Fire Alarms
Showing 1537–1560 of 2001 results
-
Cranford Controls DRW Series Wall Mounted Door Retainers
- Manual release button.
- Provided complete with keeper plate.
- Rapid and easy installation.
- Additional accessory products available.
-
Cranford Controls Vandal Proof Floor Mounted Door Holder
- Two holding force options available (200N and 500N versions)
- Vandal-proof variants with enhanced protection against damage
- Cast aluminium housing with integral ejection pin for reliable operation
-
Cranford Controls VTB Spatial Sounder & Beacon
- 32 tones plus a selectable override tone.
- Shallow base IP43 and deep base IP65 versions available.
- Switch selectable beacon only feature.
- Unique twist and lock bayonet mounting system.
-
Cranford Controls VTG 24V Spatial Wall Sounder
Key Features
- Fully approved to EN54-3 by LPCB and VdS.
- 32 tones plus a selectable override tone.
- Shallow base IP21C and deep base IP33C versions available.
- Designed to work with both conventional and two-wire (SAV-WIRE ) systems.
- Unique twist and lock bayonet mounting system.
- Removable cover on deep base for surface wiring.
- Features base locking system as standard.
-
Ctec 827 Panel Entry Access Key For Old Style CFP Panels
- Ctec 827 Panel Entry Access Key For Old Style CFP Panels.
-
Xtralis 18-400 | ProReact EN Digital Sensor Control Unit | Dual Zone, 2000m Coverage, EN54-28 Certified
- Dual zone monitoring up to 2,000m
- Alarm point distance locating display
- Interlock detection mode cuts false alarms
-
Apollo DIN-Rail Interface Enclosure
- IP67 rated with frosted polycarbonate lid for LED viewing
- Two sizes available for different DIN-rail interface capacities
- Compatible with intrinsically safe barriers and XP95/Soteria interfaces
-
DIN-Rail Zone Monitor with Isolator
- Loop-powered
- Visible short-circuit and alarm
- LEDs Built-in Isolator
-
DL-PRO Ceiling Mounting Detector Faster Fix Box
- 4 x side entry points.
- Low installed profile.
- Large load bearing surface to eliminate pull through.
- Snap and push fit together.
- Fits board thickness from 5mm to 31mm.
- Fit from above or below ceiling – so fit when you want – no waiting for ceilings.
- Removable and reusable.
-
Document Cabinet with Keylock or Latch
- Choice of keylock or latch.
- Available in red or white.
- Strong metal construction.
- Powder coated finish.
- Identification label supplied.
-
Dorgard Fire Door Retainer
- Available in 7 different colours/finishes
- Quick to install wireless door holder unit allowing you to legally hold fire doors open
- Improves access for wheelchair users in line with the Disability Discrimination Act and complies with BS EN 1155
-
Nittan Evolution Dual Input, Single Output Module with Isolator
- Dual Input, single output module for Nitttan Evolution addressable systems
- Integral short circuit isolator
-
Dual Input, Zone Monitor Module with Isolator
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Dual Output Sounder Control Module with PSU Fault input and Isolator
- Dual output sounder control module for Nittan Evolution system.
-
Duct Sampling Tube
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Duracell Procell 6LR61 9V Plus Power Battery
- 9V alkaline battery from Duracell.
- Superior Nylon top closure helps preventing our batteries from leakage.
- Duracell technology keeps the energy of your unused batteries for up to 5 years in their packaging (ambient storage).
- 98% of our paper-based packs are made from recycled materials.
-
Dust Filter for FIRElink 25 or 100 Aspiration Detectors
- Compatible with FIRElink 25 and FIRElink 100 ASD units.
-
Dycon 12 or 24V Universal Relay Output Module
- Converts a single power output to relay operation.
- 12VDC & 24VDC versions.
- Selectable, replaceable, glass fuse options.
- LED status indications.
- Useful for intruder & access control applications.
- Ideal as fire door control relay in access systems.
-
Easy Relay 12V Security Panel Relay (12V DC Coil)
The Easy Relay 12 is an 8 Amp switching relay that can be used in a wide variety of 12V DC applications including security system interfacing.
-
Easy Relay 12V Security Panel Relay (12V DC Coil) in White or Red Single Gang Box
The Easy Relay 12 Single Gang Form Factor fits any standard single gang box. Designed for use as a security system/automotive relay it can be used in a wide variety of 12V DC applications.
-
Easy Relay 240V Mains Relay (230V AC 50/60Hz Coil)
The Easy Relay 240 is designed for use in interfacing general mains voltage to lower voltage applications. The relay is of a compact power type and has two sets of silver alloy contacts, capable of switching 8A each.
-
Easy Relay 240V Mains Relay (230V AC 50/60Hz Coil) in White or Red Single Gang Box
The Easy Relay 240 Gang Plate is designed for use in interfacing general mains voltage to lower voltage applications and fits any standard single gang box. The relay is of a compact power type and has two sets of silver alloy contacts, capable of switching 8A each.
-
Easy Relay 24V Fire Panel Relay (24V DC Coil)
The Easy Relay 24 is a fire systems relay with a 24V coil intended to be used in an array of 24V DC applications such as fire system interfacing.
-
Easy Relay 24V Fire Panel Relay (24V DC Coil) in White or Red Single Gang Box
The Easy Relay 24 Single Gang Form Factor is a relay with a 24V coil that's intended to be used in an array of 24V DC applications such as fire system interfacing. It fits any standard single gang box.