Shop
Showing 1251–1300 of 3067 results
-
Infinity8 Conventional Fire Alarm Panel
- Optional 24V aux supply (4-8 zone versions only)
- Optional non-latching zone
- Fault relay can be configured as 2nd fire relay
-
Kentec Sigma CP Conventional 2, 4 or 8 Zone Panel
- Fully certified to BS EN54-2 and BS EN54-4
- 2, 4 or 8 version zones
- Surface and Flush Mounting Options
-
Eaton Flexi BiWire or Conventional Panel
- Configure zone wiring to work as either a conventional or two-wire system
- Allows the connection of an existing conventional system to a BiWire system
- Compatible with two-wire and conventional EN 54-23 certi ed visual alarm devices (VADs)
-
Infinity ID2 Repeater Panel
- Can be programmed to act as fully functional (ability to silence/reset) or passive (shows alarm info only)
- 4 cores required from ID2 panel (2 data + 2 power)
- Can powered from 24V auxiliary PSU in the ID2 panel
-
Fike Twinflex Pro2 Repeater Panel
- Compatible with the 4 or 8 zone Twinflex Pro2 panels only
- Reports Twinflex Pro panel events to a remote location
- Capable of performing system controls (i.e. Silence Alarms, Reset, Sound Alarms & Silence Buzzer)
-
Infinity ID2 Detector With Optional Integral Sounder
- 4 types of detector available
- All available with optional integral sounder
- Remote LED output
-
Black Infinity ID2 Detector With Optional Integral Sounder
- Black plastic moulding to meet aesthetical requirements
- All available with optional integral sounder
- 4 types of detector available
-
-
Twinflex ASD Multi-Function Detector With Optional Sounder And Strobe
- Available as detector only, with sounder or with sounder/strobe
- 6 selectable modes of detection
- Inbuilt selectable end of line
-
Gent Xenex Conventional Panel
- 2, 4 or 8 zone conventional panel from Gent
- Up to 8 conventional sounder circuits
- One-man test and commissioning features
-
Twinflex ASD Detector with Optional Sounder in Black
- Twinflex ASD detector in black plastic moulding
- Available as detector only or with integral sounder
- 6 selectable modes of detection
-
AlarmSense Optical Smoke Detector
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
-
AlarmSense AlarmSense Heat Detector
- Can be used for applications where smoke detectors are unsuitable
- Two types available; fixed heat (CS) or rate-of-rise (A1R)
-
Apollo Alarmsense Integrating Optical Smoke Detector
- Responds Well to Slow Burining Smouldering Fires
- 360 Degree Visibility of LED's
- Reduces False Alarms
- Quick Simple Installation
-
Eaton BiWire Ultra 5 in 1 Detector
- DIL-Switch Mode Selection
- Non-Latching Mode for HMO Use
- 15m Optical Range
- 2 Core Wiring
-
Esento Eclipse Conventional or Save-Wire Panel
- 2 or 4 zones
- False alarm management
- Twin Wire selection
-
Haes Esento Excel Sav-Wire or Conventional Panel
- 2-12 zones
- Individually selectable Twin Wire zones
- Network up to 8 control panels
-
Apollo Series 65 Optical Smoke Detector
- Responds to slow fires
- Suitable for bedrooms
- Unaffected by wind
-
Apollo Series 65 Conventional Heat Detector
- Wide operating voltage range 9V to 33V
- Multiple temperature variants for different applications
- Dual thermistor network with rate of rise detection
-
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
ActiV Mounting Base
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter
- C4408D diode and C4408 non-diode bases available*
- Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
ActiV Relay Base with Diode
- Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output
- Ideal for switching CCTV, security and door retaining systems
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- C4408R non-diode relay base also available for use on systems that do not require head out monitoring
-
Simplicity CO Addressable Carbon Monoxide Panel
- Addressable carbon monoxide system
- 2-8 zones with a maximum of 126 devices
- Radial or Loop wiring formats (selectable on panel)
- Suitable for many applications including underground carparks
-
Simplicity CO Addressable Carbon Monoxide Detector
- IP54 rated for harsh environments
- Wide detection range 0-600 ppm
- 300m² coverage area
-
Addressable Maxitone Sounder Red or White
- Available in Red Or White
- 2 Available Tones
- Addressable
- IP65 Ingress Protection
-
Addressable Remote Indicator (10 Address)
On modern addressable fire alarm systems, the remote output of a detector may often be unavailable because it is used for another purpose, to drive a sounder base, or a relay base for example
-
Addressable Remote Indicator LED (1 Address)
On modern addressable fire alarm systems, the remote output of a detector may often be unavailable because it is used for another purpose, to drive a sounder base, or a relay base for example
-
Adjustable L Bracket to suit Superior Surface Magnets
- Adjustable L bracket the superior grade 4 surface magnets AEM12100 & AEM12200.
