Fire Alarm Accessories
Showing 25–48 of 289 results
-
Haydon HAY-PSUEN54-2AL | EN54-4 Power Supply | 24V DC, 2A, Large Enclosure
- Amber LED gives detailed engineer fault codes
- Houses two 18Ah batteries for extended standby
- Separate GEN and EPS fault reporting outputs
-
Linian Coaxial Clip – Pack of 100
- For CCTV, AV and Satellite TV installations.
- Resists tensile loads of 244N.
-
Elmdene STX 24V DC STX Power Supply, Maximum 17Ah Batteries
- EN54 PSU with choice of 2, 5 or 10A output
- Enclosure fits up to 2 x 17Ah 12V batteries
-
LINIAN NanoClip Fibre Optic Cable Clip – Pack of 100
- 18th Edition compliant cable clip.
- Secure, single-component design.
- Quick & easy installation.
- No plastic.
- Melt point >1200°C.
- No plugs, screws or washers needed.
- Corrosion-Resistant, UV Stable Coating.
- Suitable for indoor or outdoor use.
- Discreet and barely visible.
- Made in Britain.
-
Haydon HAY-PSUEN54-5AL | EN54-4 Power Supply | 24V DC, 5A, Large Enclosure
- 5A output with 2x18Ah battery capacity
- Two-stage charging for full capacity
- GEN and EPS fault reporting outputs
-
Linian SuperClip for Conduit, Armoured or Grouped Cables – Pack of 25
- Rapid fixing clips for Conduit, Armoured or Grouped Cables.
- Fast – 70% quicker to install than traditional methods.
- Sold in packs of 100.
-
Firebeam EN54 24Vdc 1.5A Power Supply
- 24VDC 1.5A regulated output with battery charging capability
- EN 54-4 and EN 50131-6 compliant for fire and security applications
- Integrated battery monitoring with fault detection and relay output
-
Linian T&E Clip for Flat Twin & CPC Cabling – Pack of 100
- Twin, cpc cabling and PVC trunking.
- Anchor fixings for wire etc.
- Corrosion Resistant – UV Stable.
- Fire Rated.
- 18th Edition Compliant.
-
Advanced MXP-650 2.5A Boxed Power Supply
- 2.5A output
- Housing fits 2 x 17Ah batteries or 2 x 24Ah/38Ah batteries (deep version)
- A range of power supply equipment with power output options to suit most applications
- Universal AC input
-
-
Advanced MXP-651 5A Boxed Power Supply
- 5A output
- Housing fits 2 x 17Ah batteries or 2 x 24Ah/38Ah batteries (deep version)
- A range of power supply equipment with power output options to suit most applications
- Universal AC input
-
Elmdene TRS1 24V DC 1 Amp Door Retainer Power Supply
- Fail safe operation suitable for door holders
- 1A output
-
C-Tec FF380X | EFPX Expansion Loom & Terminals | For EFP1 Fire Alarm Panel
- Expansion loom and terminals for the C-Tec EFP1 fire alarm panel
- Designed specifically for use with the C-Tec FF380-2 EFP1 control panel
- Enables system expansion capabilities
-
Elmdene TR 24V Transformer Rectifier
- 24V transformer rectifier with choice of 2 or 4A output
- Ideal for magnetic door retainers
-
Casil CA650-V0 | CA Series 6V 5.0Ah Sealed Lead Acid Battery | Maintenance-Free, 5-Year Design Life, UL 94 V-0 Fire Retardant
- Flame retardant ABS casing for panel and cabinet fitting
- 50A five-second surge discharge capability
- Low 20mΩ internal resistance for stable output
-
Haydon HAY-PSUEN54-1A | EN54-4 Power Supply | 24V DC, 1A, Small Enclosure
- Amber LED gives detailed engineer fault codes
- Small enclosure houses two 7Ah batteries
- GEN and EPS volt-free fault reporting outputs
-
Haydon HAY-PSUEN54-5A | EN54-4 Power Supply | 24V DC, 5A, Small Enclosure
- Five-code amber diagnostic LED for fault finding
- 5A continuous output for larger auxiliary loads
- Separate GEN and EPS volt-free fault outputs
-
C-Tec 24V 250mA Door Release Power Supply Unit
- Two model variants: basic integration (BF375P) and integrated detector circuit (BF375PE)
- Powers up to 5 electromagnetic door retainers at 250mA output
- Compact double gang mounting with comprehensive trigger inputs
-
Dycon 1 Amp Magnetic Fire Door Holder Power Supply
- 24VDC 1A output for magnetic door retainers
- Powers up to 16 retainers (8 double doors)
- Opto-relay output for remote fault signalling
-
IP65 Weatherproof 24V Power Supply
- IP65 rated PSU suitable for outdoor applications.
- Optional battery charging.
- Options fault outputs.
-
Gent 34000 Series Remote LED Indicator
- Maximum 100 per loop
- Device load factor 1
- For use with S4-700 base
-
EMS Firecell FC-809-000 AA Cell 1.5V Alkaline Battery
- AA cell 1.5V alkaline battery for EMS Firecell devices
- Official EMS Firecell specified battery
-
EMS Firecell FC-810-000 C Cell 1.5V Alkaline Battery
- C cell 1.5V alkaline battery for EMS Firecell devices
- Official EMS Firecell specified battery
-
NoBurn Red Platinum 2 Core Fire Resistant Cable (1.5mm or 2.5mm)
- 1.5 or 2.5mm core diameter available.
- Choice of 100m or 200m reels.
- Easy to install.
- Superb working flexibility.