Fire Alarms
Showing 1657–1680 of 2001 results
-
Fyreye Relay Base
The Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent ES Detect Conventional Heat Detector
- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Obscuration Test Card Kit For Beam Detector
- Manufacturer: Gent by Honeywell
- Obscuration Test Card Kit
- For Use With Beam Detectors
-
Gent S4-34760 Duct Smoke Sensor Housing with Sensor Base & 0.6m Tube
- Direction of flow indicated by housing.
- Single sampling tube.
- Compatible with S-Quad Sensors.
- Sampling tubes available in three lengths.
- Mounting bracket available.
- Remote LED can be installed via S-Quad monitor output.
- Air Duct uses Venturi process.
- Fully integrated into Vigilon loop.
-
Gent VS-KEY Spare Door Key for Vigilon & Compact Panels
- Spare door key for Gent Vigilon & Compact panels.
- Available individually or in packs of 10.
-
Gent XENS-SPARES Spares Pack For Xenex Panels
- Spare pack for Gent Xenex panels.
- Includes EOLs, battery link, screws and fuses.
-
Gent: Call Point Test Key – Pack of 10
Key Features
- Gent - Call Point Test Key - 14112-10 (Pack of 10)
- This is a replacement Test Key for Gent Manual Call Points.
-
GeoFire Weatherproof Door Holder
- Robust steel construction
- 1200N holding force
- Sealed against water ingress
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
-
Haes 134 Access Control Keys, Sold In Pairs
- Access control keys for Haes control panel.
- Sold in pairs.
-
Haes 4 Way Sounder Circuit Extension Card
- Four monitored sounder circuits
- Compatible with existing sounder circuits
- Includes fault monitoring relay
-
Haes 8 Way Output Card For Conventional Panels
- 8 x switched -ve outputs
- 8 x volt free changeover relay outputs plus 8 x switch -ve outputs
- Common or zonal operation
-
-
Haes BRISOL-R Boxed Isolate Relay
- 8 amp double pole relay.
- Contacts rated at 250v ac.
- Isolate key switch.
- Isolated LED indicator.
- Option to use key switch to energise the relay.
-
Haes BRLDA Lockdown Alert Alarm Pulsing Relay
- Provides pulsing or continuous alert of the impending lockdown of a building.
- 8 amp double pole relay.
- Use with existing re control panel.
- Key switch activation.
- Alarm status LED indicator.
- ON & OFF pulsing times independantly programmable up to 15 seconds for truly customised ringing pattern.
- Suitable for surface or flush fitting.
-
-
Haes Excel-EN Network Card
- Network up to 8 control panels
- Add up to 8 repeater panels to the network
- Card also includes 6 programmable switch -ve outputs
-
Haes Fire Alarm Panel 107 Spare Barrel Keys (Pair)
Spare 107 Key for Haes Fire Alarm Panel Keyswitch