Zeta CP4 Addressable Manual Call Point
- Indoor call point compatible with Zeta addressable panels
- Supplied with backbox for surface mount installations (optional flush mount bezel available)
- Very high visibility of the alarm condition
No
Filters
Fyreye MKII Sandwich Sounder & Flasher Base
- Sandwich design between base and detector
- 16 selectable international alarm tones
- Individual or group triggering capability
Xtratone MKII Addressable Sounder
- Indoor MKII addressable sounder compatible with Zeta control panels
- 102dB @ 1m sound output
- Available in Red or White
Xtratone MKII Addressable Sounder & Wall VAD
- Combined sounder and VAD in single unit
- 100dB sound output at 1 metre
- Hard or soft addressable capability
Raptor MKII Addressable Weatherproof Sounder
- IP65 weatherproof sounder
- 16 Tone patterns (site selectable)
- Available in red or white
Raptor MKII Addressable Weatherproof Sounder & Beacon
- IP65 weatherproof sounder/beacon
- Flashing rate 0.33Hz - 1.5Hz
- Available in red or white
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
CAST Detector Base
- The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
- It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
- The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator
C-Tec Hi-Output XP95 Wall Sounder
Key Features
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current./li>
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP21C (Type A) rated.
C-TEC Surface Mounting No Break Fire Call Point
- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
ClamBell EN54-3 Approved Fire Alarm Bell
- Permanently fitted gong.
- Specifically designed weatherproof back box.
- Slick and modern looking.
- Fully customised pad printed branding.
- Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.
Conventional Raptor Sounder Beacon White Flasher
- Complies with EN54 Pt 3 Type B & EN54 Pt 23.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
- Flashing rate 0.5Hz
Conventional Raptor Weatherproof Sounder
- Complies with EN54 Part 3 Type B.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
Conventional Symphoni LX Wall Sounder Beacons
- Ultra low current consumption.
- Up to 7.5m coverage volume (switchable to 2.5m).
- Coverage switch to 2.5m.
- Available as weatherproof (IP66) version.
Cooper Intelligent Addressable Sounder Base
- Integral short circuit isolator
- Integral sensor mounting base
- Can be used with a sensor as a sounder base or stand-alone as a sounder
- Cover plate (optional)
- Quick and simple to install
- Integral short circuit isolator
- First fix base
- Selectable tones controlled by the panel
- Adjustable volume controlled by the panel
- Single point connection for sensor and sounder (saving on both time and installation costs)
- Can be used with a sensor or stand alone
- Easy to maintain/service
Cranford Controls VocAlarm Voice Enhanced Sounder
- High quality digitised voice messaging with crystal oscillator synchronisation
- Extensive message library with over 30 options for fire, security and automation
- Single or dual message models with IP65 weatherproof rating
Cranford Controls VTB Spatial Sounder & Beacon
- 32 tones plus a selectable override tone.
- Shallow base IP43 and deep base IP65 versions available.
- Switch selectable beacon only feature.
- Unique twist and lock bayonet mounting system.
Cranford Controls VTG 24V Spatial Wall Sounder
Key Features
- Fully approved to EN54-3 by LPCB and VdS.
- 32 tones plus a selectable override tone.
- Shallow base IP21C and deep base IP33C versions available.
- Designed to work with both conventional and two-wire (SAV-WIRE ) systems.
- Unique twist and lock bayonet mounting system.
- Removable cover on deep base for surface wiring.
- Features base locking system as standard.
Discovery Marine Manual Call Point
- Flashing LED option to indicate polling (Discovery systems only)
- ‘Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
Discovery Marine Manual Call Point with Isolator
- Flashing LED option to indicate polling (Discovery systems only)
- ‘Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
Discovery Marine Waterproof Manual Call Point with Isolator
- ‘Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
Eaton Base Sounder VAD
- Certified to latest standard EN 54-23
- First fix base
- Fixing platform for most popular detectors
- Tamper proof cap for standalone use (supplied separately)
- For use with or without a detector
Eaton BiWire Ultra Manual Call Point
- Robust Construction
- Fast Fit Clip on Front Cover
- IP22 and IP66 Options
- Compatible with BiWire Accessories