Standard
Showing 1251–1300 of 1874 results
-
Identifire Wide Voltage Relay
- Wide Voltage range for multipurpose use.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltage.
- Terminals to allow daisy-chaining of multiple units.
- Flush or surface mounted options.
-
Infinity ID2 Remote LED Indicator, Ceiling Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Infinity ID2 Remote LED Indicator, Wall Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Intelligent Auto-Aligning Beam Detector
- Loop Powered and compatible with XP95, Discovery and CoreProtocol
- Incorporates a bi directional short-circuit isolator
- Automatic drift compensation
- Automatic reset
- Ground level Controller
- Automatic alignment compensation for building movement
- Laser assisted alignment for quick installation
- Allows for 2 detector heads per controller
- Up to 100m range
- Pre-alarm threshold
- EN 54-12 and EN 54-17 certified
-
Internal Printer Module Kit For Morley ZX Panels
- Internal printer kit for Morley ZX5e panel
- Provides 40 character printer output
-
Intumescent Fire and Smoke Seal
- 30 or 60 minute Fire Rated
- Self Adhesive Fitting
- Fits on Leaves or Frame
- White or Brown Colour
- 10, 15 and 20mm options
-
Intumescent for FD30 & FD60 Timber Fire Doors to suit AL900
- Fire rated for use on 30 min timber doors to EN 1634 opening inward and outward – Fire Assessment Report No WF 419607 by Warrington Fire.
- Fire rated for use on 60 min timber doors to BS 476 (Report with GE Door Manufacturer).
-
IP65 LED Emergency Exit Box (Maintained or Non-maintained)
- LED exit box
- Ultra slim design
- IP65 rated so suitable for outdoor applications
- Runs at only 3W
-
IP65 Weatherproof 24V Power Supply
- IP65 rated PSU suitable for outdoor applications.
- Optional battery charging.
- Options fault outputs.
-
IS FlashDome Intrinsically Safe Beacon
- Intrinsic safe certified beacon.
- Suitable for zones 0, 1 or 2.
- IP66 rated.
-
Isolatable Timer Relay | 24V DC with Key Switch | Adjustable Delay (0-5 Mins) | Red Boxed
- Adjustable 0-5 minute timer delay with visual LED indication
- Keyswitch isolation prevents unwanted activation during testing
- Dual trigger inputs: 24V DC or fire alarm bell circuit
-
Jalite 4658A Photoluminescent Emergency Door Release Sign
- Glow in the darm material
- 100x100mm in size
- Regid plastic material
-
Jalite 5055D Photoluminescent Fire Action Sign
- Jalite 5055D Photoluminescent Fire Action Sign.
-
Jalite 5414D Photoluminescent Fire Action Sign
- Jalite 5414D Photoluminescent Fire Action Sign.
-
Jalite Photoluminescent ‘Fire Door Keep Shut’ Sign, 80mm Disc, Pack Of 10
- "Fire Door Keep Shut" sign.
- Pack of 10.
- Printed onto photoluminescent rigid plastic maerial.
-
Jalite Photoluminescent ‘Gas Shut Off Valve’ Sign
- Photoluminescent 'Gas Shut Off Valve' sign.
- Available in 150x150 or 200x200mm.
- Choice of rigid plastic or self-adhesive.
-
Jalite Staff Fire Action Notice
Enter a brief description of your product here. This description will be displayed on product list pages.
-
JSB FX2200 2 or 4 Zone Conventional Panel
- 2 or 4 zones panels
- Flexible, high specification system
- Simple “one-shot” auto-reset user test facility
-
JSB FX2200 Conventional Fire Repeater Panel
- Flexible, High Specification System
- Simple Auto-Reset User Test Facility
- Class Change and Programmable Fire/Fault Relay
- Third Party Approved
-
KAC Call Point Cover Seal – Pack of 5
Key Features
- Call Point Cover Anti Tamper Seals
- For Use With The New Type KAC Call Points and Covers
- Pack of 5
-
-
KAC ENscape Sounder Conventional Sounder Shallow Base Only
- Conventional sounder from KAC.
- Available with low profile or deep mounting base (IP65).
- 32 tones all approved to EN54-3.
-
KAC Indoor Single Pole Keyswitch
- Indoor keyswitch with single pole relay.
- Option of 2 or 3 position keyswitch.
- Option for key to be trapper or un-trapped.
-
-
KAC Plastic Resettable Element For Call Points
- Compatible with the New Type KAC Call Points (See related products)
- Enables the call point to be reset after alarm is activated
- Yellow indicator on plastic element indicates to user that the call point has been activated.
-
KAC SC087 Spare Keys for 3 Position Keyswitch, Pack of 6
- Replacment keys for KAC 3 position keyswitches.
- Sold in packs of 6.
-
KAC Spare Call Point Glass, Pack of 5
Key Features
- This glass is suitable for use in the following type Call Points:
- KAC
- Apollo
- Morely
- Fulleon
- Ziton
- Notifier
- Electro Detectors
- EMS
- System Sensor
- Nittan
- Dimensions (HxWxD): 40mm x 71mm x 1.5mm
-
Keep Locked Shut Sign
Mandatory signs are to advise and inform visitors and staff in what they must do insure a safer environment for themselves and others around them.
