No

• Intrinsically safe for use in hazardous areas
• IP67 rated for indoor and outdoor applications
• Rapid alarm reporting in less than 0.2 seconds

Compatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.

The Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.

• Patented short-circuit detection technology
• Automatic restoration when fault cleared
• Compatible with XP95, Discovery and CoreProtocol systems

This base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.

• XPERT Addressing.
• One way fit of detector.
• Locking feature to prevent unauthorised detector removal.

• Uses high intensity LED.
• EN 54-23 Compliant Category C VAD.
• Flash rate 0.5Hz.
• Fault signal if LED check failed.

• Two volume settings 92dB(A) and 100dB(A).
• Synchronisation of ‘alert’ and ‘evacuate’ tones.
• Individual & group addressing.
• Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.

Enter a brief description of your product here. This description will be displayed on product list pages.

Enter a brief description of your product here. This description will be displayed on product list pages.

• Manual call point for the Infinity ID2 system
• Indoor or outdoor (IP67) version available
• Visible warning flag confirms activation

• Compatible with all MKII range of detectors
• 3 different types of base available

• Sandwich design between base and detector
• 16 selectable international alarm tones
• Individual or group triggering capability

• Indoor MKII addressable sounder compatible with Zeta control panels
• 102dB @ 1m sound output
• Available in Red or White

• Combined sounder and VAD in single unit
• 100dB sound output at 1 metre
• Hard or soft addressable capability

• IP65 weatherproof sounder
• 16 Tone patterns (site selectable)
• Available in red or white

• IP65 weatherproof sounder/beacon
• Flashing rate 0.33Hz - 1.5Hz
• Available in red or white

• Impressive 96dB(A) sound output @ 1m.
• Supplied with a BF431QCP quick connect plate and detector spur wires.
• Onboard short-circuit loop isolator.

• The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
• It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
• The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator

• Cable termination: 5-2.5mm 2
• Maximum voltage: 30Vd.c
• Current rating: 2 Amps
• IP rating: IP24D
• Material: PC/ABS
• Weight: 160g
• Dimensions: 89x93x59mm
• Colour: Red

• Supports either a ‘Frangible’ glass element or a ‘Non Frangible’ plastic element
• Rugged design with ATEX classification
• SIL Level 2 approved variant available

• Flashing LED option to indicate polling (Discovery systems only)
• ‘Plug and Play’ terminal connections for fast wiring
• Continuity link for wiring test before commissioning
• Reports an alarm in under 0.2 seconds
• Resettable element

• Robust Construction
• Fast Fit Clip on Front Cover
• IP22 and IP66 Options
• Compatible with BiWire Accessories

• First fix base.
• Loop integrity switch.
• Multiple cable entry points.