Fire Alarm Accessories
Showing 151–200 of 233 results
-
Fire Marshal Online Video Training (Single User License)
- Online Fire Marshal Training
- Video based online training
- Institute of Fire Engineers approved
- Complies with fire safety law Regulatory Reform (Fire Safety) 2005
- Reduces training costs
- Multiple choice questions
- Automatic certification
-
Fire Safety Log Book
An A4 fire log book that allows you to keep critical fire safety information and records in one place
-
Firebeam EN54 24Vdc 1.5A Power Supply
- 24VDC 1.5A regulated output with battery charging capability
- EN 54-4 and EN 50131-6 compliant for fire and security applications
- Integrated battery monitoring with fault detection and relay output
-
Fuse Kit For Fire Alarm Engineers
- Boxed kit of most popular fire alarm panel fuses
- Includes a total of 120 fuses
-
Fyreye MKII Addressable LED Remote Indicators
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Fyreye MKII Hand Held Programmer Tool
- 2 LED indications. One to indicate that the unit is charging, the other one indicates the status of the detector`s remote LED output.
- Battery Charge state indicator
- Auto-Off when the programmer is not operated for two minutes
- External Reset Funtion
- 20x4 Character LCD Display
-
Gent VS-KEY Spare Door Key for Vigilon & Compact Panels
- Spare door key for Gent Vigilon & Compact panels.
- Available individually or in packs of 10.
-
Gent: Call Point Test Key – Pack of 10
Key Features
- Gent - Call Point Test Key - 14112-10 (Pack of 10)
- This is a replacement Test Key for Gent Manual Call Points.
-
Haes 134 Access Control Keys, Sold In Pairs
- Access control keys for Haes control panel.
- Sold in pairs.
-
-
Haes BRISOL-R Boxed Isolate Relay
- 8 amp double pole relay.
- Contacts rated at 250v ac.
- Isolate key switch.
- Isolated LED indicator.
- Option to use key switch to energise the relay.
-
Haes BRLDA Lockdown Alert Alarm Pulsing Relay
- Provides pulsing or continuous alert of the impending lockdown of a building.
- 8 amp double pole relay.
- Use with existing re control panel.
- Key switch activation.
- Alarm status LED indicator.
- ON & OFF pulsing times independantly programmable up to 15 seconds for truly customised ringing pattern.
- Suitable for surface or flush fitting.
-
-
Haes Fire Alarm Isolate Switch
- Complies with the recommendations of BS 5839 Pt 1 & BS EN60669
- Suitable for surface or recess fitting
- Low profile lid (15mm)
-
Haes Fire Alarm Panel 107 Spare Barrel Keys (Pair)
Spare 107 Key for Haes Fire Alarm Panel Keyswitch -
Haes LOCK801 Replacement Lock Assembly & Keys for Haes Control Panels
- Replacement lock assembly for Haes control panel.
- Included a pair of 801 keys.
-
Haes Replacement Keyswitch Assembly For Esento Evoque, Excel, Eclipse Esprint & Fusion
- Replacement / spare key and lock
- Ideal for Haes fire alarm panel doors
- Old part number: SWK107WIRED
-
Heatshrink Crimp Terminal Butt Connectors, Pack of 100
- High quality crimp terminals.
- Adhesive heat shrink insulation.
-
High-Quality 316 Grade Stainless Steel Cable Ties – Packs of 100
- High quality Stainless Steel cable ties.
- Standard in 316 grade stainless steel.
- Sold in packs of 100.
-
Hochiki CHQ-ARI Addressable Remote Indicator
- Addressable remote LED indicator for Hochiki ESP range
- High Intensity LED technology
- Addressable via Hand Held Programmer (TCH-B100)
-
Varta CR2032 3V Lithium Battery, Pack of 5
- 3V nominal voltage with 230 mAh capacity
- Wide operating temperature range -20°C to 70°C
- Compact coin cell design 20mm diameter
-
Hochiki ESP Device Address Programmer
- Recently been restyled to provide a more rugged yet light enclosure.
- Handheld programming tool for Hochiki ESP devices.
- Lightweight design.
- Battery operated with a capacity of 8,000 operations.
-
Hochiki Installation Kit for YBN-UA / YBO-UA(WHT) (YYA-A)
- For use with YBN-UA Recess Mounting Adaptor.
-
Hochiki Manual Call Point Key (Pack of 10)
- Comes in Pack of 10 Pcs
- Key for Hochiki Call Points
-
Hochiki Recess Base Adaptor (required YYA-A)
- Allows base and analogue sensor or conventional detector to be flush mounted.
- Supplied with fixing brackets.
- Colour-matched to existing ivory and white sensor/detector ranges.
- Sturdy construction, easy to install.
- Suitable for a maximum ceiling thickness of 30mm.
-
Identifire 12 or 24V Single Gang Power Supply
- Works at 12 or 24 V dc selectable via link.
- Consistent Identifire design.
- Can be surface or flush mounted.
- Bright green LED power indicator.
- PCB cover to protect users from mains voltage.
-
Identifire 24 or 12V Auxiliary Relay
- Flush or surfaced mounted options Mains voltage switching capability.
