Standard
Showing 551–600 of 1874 results
-
Aspirator For VESDA-E Aspiration Detectors
- Replacement aspirator for VESDA-E aspiration detectors.
- Compatible with the VEP, VES, VEU and VEA ASDs.
-
Assembly Point Sign A
Fire exit signs locate and identify means of escape. All our fire exit signs are designed to comply with the UK EC legislation.
-
Assembly Point Sign B
Fire exit signs locate and identify means of escape. All our fire exit signs are designed to comply with the UK EC legislation.
-
Assembly Point Sign C
Fire exit signs locate and identify means of escape. All our fire exit signs are designed to comply with the UK EC legislation.
-
DPL Wireless Disabled Toilet Alarm Kit
- DDA compliant wireless toilet alarm system with no wiring required
- Simple 2-screw installation with flexible positioning options
- Available in Kit 1 (multi-pull) and Kit 2 (single-pull with reset point) configurations
-
Assist Call ViAC-BAT-2 Standalone Battery Backup for ViAC-PSU
- Assist Call battery backup for ViAC-PSU.
- Brushed stainless steel finish.
-
Back Box for Fireray One
- Surface mount back box for the Fireray One beam detector.
- Includes mounting holes for the 1100-000 protective wire cage.
-
Baffles For IAS Aspiration Detector
- Baffles for IAS aspiration detector.
- Version available to suit most point detectors.
-
Banshee Excel BS Conventional Base Sounder
- Slimmest profile in the industry
- Low current consumption
- Available in white or ivory to match to detectors
-
-
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
-
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
-
Base for Intrinsically Safe Flame Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Base for Intrinsically Safe Smoke Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Basement -1 Photoluminescent Floor Identification Sign
- Basement -1 floor sign.
- 100x300mm
- Photoluminescent rigid PCV material.
-
Basic Fire Safety Online Video Training (Single User License)
- Video based online training
- Institute of Fire Engineers approved
- Complies with fire safety law Regulatory Reform (Fire Safety) 2005
- Reduces training costs
- Multiple choice questions
- Automatic Certification
-
Battery Conversion Kit for Fike TwinflexPro2 Panel
- Upgrades TwinflexPro2 panels to support a pair 7ah batteries.
- Clips onto existing panel.
-
-
Infinity ID2 Manual Call Point
- Manual call point for the Infinity ID2 system
- Indoor or outdoor (IP67) version available
- Visible warning flag confirms activation
-
Black, Brass or Chome Bezel for Milan 15W Circular Emergency LED Lumiaire
- Black, Brass or Chrome bezel for Milan emergency fixture.
-
Fyreye MKII Addressable Detector Base
- Compatible with all MKII range of detectors
- 3 different types of base available
-
Zeta CP4 Addressable Manual Call Point
- Indoor call point compatible with Zeta addressable panels
- Supplied with backbox for surface mount installations (optional flush mount bezel available)
- Very high visibility of the alarm condition
-
Bracket for 2kg CO2 Fire Extinguisher
'L' shaped wall bracket for 2kg CO2 Fire Extinguisher
-
Fyreye MKII Sandwich Sounder & Flasher Base
- Sandwich design between base and detector
- 16 selectable international alarm tones
- Individual or group triggering capability
-
Xtratone MKII Addressable Sounder
- Indoor MKII addressable sounder compatible with Zeta control panels
- 102dB @ 1m sound output
- Available in Red or White
-
Bracket for 5kg CO2 Fire Extinguisher
'L' shaped bracket for 5kg CO2 Fire Extinguisher.
-
Xtratone MKII Addressable Sounder & Wall VAD
- Combined sounder and VAD in single unit
- 100dB sound output at 1 metre
- Hard or soft addressable capability
-
-
Raptor MKII Addressable Weatherproof Sounder
- IP65 weatherproof sounder
- 16 Tone patterns (site selectable)
- Available in red or white
-
Breakable Seals For STI Call Point Stoppers (Pack Of 10)
- Used with the Stopper to protect call points, push buttons and key switches.
- Adds an extra level of security, that doesn't hinder legitimate operation.
- Extremely simple and cost effective.
-
Raptor MKII Addressable Weatherproof Sounder & Beacon
- IP65 weatherproof sounder/beacon
- Flashing rate 0.33Hz - 1.5Hz
- Available in red or white
-
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec BF318 Remote LED Indicator
- Conventional remote LED from C-Tec.
- High intensity, wide-angle red LED.
- Include write-on label to add location information.
-
C-Tec BF366 24V 5A Isolatable Relay On A Plate
- Isolating keyswitch to temporarily disable outputs when testing fire alarm system.
- LED flashes and buzzer soudners when active.
- Fits onto a standard single gang back box.
-
C-Tec BF367 Auxiliary Device Isolator
- Isolate a 24V output for fire alarm panel.
- Prevent auxillary equipment such as autodiallers from activating.
- Label includes area to write on description.
-
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
-
C-TEC BS 5839-6 Hush Button
- Fully Compliant with BS 5839 Part 6
- Works with Apollo XP95/Discovery and Hochiki ESP Protocols
- Fitted by a standard 25mm Back Box
- Built in Loop Isolator
-
CAST 4-8 Way Conventional Zone Convertor
- Seamless upgrade from conventional to addressable systems
- Supports up to 8 zones with extender PCB
- No additional wiring required for installation
-
CAST Detector Base
- The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
- It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
- The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator
-
CAST Handheld Programmer
- Quick assignment of User IDs to CAST devices
- Output testing for sounders, VADs, and relays
- Battery-powered with auto shutdown feature
-
-
C-Tec CFP 8 Zone Conventional Repeater Panel
- Repeats functions of mater CFP panel (Standard Conventional or AlarmSense).
- Up to 8 repeaters per CFP master.
- Includes its own Mains power supply that requires its own standby battery supply.
-
-
C-TEC CFP Relay Output Card – 12 Relays
- Provides Reset, Fault, Aux Fire and Remote Relays
- 8 Outputs per Zone Relays
-
-
-
-
C-Tec FF502P 4 Zone Sounder Circuit Extender Kit
- Provides four extra conventional sounder circuits with open and short circuit fault monitoring.
- Compatible with most manufacturers' fire alarm control panels.
- Supplied on a double gang plate.
-
C-Tec Hi-Output XP95 Wall Sounder
Key Features
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current./li>
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP21C (Type A) rated.
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
-
C-Tec Lid for Base Sounder in White or Red
- Optional lid for C-Tec base sounders.
- Available in white or red.