- Suitable for inward opening doors.
- Finish matches the electro magnet.
-
Adjustable Wall Bracket For The Firebeam & Zeta Beam Detector
- Dual axis swivel joints mean total flexibility in aligning beam and reflectors.
- High quantiy steel consruction.
-
ADP324-FR 24V DC Power Supply Unit
- 24V DC 500mA switch mode power supply
- Microprocessor controlled with battery monitoring
- Twin independent switched outputs
-
Advanced 1.5A, 3A or 5A Boxed Power Supply With Battery Charging
- EN54-4 certified fire alarm power supply
- Available in 1.5A, 3.0A and 5.0A outputs
- High efficiency switch mode technology
-
Advanced 12V 1.5A Boxed Power Supply With Battery Charging
- Suitable for use with a wide range of control equipment.
- 12V supply (1.5A only)
- High efficiency switched mode power supplies.
-
-
Advanced GOP-001 GO1 P-BUS Adaptor Card
- Used to connect local peripheral equipment to GO1 panels.
- PBUS modules must be configured using the PC Tool.
-
Advanced GOP-002 GO1 Access Enabled Key Switch Assembly
- Replacement access enabled key switch assembly for Advanced GO1 panels.
-
Advanced Loop Driver for MX-4400 or MX-4200 Panels
- Dual protocol support for Apollo Discovery/XP95 and Hochiki ESP detector systems
- 500mA maximum current capacity per loop during alarm conditions
- Designed for MxPro 4 analogue addressable fire alarm panels
-
Advanced Mx Pro Logo Programming Software
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Advanced MX Upload / Download Lead
- RS232 9-way to 3-way connector
- MxPro 4 & 5 panel compatibility
- Serial upload/download functionality
-
Advanced Semi-Flushing Bezel for MxPro 5 Remote Terminals
- Semi-flushing bezel for MxPro 5 remote terminal displays
- Supplied with fitting kit for a quick and easy solution
-
Advanced MXP-532 General Routing Interface
- Two fire routing outputs.
- Outputs are monitored for open and short circuit wiring issues.
-
Advanced MXP-554 IP Gateway LAN Interface
- Provides remote access to devices on an Ad Net network..
- Configurable event email notification.
- Compatiable with both Mx-5000 & Mx-4000 series fire panels.
- Available as PCB only or boxed in enclopsure.
- Option of standard or fault-tolerant networks.
-
Advanced MxPro 5 Remote Terminal
- Programmable switch input
- Graphical LCD Display
- Ad-NeT/Ad-NeT+ Compatible
- Slide-in Labels
- Small, Robust & compact
- 24V DC Operating voltage
- 3 Year Warranty
- Disable/enable options
-
Advanced MxPro 5 Access Enable Key Switch
- Enable/disable controls.
- Group isolate to disable I/O across network.
- For use to start/enable a class change.
-
Advanced MxPro 5 AlarmCalm Button with Buzzer
- Complete false alarm management with verification and investigation delays
- AlarmCalm button module for manual acknowledgement by occupants
- Compatible with MxPro 5, Go, Axis EN and AxisGo fire panel ranges
-
Advanced MxPro 5 Document Enclosure
- Designed for IP30 protection.
- AC terminal block and leads.
- Internal labelling.
- Hinge pins.
-
Advanced MxPro 5 Key Switch
- Enable/disable controls.
- Group isolate to disable I/O across network.
- For use to start/enable a class change.
- Trapped and un-trapped key switches available.
- Control of multi-sensor/device sensitivity mode change.
- Simple to install and configure.
-
Advanced MxPro 4 Ad-NeT Network Card
- True Peer to Peer
- Up to 1.5Km between Control Panels
- Windows based PC Set Up
- Network Analysis
-
