Shop
Showing 2901–2950 of 3067 results
-
CQR 12V Access Control Power Supply, 1 Amp
- High efficiency electronics for reduced running costs and lower temperatures
- Full electronic short circuit and overload protection for safety
- Tamper detection for added security
-
Stealth Black 12V 5A Power Supply
- Lockable hinged lid
- Battery back-up ready
- LED status indicators
-
AES e-Loop Micro Wireless Domestic Inductive Loop Kit
- Complete wireless vehicle detection kit
- 25m wireless range with transceiver included
- 2-3 year battery life
-
AES e-Loop Mini Wireless Domestic Inductive Loop Kit
- Complete wireless detection kit with transceiver included
- Multiple variants available for different detection modes and ranges
- Long battery life up to 4 years with AA lithium batteries
-
AES e-Loop Micro Wireless Domestic Inductive Loop Only
- 25m wireless range
- 2-3 year battery life
- IP68 weatherproof rating
-
AES e-Loop Mini Wireless Domestic Inductive Loop Only
- Wireless detection module eliminates traditional inductive loops
- Available in Exit Only or Exit & Presence detection modes
- Long battery life up to 4 years with AA lithium batteries
-
TRX Transformer Rectifier Power Supply
- High efficiency switched mode power supply (not suitable for charging batteries).
- 0.7, 1.0 or 2.5A continuous load rated.
- Regulated 24v dc supply output.
-
Rutland TS.3204 Combined Door Closer with Flat Bar Armset
- Power size 3/4 adjustable
- Certifire approved
- Optional back check
-
Rutland TS.3204 Standard Door Closer with Snapfix Armset
- Snapfix armset
- Maximum door weight 60-80kg
- Max door width 950-1100mm
- Power size EN3/4
-
TS.4204 Size 2-4 Contract Door Closer
- Variable power adjustment from EN2-4 for versatile door applications
- Fire tested up to 120 minutes for enhanced safety compliance
- Back check and delayed action features included as standard
-
TS.9205 Architectural Door Closer
- Up to 82% efficiency with variable power adjustment EN2-5
- Assists Document M and BS 8300 compliance for accessibility
- Available in 15 premium finishes including new Marine Stainless 316
-
Tubular Stand Metal Sign Clip
- Use to attach extinguisher ID signs to tubular stand.
- Unobtrusive design utilises self-adhesive pad for simple installation.
- 1 clip supplied per sign position.
-
TwinflexPro Goody Bag
- Replacement goody bag for TwinflexPro panels
- Contains spare fuses, battery connectors, etc.
- Compatable with 505-0002, 505-0004 & 505-0008
-
TwinflexPro2 505-0007 Conventional Expansion Card
- Expand TwinflePro2 panel with 4 conventional zones.
- Compatible with Apollo, Hochiki, Nittan or System Sensor conventional detectors.
- Compatible with TwinflexPro2 4 zone panel only.
-
Universal 4mm Fire Extinguisher Safety Pins
- Colour coded plastic universal 4mm extinguisher safety pins.
- Available in 6 different colours which fit most modern fire extinguishers.
-
Universal Bracket For FFE Fireray 5000 Detector Head or Prism Plate
- Universal bracket for Fireray 5000 detector head or prism plate.
- Bracket pivots for accurate alignment of beam detector and prisms.
-
Universal Cartridge Extinguisher O-Rings, Pack of 125
- Universal cartridge extinguishers o-rings.
- Pack of 125.
- Available in red, green, blue, orange, yellow or white.
- Suitable for most cartridge based extinguishers.
-
Universal Ceiling Mount for Fireray 5000, 3000, Prism or Universal Bracket
- Universal ceiling mount for the Fireray 5000, Fireray 3000, Fireray prism or Fireray universal bracket.
- Supplied with 2 x mounting plates and 1 x blank cover plate.
-
Universal Horn Extinguisher O-Rings, Pack of 125
- Universal horn extinguishers o-rings.
- Pack of 125.
- Available in black, red, green, blue, orange, yellow or white.
- Suitable for most horn base extinguishers including CO2.
-
Universal Hose Extinguisher O-Rings, Pack of 125
- Universal hose extinguishers o-rings.
- Pack of 125.