-
Kentec Addressable Matrix Mimic Panel For Syncro AS or Taktis
- Up to 504 LED’s can be controlled from any Taktis Fire or Syncro AS panel.
- Full colour printing.
- Available in a range of standard enclosures to suit any applications.
- Bespoke sized units can be made upon request.
- Choice of Red, Green or Yellow LED’s.
- Available with or without controls.
-
Kentec B1828 Replacement 2 Position Controls Enabled Keyswitch
- Kentec 2 position controls enabled keyswitch.
- Replacment for Syncro and Sigma range of panels.
-
Kentec Battery Box – Sigma CP/Syncro AS Styling
Key Features
- Fully welded, all steel construction
- Tough epoxy powder coated finish
- Key lockable
- Wide range of styles and sizes
- Up to 65Ah batteries can be fitted
- Fully enclosed and robust construction
-
Kentec Sigma XT Ancillary PCB
- 24V DC powered boxed ancillary board
- Two-wire serial RS485 connection with additional power cores
- Volt-free relay outputs for remote subsystem control
-
Kentec B3225 | Replacement Cabinet Lock | Fits Sigma CP, XT & Syncro AS Enclosures
- Compatible with Kentec panels ending M1, M2, L2, H2, F2, M3, H3, D3, M4
- Complete barrel and key assembly set with model 801 key
- Mini camlock design for Kentec and Syncro panel cabinets
-
Kentec Conventional Panel Enable Key
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Economy Software Download Lead
- Universal compatibility with Syncro, Solo and Solex panels
- Essential for panel programming and commissioning
- Works with Loop Explorer configuration software
-
Kentec Fire Alarm Documents Box
- Matches design & colour scheme for standard Sigma CP/XT and Syncro AS control panel ranges.
- Easy to install.
- Key Lockable.
- Designed for versatility.
- Choice of small or large capacity enclosure.
-
Kentec Fire Alarm Panel Spare Key Set
- Spare keys for control panels
- Compatible with Sigma, Taktis, Syncro
- Pack of five keys
-
Kentec K551A Syncro Loop Controller Board : Apollo Protocol
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec K768P2 Syncro AS Printer Enclosure
- Matches design & colour scheme for standard Sigma CP/XT & Syncro AS control panel ranges.
- Compatible with Syncro & Taktis fire panels.
- Easy to install.
- Front loading printer for quick and easy paper changes.
-
Kentec LCMU Line Continuity Monitoring Unit
- LCMU for Kentec Sigma panels.
- Easy to install.
- No additional wiring point.
-
Kentec Sigma CP Ancillary PCB
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Sigma CP Sav-Wire Two-Wire Fire Alarm Panel
- 1.2mm Mild Steel Construction
- Fully Certified to EN54-2
- Fully Programmable Using Simple Menu Options
- Available in 2, 4 or 8 Zones
-
Kentec Sigma CP Sounder PCB
- Two wire serial connections.
- Up to 7 sounder boards per system.
- 230V AC or 24V DC powered versions.
- Zoned, 2-stage or common alarm
- All outputs monitored for open and short circuit faults
- Individual open and short circuit fault indicators
- Fully monitored by main control panel
- Class change input facility
- Up to 8 outputs with 0.5A available from each
- Can be connected to serial bus with Ancillary boards and repeaters
- Boxed units in enclosure to match Sigma CP control panels
- Power fault input for monitoring remote power supplies
-
Kentec Sigma CP-R Conventional 2-8 Zone Repeater Panel
- Two-Wire Serial Connection
- Up to 7 Panels Per System
- Full Control Over Main Panel
- 1.2mm Mild Steel Construction
-
-
Kentec Syncro 4 Way Conventional Detection Zone Module
- 4 Monitored Detection Zone Inputs
- 2 Monitored Sounder Outputs
- Direct Replacement for Conventional Control Panel for integration in to an addressable System
-
Kentec Syncro 6 Way Sounder Extender Board
- 6 Individually Fised and Monitored Sounder Outputs
- Fault and Operated Indications
- Common Footprint to other Syncro I/O
- Compatible with Syncro AS Panels
-
Kentec Syncro 8 Way Extender Board
- 8 Volt Free Changeover Relay Contacts
- Common Footprint to Other Syncro I/O
- Compatible with Syncro AS Panels
-
Kentec Syncro AS I/O Expansion Board Enclosure with optional PSU
- Matching design & colour scheme for Kentec new style control panel range.
- Easy to install.
- Incorporates Kentec's 'Quick Fit' lid & equipment chassis.
- Front panel mounted status LED indication.
- Space for 3.2Ah batteries.
- Choice of power supplies.
-
Kentec Syncro AS Loop 2 Expansion Card
- Loop 2 Expansion Card
- Available in Apollo, AV, and Hochiki Protocol