- 4 x 20 mm knockouts for surface and glanded cable entry.
- Terminals to allow daisy chaining of multiple units.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltages.
- Bright LED indicating unit activation.
- Consistent look and feel to all other Identifire products.
-
IdentiFire Remote LED Indicator With Optional Buzzer
- Very bright, easily visible LED.
- Suitable for use on both conventional and addressable alarm systems.
- Available as flush or surface mounted option.
- Available with optional buzzer.
-
Identifire Wide Voltage Relay
- Wide Voltage range for multipurpose use.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltage.
- Terminals to allow daisy-chaining of multiple units.
- Flush or surface mounted options.
-
IP65 Weatherproof 24V Power Supply
- IP65 rated PSU suitable for outdoor applications.
- Optional battery charging.
- Options fault outputs.
-
Isolatable Timer Relay | 24V DC with Key Switch | Adjustable Delay (0-5 Mins) | Red Boxed
- Adjustable 0-5 minute timer delay with visual LED indication
- Keyswitch isolation prevents unwanted activation during testing
- Dual trigger inputs: 24V DC or fire alarm bell circuit
-
-
KAC Indoor Single Pole Keyswitch
- Indoor keyswitch with single pole relay.
- Option of 2 or 3 position keyswitch.
- Option for key to be trapper or un-trapped.
-
KAC SC087 Spare Keys for 3 Position Keyswitch, Pack of 6
- Replacment keys for KAC 3 position keyswitches.
- Sold in packs of 6.
-
Kentec B3225 | Replacement Cabinet Lock | Fits Sigma CP, XT & Syncro AS Enclosures
- Compatible with Kentec panels ending M1, M2, L2, H2, F2, M3, H3, D3, M4
- Complete barrel and key assembly set with model 801 key
- Mini camlock design for Kentec and Syncro panel cabinets
-
Kentec Conventional Panel Enable Key
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Economy Software Download Lead
- Universal compatibility with Syncro, Solo and Solex panels
- Essential for panel programming and commissioning
- Works with Loop Explorer configuration software
-
Kentec Fire Alarm Documents Box
- Matches design & colour scheme for standard Sigma CP/XT and Syncro AS control panel ranges.
- Easy to install.
- Key Lockable.
- Designed for versatility.
- Choice of small or large capacity enclosure.
-
Kentec Fire Alarm Panel Spare Key Set
- Spare keys for control panels
- Compatible with Sigma, Taktis, Syncro
- Pack of five keys
-
Kentec Vision Window Retrofit Tamper Resistant Vision Window
- 2 minutes to fit on site.
- Kit available from stock.
- Colour to match standard Control Panel ranges.
- Special colours available on request.
- Fits any M2, H2, M3, H3 and M4 sized control panel.
- Attractive design.
- Key lockable.
-
Kentec Vizulinx Alarm Management Gateway In Optional Enclosure
- Monitor fire alarm activity on your workstation or device.
- Receive alerts by email, SMS or pager.
- Easy user subsription function - opt in/out via text.
- Defined message notification for manager, engineers or building occupiers.
- Compatible with Modbus protocols.
- Configuratruion through embeded web server.
- Quick setup, user friendly operation.
- Internal memory event log.
-
-
Keyguard Emergency Key Box
- Snatch off plastic window.
- Stores both keys and cards.
- Ideal for restricted access areas.
- Plastic window makes the Keyguard the ideal choice for food preparation areas.
- Available in Red or Green.
-
Keyguard Emergency Key Box Spare Plastic Windows
Keyguard Spare Plastic Windows are available in packs of four. Each window is printed with graphical directions making operating instructions clear to users of any language.
-
Keyguard Emergency Key Box with Integral Audible Alarm
- Integral electronic alarm.
- Stores both keys and cards.
- Ideal for restricted access areas.
- Plastic window makes the Keyguard the ideal choice for food preparation areas.
- Available in Red or Green.
-
Keyguard Emergency Key Box with Single Pole Microswitch
- Snatch off plastic window.
- Can be wired into existing alarm systems.
- Stores both keys and cards.
- Ideal for restricted access areas.
- Plastic window makes the Keyguard the ideal choice for food preparation areas.
- Available in Red or Green.
-
Linian Coaxial Clip – Pack of 100
- For CCTV, AV and Satellite TV installations.
- Resists tensile loads of 244N.
-
Linian Fire Cable Clips – Pack of 100
- 70% quicker than conventional fire clips
- Suitable for single or double cable runs
- Available in Red, White or Black
-
LINIAN NanoClip Fibre Optic Cable Clip – Pack of 100
- 18th Edition compliant cable clip.
- Secure, single-component design.
- Quick & easy installation.
- No plastic.
- Melt point >1200°C.
- No plugs, screws or washers needed.
- Corrosion-Resistant, UV Stable Coating.
- Suitable for indoor or outdoor use.
- Discreet and barely visible.
- Made in Britain.
-
Linian SuperClip for Conduit, Armoured or Grouped Cables – Pack of 25
- Rapid fixing clips for Conduit, Armoured or Grouped Cables.
- Fast – 70% quicker to install than traditional methods.
- Sold in packs of 100.