No

• For use on an XP95/Discovery systems.
• Sound output of 85dB(A) at 1 metre.
• Current consumption of only 3mA.
• Loop-powered.
• Responds to signals from the associated detector – does not have an address of its own.

• Ideal in environments that are dirty or smoky under natural conditions
• Well suited for warehouses, loading bays and car-parks
• Unaffected by wind or atmospheric pressure

Compatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.

The Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.

• Patented short-circuit detection technology
• Automatic restoration when fault cleared
• Compatible with XP95, Discovery and CoreProtocol systems

This base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.

• XPERT Addressing.
• One way fit of detector.
• Locking feature to prevent unauthorised detector removal.

The XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.

• Uses high intensity LED.
• EN 54-23 Compliant Category C VAD.
• Flash rate 0.5Hz.
• Fault signal if LED check failed.

• Visual indicator flash rate of once per second
• Synchronisation of visual indicator flash
• Individual and group addressing
• Unique visual indicator self-test
• Loop-powered
• Built-in Isolator

• Two volume settings 92dB(A) and 100dB(A).
• Synchronisation of ‘alert’ and ‘evacuate’ tones.
• Individual & group addressing.
• Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.

• Sensitive to a wide range of fires
• Well suited for environments such as hotel bedrooms
• Unaffected by wind or atmospheric pressure

• Choice of tones on standard device: Apollo, Slow Whoop and DIN.
• Two volume settings 92dB(A) and 100dB(A).
• Synchronisation of 'alert' and 'evacuate' tones.

• EN 54-23 Certified Category O VAD
• 0.5Hz Flash Rate (white)
• Synchronisation of VAD flash
• Individual & group addressing
• Unique VAD self-test
• Loop-powered
• Built-in isolator

• Easily fitted within or on control cabinets.
• Easily fitted to most surfaces.
• Can be used in exposed locations.

• 32 User selectable Tones
• IP45 and IP65 Versions
• 3 Colour Options

• Ultra-efficient LEDs.
• Very low current consumption.
• Sleek, low-profile design.
• Compatible with other Excel Sounders and Sounder Beacons and accessories.
• Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.

• IP66 or weathproof rated (Deep Base option only)
• Very low consumption conventional sounder/flasher
• Easy to install
• Choice of 3 volume levels

• Manual call point for the Infinity ID2 system
• Indoor or outdoor (IP67) version available
• Visible warning flag confirms activation

• Compatible with all MKII range of detectors
• 3 different types of base available

• Indoor call point compatible with Zeta addressable panels
• Supplied with backbox for surface mount installations (optional flush mount bezel available)
• Very high visibility of the alarm condition

• Sandwich design between base and detector
• 16 selectable international alarm tones
• Individual or group triggering capability

• Indoor MKII addressable sounder compatible with Zeta control panels
• 102dB @ 1m sound output
• Available in Red or White

• Combined sounder and VAD in single unit
• 100dB sound output at 1 metre
• Hard or soft addressable capability