Standard
Filter Products
[wcpf_filter_notes filter-id="65037"]
[wcpf_filters id="65037"]
Showing 1601–1650 of 1874 results
-

Soft Pack Document Holder
- Incorporates eyelet hanging point for secure fixing.
- Roomy A4 capacity.
- Screen printed front panel for easy identification.
-

SoHo Circular 2D LED Luminaire With Optional Emergency
- 3 hour emergency fitting
- True 2D 28W replacement
- Optional microwave presence detector
- High lumen output of 2100lm
£44.38 Select options This product has multiple variants. The options may be chosen on the product page -

Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
£28.50 Select options This product has multiple variants. The options may be chosen on the product page -

Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
£36.27 Select options This product has multiple variants. The options may be chosen on the product page -

Solo 100 Fiberglass 4 Section Telescopic Pole – 4.5 Metres
- Four sections
- