Standard
Showing 1551–1600 of 1874 results
-
Series 65 Conventional Duct Smoke Detector
- For use with Series 65 or Orbis detectors
- Operates in air speeds of 0.5m/s to 20m/s
- Transparent cover to view detector head LED
- Integral smoke test port
- Volt-free contacts
-
Sigma CP Sounder Controller Unit
- Two wire serial connection
- 230V AC or 24V DC powered versions
- All outputs monitored for open and short circuit faults
- Fully monitored by main control panel
- Up to 8 outputs with 1A available from each
- Boxed units in enclosure to match Sigma CP control panels
- Up to 7 sounder boards per system
- Zoned, 2-stage or common alarm
- Individual open and short circuit fault indicators
- Class change input facility
- Can be connected to serial bus with Ancillary boards and repeaters
- Power fault input for monitoring remote power supplies
-
SigTEL Disable Refuge System 8 Line Expansion Unit
- Can be connected to an ECU-4 or ECU-8 master controller to increase its line capacity to 12 or 16 lines respectively
- Does not require a separate mains supply or batteries
-
SigTEL Disable Refuge System Anti-Tamper Stainless Steel Enclosure
- An attractive flush-mounting tamper-resistant cabinet for housing an ECU-4 or ECU-8 master controller
- Helps ensure controllers remain operational at all times by reducing the risk of vandalism
-
SigTEL Line Tester
- Allows cable faults to be checked and cleared prior to equipment connection
- Includes all of the test cables and connectors you need
-
SigTEL Programming Configurator
- Facilitates quick and easy editing of outstation/extension names via a Windows-compatible PC
- Includes a software CD, configurator and mini USB to master controller connection lead
-
SigTEL Type A Fire Telephone Outstation
- Type A (telephone-style) outstations for SigTEL system
- Optional flush mount bezel
-
SigTEL Type B Green Refuge Outstation
- Type B (handsfree intercom-style) outstations for SigTEL system
- Flush and Surface versions available
- Constructed from tough, durable green steel
-
SigTEL Type B Stainless Steel Refuge Outstation
- Type B (handsfree intercom-style) outstations for SigTEL system
- Flush and Surface versions available
- Constructed from high-quality brushed stainless steel
-
SigTEL Weather Resistant Enclosure ForType B Outstations
- An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
- Includes a handle and mounting plate.
-
-
-
Single Fire Extinguisher Stand
- Red sign fire extinguisher stand.
- 2 piece construction to reduce packagin size.
-
-
Single or Double Metal Extinguisher Stand in Red or Chrome
- Universal stands for either 1 or 2 extinguishers (1-9 kg/litre & 2kg CO2)
- Manufactured from mild steel (25mm tube)
- Available in Red or Chrome finish
-
Single or Double Moulded Extinguisher Stand With Recessed Base & Skirting Board Cut-out
- Compact design.
- Holds 1 x 6/9 l/kg extinguisgher or 1 x 6 l/kg & 1 x 2kg CO2 depending on version.
- Conveniently moulded ID sign position.
- Robust rotationally moulded design.
- Manufactures in high impact and chemical resistant plastic.
- Fully recyclable.
- Ideal for shop and office locations.
- Fully free-standing design with skirting board recess.
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
Single Universal Extinguisher Stand in Red or Grey
- Universal fire point suitable for 2kg CO2 up to 9kg/9ltr extinguishers.
- “Multi-disc” system provides stability for different sized cylinders.
- Draws attention to the location of fire extinguishers.
- Constructed from tough and durable moulded plastic.
- Available in red or grey.
- Manufactured in UK.
-
Single Zone Call Controller With Relay & Optional Onboard Battery Backup
- A single zone call controller c/w a 12V 140mA PSU.
- Optional standby battery.
- Onboard relay.
- Compatible with C-TEC's entire range of 800 Series Call System components.
- Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
- Includes a volume adjustable sounder and a link-selectable Call Accept/Reset button.
-
Single Zone Call Controller With Stainless Steel Enclosure
- A single zone call controller c/w a 12V 250mA PSU and link-selectable Mute/Reset button.
- Fully compatible with C-TEC's entire range of 800 Series Call System components.
- Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
- Stainless steel enclosure.
-
-
Small Cartridge Extinguisher Service Collar, Individual
- Service collar for small cartridge extinguishers.
- Sold individually.
- Available in red, green, blue, orange, yellow, white or grey.
