Heat Detector
- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car-parks
- Unaffected by wind or atmospheric pressure
-

Kidde Commercial Conventional Heat Detector
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility with a 360° viewing angle
- Three programmable operating levels for versatile applications
-

Eaton BiWire Ultra Base Sounder with Optional VAD Flasher
- Available with Optional VAD Flahser
- Certified to EN54-3 & EN54-23
- Can be Used Stand Alone
- For Use with 5-1 muli-sensor Detector
Select options This product has multiple variants. The options may be chosen on the product page -

Hochiki ESP Addressable Multi-Sensor Detector
- User selectable modes
- Incorporates optical & heat elements
- Removable, high performance chamber
Select options This product has multiple variants. The options may be chosen on the product page -

Fike Twinflex Hatari Sounder
- Configurable sounder output level
- 100dBa maximum output
- Available in red or white
£22.75 Select options This product has multiple variants. The options may be chosen on the product page -

Fyreye MKII Addressable Combined Smoke & Heat Detector
- Combined smoke and heat A1 detection
- 8 LEDs for 360° visibility
- EN54 parts 5 & 7 certified with LPCB approval
Select options This product has multiple variants. The options may be chosen on the product page -

Kidde Commercial Conventional Optical Smoke Detector
- Programmable smoke sensitivity levels for tailored detection
- Self-diagnostic capabilities for enhanced reliability
- All-round LED visibility for easy status monitoring
-

CAST Multi-Sensor Detector
- A high-quality programmable multi-sensor detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Onboard programmable heat & smoke sensors make it deal for detecting a wide range of fires whilst also reducing false alarms
- Multiple sensitivity/sensor settings
-

Fike Twinflex SoundPoint
- 85dBa maximum output
- Three selectable sounder tones
- Available in red or white
£22.75 Select options This product has multiple variants. The options may be chosen on the product page -

Kidde Commercial Conventional Multisensor Detector
- Integrated photoelectric and heat detection technology
- Programmable smoke sensitivity levels for enhanced adaptability
- All-round LED visibility for easy status indication
Select options This product has multiple variants. The options may be chosen on the product page -

AlarmSense Sounder Visual Indicators Base
- Audio and flasher base
- Sounder range between 70dB(A) and 87dB(A)
-

Fike Sita ASD Addressable Multipoint Detector
- Multi-mode detector offering 6 detection modes
- Available with integral sounder and strobe
- Available in white or black finish
Select options This product has multiple variants. The options may be chosen on the product page -

Hochiki CDX Conventional Fixed 90 Degree Heat Detector
- Electronic linear heat detection
- Remote indicator output
- Wide voltage range (9.5 to 30 V DC)
£21.69 Select options This product has multiple variants. The options may be chosen on the product page -

Apollo XP95 Multisensor Detector
- Sensitive to a wide range of fires
- Well suited for environments such as hotel bedrooms
- Unaffected by wind or atmospheric pressure
-

CXL Universal Call Point
- Choice of Glass or Plastic Elements
- Changeover Contacts
- 470/680 Ohm Resistors
-

Eaton BiWire Ultra Weatherproof Wall Sounder & Optional VAD
- Certified to EN054-3
- Weatherproof
- 3 Selectable Tones
Select options This product has multiple variants. The options may be chosen on the product page -

AlarmSense Open-Area Sounder
- IP65 rated
- Apollo tone - synchronised with AlarmSense sounders and sounder visual indicator bases