Fire Alarms
Showing 1705–1728 of 2000 results
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki Installation Kit for YBN-UA / YBO-UA(WHT) (YYA-A)
- For use with YBN-UA Recess Mounting Adaptor.
-
Hochiki Manual Call Point Key (Pack of 10)
- Comes in Pack of 10 Pcs
- Key for Hochiki Call Points
-
Hochiki PL-2 Legacy Device Programming Lead Programming Lead (Jack Plug to Croc Clip)
- Allows Hochiki TCH-B200 to program legacy ESP devices.
-
Hochiki PL-3 Additional Programming Lead 3 Way Connection
- For use with Hochiki devices with square connector
- Allows connection of TCH-B200 programmer
-
Hochiki Recess Base Adaptor (required YYA-A)
- Allows base and analogue sensor or conventional detector to be flush mounted.
- Supplied with fixing brackets.
- Colour-matched to existing ivory and white sensor/detector ranges.
- Sturdy construction, easy to install.
- Suitable for a maximum ceiling thickness of 30mm.
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SI/CAP2 Base Sounder or Isolator Cover
- Protects wiring terminals on isolator bases and base sounders
- Easy to fit
- Available in Ivory or White
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
Howler Site Alert RF Heat Detector
Key Features
- Simple to configure and re-configure using dip switches
- Powered using easily sourced, low cost alkaling batteries
- Disconnection and battery status reflected by the site alert RF master unit
- Radio linked via the master unit to manual call points
- Can link to 31 units
- Radio frequency with 868 Mhz class 1 receiver
- Battery Operated - no mains power required
- Weatherproof design
-
Howler Site Alert RF Wireless Site Alarm
- Wireless Linking - Up to 30 units can be linked – no trailing wires
- Weatherproof - Push on/push off switch operation
- Loud - 100dB at 1 metre.
-
ICAM IAS / ILS Coarse Filter Replacement Filter Element, Pack of 10
- Replacement coarse filter for ICAM IAS or ILA units.
- Sold in packs of 10.
- Available in Black or White.
-
ICAM IAS / ILS Fine Filter Replacement Element, Pack of 10
- Replacement fine filter for ICAM IAS or ILA units.
- Sold in packs of 10.
-
ICAM ILS Dual Channel Air-Sampling Smoke Detector
- Dual channel smoke detection
- Laser air-sampling smoke detection
- Up to 18 holes per channel (Class C)
-
Identifire 24 or 12V Auxiliary Relay
- Flush or surfaced mounted options Mains voltage switching capability.
- 4 x 20 mm knockouts for surface and glanded cable entry.
- Terminals to allow daisy chaining of multiple units.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltages.
- Bright LED indicating unit activation.
- Consistent look and feel to all other Identifire products.
-
Identifire TriTone Conventional Sounder
- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
-
Identifire Wide Voltage Relay
- Wide Voltage range for multipurpose use.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltage.
- Terminals to allow daisy-chaining of multiple units.
- Flush or surface mounted options.
-
Intelligent Auto-Aligning Beam Detector
- Loop Powered and compatible with XP95, Discovery and CoreProtocol
- Incorporates a bi directional short-circuit isolator
- Automatic drift compensation
- Automatic reset
- Ground level Controller
- Automatic alignment compensation for building movement
- Laser assisted alignment for quick installation
- Allows for 2 detector heads per controller
- Up to 100m range
- Pre-alarm threshold
- EN 54-12 and EN 54-17 certified