-
SmartCell Call Point Breakable Tag, Pack of 50
- Pack of 50 breakable tags for SmartCell wireless call points
- Designed to work seamlessly with SmartCell wireless systems
- Compact physical dimensions of 8 x 51.5 x 0.5 mm (W x H x D) for easy installation and use
-
SmartCell Call Point Key, Pack of 10
Enter a brief description of your prod- Pack of 10 call point keys for SmartCell wireless systems
- Designed to work seamlessly with SmartCell wireless call points
- Compact dimensions of 22 x 60 x 7 mm (W x H x D) for easy handling and storage
-
SmartCell Panel Communications Module
- Provides remote connection option for SMS/email updates
- For internal connection within the SmartCell control panel
- Includes GSM antenna and SIM card
- Requires SC-94-0001-99 SmartCell remote services annual contract
-
SmartCell Wireless Dual Smoke & Heat Detector Only
- Flexible detection; smoke and/or heat
- Unique design
- Inbuilt locking mechanism
-
SmartCell Wireless Dual Smoke & Heat Detector with Sounder
- Flexible detection; smoke and/or heat
- Integral sounder
- 32 tones
-
SmartCell Wireless Dual Smoke & Heat Detector with Sounder & Beacon VAD
- Flexible detection; smoke and/or heat
- Integral sounder (32 tones) & beacon VAD (part 23)
- Unique design
- Inbuilt locking mechanism
-
SmartCell Wireless Manual Call Point
- Quick and easy to install
- Compact enclosure
- Includes protective transparent cover
-
SmartCell Wireless Sounder in Red or White
- 32 sounder tones
- 95 dB(A) output
- High or low volume adjustment
- Available in Red or White enclosure
-
SmartCell Wireless Sounder with Beacon VAD
- Quick and easy to install
- 32 sounder tones
- Part 23 ceiling or wall VAD
- Unique design
- Inbuilt locking mechanism
-
SmartCell Wireless Dual Input/Output Interface
- Full wireless communication with panel
- Two resistor monitored inputs
- Two voltage free outputs
- For connection to remote fire devices
-
SmartCell Wireless Door Holder in Black or White
- Combines industry-proven mechanics with SmartCell wireless technology
- Quick and easy installation with individual addressing at the SmartCell Control Panel
- Fully controlled by the fire system, operating on the 868 MHz European harmonized frequency band
-
SmartCell WZM Wireless Zone Monitor
- Supports up to 16 SmartCell wireless fire devices
- Addressable & conventional control panel connections
- Mains powered or 24V DC versions available
-
SmartCell 6V, 4Ah Sealed Lead Acid Battery for SmartCell Control Panel
- Specifically designed for use with the SmartCell control panel
- 6V voltage and 4Ah capacity
- Ensures uninterrupted power supply for the control panel
-
-
SmartConnect Mulit-Loop RS232 Printer Module
- Designed to EN54 requirements
- Use to interface to RS232 devices
- 5V aux output (ofr use with panel printer only)
- Extensive front unit indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop 6 Way Conventional Zone Monitor
- Designed to EN54 Part 2
- 6 x Conventional Zones
- Each zone is monitored for open & short circuit
- Extensive front unit status indications (see table below)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Each zone input can be configured as either Alarm or Technical Alarm
-
SmartConnect Multi-Loop Alarm Circuit Module
- Can be configured as an alarm output or a power output
- 2 x output circuit (500mA each)
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Power limited
-
SmartConnect Multi-Loop Card Module
- Designed to EN54 requirements
- Supports up to 250 addresses
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit status indications
- Time saving AUTO-LEARN facility
- 450mA max load (at 20 ohms loop resistance)
- Double address detection
-
SmartConnect Multi-Loop Gas Detection Module
- Each SCM-4-20 module has 2 available circuits
- Each circuit will allow a single connection of a 4-20mA device
- Extensive front unit status indications
- Compatible with any Smart Connect Multiloop Panel
- Quick Connect Din Rail Mount
-
SmartConnect Multi-Loop Multi-Input Module
- Designed to EN54 Part 2
- Each input is monitored for open & short circuits
- Extensive front unit status indications (See Datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
- Each input can be configured as either Alarm or Supervisory
-
SmartConnect Multi-Loop Multi-Relay Output Module
- Designed to EN54 Part 2
- 3 x Form C relay outputs
- Each relay can be programmed to activate on Alarm, Technical Alarm, or Fault.
- Extensive front unit indications (see datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop Repeater
- 4.3” colour touch screen display
- 8032 event log entries
- Up to 64 panel peer-to-peer network
- 13 status LED indicators
- 5 function button controls
- Fully functioning repeater provides the ability to program a networked Smart Multi-loop control panel from the front screen
- Accommodates wiring lengths up to 1000 metres from the control panel for added design and install flexibility
- Network can we wired in either a bus or a ring topology if a redundant path is required
- 8 password protected access accounts available (1 admin level, 7 user level)
- Uncluttered and intuitive interface allows alarms, tech alarms, and fault events to be easily viewed
- Low power consumption
- Small enclosure
-
SmartConnect Multi-Loop RS485 Network Module
- Designed to EN54 requirements
- Peer-to-peer networking
- Comprehensive cross network cause & effects
- Remote programming over the network
- The network can be configured with either a ring or bus topology
- Extensive front unit status indications (See datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)
-
SmartConnect Multi-Loop TCP/IP Module
- Designed to EN54 requirements
- TCP-IP output via RJ45
- Zeta Remote monitoring via a desktop PC or smartphone via the cloud
- Remote control via the cloud
- Responsive web interface
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit indications
- Quick and simple to install
-
SmartConnect Multi-Loop, 10 Module Addressable Panel
- Modular construction allows a panel to be specified using just the required modules
- Up to 6 loop card modules
- 4.3” colour touch screen display
- Capacity for up to 10 intelligent modules
- Full system redundancy
-
Fike CIE-A-200 Single Loop Addressable Fire Alarm Panel
- This product is obsolete and has been replaced by Fike CIE-A-400 2 Loop Addressable Fire Alarm Panel
- 1 loop Fike addressable panel
- Approved to EN54 Part 2 & 4
- 32 supported zones
-
Advanced TouchControl | 10″ Touchscreen Remote Control Terminal | Active Maps & Zone Plans
- 10" high-resolution touchscreen with interactive site maps and zone plans capability
- Functions as fire panel and network node on standard or fault tolerant networks
- Dual monitored power supply inputs for redundant feeds with PSE fault monitoring
-
Kentec Syncro View Local LCD Repeater Panel
- Large 240 x 64 pixel graphic LCD display with full Syncro panel replication
- Connect up to 15 repeaters per panel via simple two-wire RS485 connection
- Available with 24V DC or 230V AC power options and enable control keyswitch