- Available in black, red, green, blue, orange, yellow or white.
- Suitable for most hose base extinguishers including water, powder and foam.
-
USB A to B Cable Lead, 5m in Black
- USB lead suiable for program,ming many fire panels.
- 5m in length.
-
Vesda 855 In-line Filter Element, Sold in packs of 4
- Suitable for all Xtralis Aspirating Smoke Detectors.
- Improved detector longevity in applications with high levels of air-borne contamination.
- Reduces maintenance intervals, thus reducing total cost of ownership.
- Requires no additional pipe fi ttings thus reducing cost of installation.
- Improved aesthetics.
- Vertical or horizontal mounting.
- Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors.
-
VESDA High Level Interface HLI
- Direct access and monitoring of VESDAnet system
- Seamless data transfer from your VESDAnet to your PC
- Easily configured using Xtralis configuring and monitoring software packages
- Designed for small or large networks
- VHX-0210 includes modem support for remote notification & interrogation
-
VESDA LCD Programmer
- User friendly menu system
- Supports multiple languages
- Single point access to entire VESDAnet system
- Alarm and fault simulation
- Shows wiring order
- Locates communications failures
- Password security
- Hand held or remote mounting
- Automatic Logoff when inactive
- Backlit LCD screen
-
Vesda VEA Sampling Points
- Two different types, standard and surface mount.
- Available in black or white.
- Full supervision.
- Automated cleaning by the detector.
-
Vesda Xtralis 9 Pin Serial Lead
Enter a brief description of your product here. This description will be displayed on product list pages. -
Xtralis OSID Emitter
- 150m maximum detection range
- Dual wavelength LED detection
- 90° field of view coverage
-
Vesda Xtralis OSID Acrylic Test Filter – Pack of 10
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Vesda Xtralis OSID Emitter Spare Alkaline Battery
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Vesda Xtralis Power Supplies
- Available in three sizes: 0.5 A / 7Ah, 0.5A / 14 Ah and 2 A / 38 Ah
- Temperature compensated charging to maximize battery life
- Designed to blend in with Xtralis detectors
- Knockouts designed to line up with Xtralis detectors
- External LED indication on 220E and 250E
- Internal LED indication on 215E
- Relay outputs for connection to the general-purpose input for fault monitoring.
- 230 Vac only
-
VESDA VLI Intelligent Filter
- Intelligent monitoring system with automatic replacement indication
- Drastically extends detector operational life in harsh environments
- Advanced clean-air barrier technology for consistent sensitivity
-
VESDA VLI Secondary Foam Filter
- Secondary foam filtration removes remaining contaminants after first stage
- Reduces nuisance alarms and prolongs detector life significantly
- Easy replacement design with simple screw-mounting system
-
Vesda Xtralis Refrigerated Storage Sampling Kit
- Enables the ASD pipe to be installed, inspected and maintained outside the Refrigerated Storage facility hence enabling fire contractors to work in ambient conditions most of the time.
- Suited for facilities with and without ceiling cavities
- Eliminates the need for expensive HDPE (high density polyethylene) pipe inside the Refrigerated Storage facility
- Eliminates the need for costly access equipment hire for on-going service/maintenance
- Eliminates the need for heat tracing
- Less prone to blockage due to icing
- Provides a generally more robust ASD installation for these unique environments
- Provides considerably improved aesthetics
- Minimizes the need for “Back Flush” systems
- Offers all round cost savings
-
VESDA-E VEA Filter Cartridge
- Smart on-board filter with dust count tracking and remaining life monitoring
- Effective filtration and optical protection with clean air barriers
- Field replaceable design for minimal maintenance downtime
-
Xtralis In-Line Filter
- Compatible with metric (25mm OD) and imperial (27mm/1" OD) pipes eliminating the need for pipe adaptors
- Requires no additional pipe fittings thus reducing cost of installation
- Reduces maintenance intervals, thus reducing total cost of ownership
-
VESDA-E STX Power Supply Unit
- Available in 0.5 or 2.0 amp sizes.
- Choice of matt block or silver finish.
- Designed to blend in with VESDA-E detectors.
- Knockouts designed to line up with VESDA-E detectors.
