Eaton Base Sounder VAD
- Certified to latest standard EN 54-23
- First fix base
- Fixing platform for most popular detectors
- Tamper proof cap for standalone use (supplied separately)
- For use with or without a detector
Conventional
Filters
Esento Marine Approved 12 Way Fire Alarm Repeater Panel
- 12 zonal fire and Fault Indications
- Integeral 1Amp Switch Mode PSU
- Programmeable Output
- Space for Up to 3.2Ah Batteries
Esento Marine Approved 2-4 Zone Alarm Control Panel
- Available in 2 or 4Zones
- Marine approved
- Muster Alarm
- Class Change and Pulsing Inputs
Esento Marine Approved 8-12 Zone Control Panel
- 8-12 Zone Panels Available
- Compatible with Repeater Panel
- Programmeable Output Delays
- Class Change and Pulsing Inputs
Fulleon Askari Compact Conventional Sounder in Red or White
- 32 tones (user selectable)
- Automatic synchronisation
- Two stage alarm
- Discrete design
- Available in Red or White
Fulleon Flashni Conventional Xenon Sounder Beacon
- High output sounder beacon.
- 12V, 24V and mains module option.
- Choice of lens colour options.
- Automatic sounder synchronisation.
Fulleon Solista Conventional LED Beacon Red Case / Clear Lens
- Ultra low current.
- LED technology.
- High reliability.
- Long service life.
- Locking base.
- Compact size.
Fulleon RoLP LX Roshni Wall Sounder Flasher - Red
- Ultra Low Current Consumption
- Up to 7.5M Coverage
- Switchable Flash Rate
- IP65 Protected
Fulleon SQG3 Base Sounder in White Housing
- Conventional platform sounder.
- Supplied in white housing.
Fulleon Squashni Conventional Platform Sounder
- Fixing platform for detector or beacons
- Low current consumption
- Blank cover for use as a stand alone sounder
- Reduced installation cost
- Colour matched to leading manufacturers detectors
- Tamper proof cap
Fulleon Symphoni Low Current Wall Sounder
- Low 5mA current consumption.
- 100dB(A).
- Automatic synchronisation.
- Weatherproof option.
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
Hochiki CDX Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification
- Approved by LPCB and VdS
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
Gent Indoor Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
Gent Weatherproof Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
Hochiki CDX Conventional Combined 60 Degree Heat Detector
- Electronic linear heat detection
- Twin fire LEDs allow 360° viewing
- Approved by LPCB & VdS