-
VESDA-E VEA Addressable Multi-way Interface, Pre-wired & Pre-addressed
- Pre-wired OEM interface assembly
- Pre-addressed pipe relays as per client specification
- Supporting the major addressable fire alarm protocols
- Full functional and 24 hour soak test prior to delivery
- Easy installation reducing overall completion time
-
Vimpex 6 or 8 Inch Weatherproof Bell
- Weatherproof fire alarm bell suitable for external applications
- Available in either 6 or 8 inch versions
- Excellent sonorous tone up to 100dB(A) at 1m
-
Vimpex Identifire IDBTS Base Sounder with Cover
- Slimmest profile in the industry
- 32 user-selectable tones
- EN 54-3 tested and fully approved
-
VoCALL 5 Emergency Voice Communication Control Panel
- Capability of running outstations or emergency assist alarms.
- Simple cabling enables direct connection to outstations.
- Steel flush mount cover option for challenging environments.
-
VoCALL CFEAODI Emergency Assist Overdoor Indicator
- Provides an audible and visual signal to indicate the area where assistance is required
-
VoCALL CFEAPULL Emergency Assist Pull Cord Unit
- Positioned so that its readily accessible from the WC or bath (where applicable).
-
VoCALL CFEARSP Emergency Assist Cancel Button
- Cancel button for VoCALL emergency assist system.
-
VoCALL Type B Outstation
- Tactile Braille signage and loop output.
- Works with all analogue VoCALL systems.
- Neatly designed for ease of installation.
-
Omnicare Control Panel
- Loop wiring.
- One loop for multiple styles of remote unit.
- Combined outstation available featuring a disabled refuge and fire telephone in one housing.
- Full networking and multi-panel facilities.
- All outstations powered from the line, including toilet alarms.
- Advance disabled refuge remote option.
- Robust, reliable and well established system.
-
Baldwin Boxall Omnicare Type B Green Disabled Refuge Remote
- Provides two-way, hands free, speech steered communication.
- Self-powered from ring circuit, no local power source is required. Automatic battery backup is provided by the control panel in the event of a mains power failure.
- Green finish (also available in stainless steel BVOCECPG).
- Volt free contact, active when occupied. To operate over-door lamps, silence speaker/sounder, etc.
- Stainless steel ‘press to call’ button.
- Calls can be reset either by of the key-switch on the remote unit or at the master control panel.
- Option to be permanently ‘active’ if required.
- Reset from either remote unit using the key switch or via the master control panel.
- All outstations are in a loop circuit from control panel(s).
- A link to the fire detection system prevents hoax disabled refuge calls. This feature can be completely, or partly, overridden.
- Surface mounting unit (can be flush mounted using a bezel).
-
Baldwin Boxall Omnicare Type A Red Fire Telephone with Push Door BVOCF
- Provides two-way, hands free, speech steered communication.
- Self-powered from ring circuit, no local power source is required. Automatic battery backup is provided by the control panel in the event of a mains power failure.
- Red finish (also available in stainless steel BVOCFS).
- Push catch door (slot lock version available BVOCFL).
- Addressable unit.
- The enclosure contains a rugged red handset with hearing aid compatible earpiece and loudspeaker.
- Calls are initiated upon opening the door. When answered, the user can talk to the operator either by lifting the handset or hands-free. Closing the door ends the call.
- Conference call facility between multiple fire telephones is available via the operator at the control panel.
- All outstations are in a loop circuit from control panel(s).
- Surface mountable (or flush mount with optional bezel).
-
Baldwin Boxall BVFREPEM Interface Unit
- Functions as a booster unit to enable cable runs exceeding 200 meters between remote units
- Serves as an interface for BVOCDTA toilet/emergency assistance alarm kits
- Acts as a remote power monitor
-
Disabled Refuge Type B Outstation – Hands Free or Jack Socket Outstation
- Surface mount compact enclosure
- Full duplex operation allowing 2 way voice communication
- Status LED
- High volume ringer
-
Baldwin Boxall BVOCRIF OmniCare Repeater & DTAKIT/S Interface
- Use the BVOCRIF as an interface for the DTAKIT (three part) toilet alarm system
- Up to two DTAKITs can be fitted to each BVOCRIF repeater (will show as one point on the control panel)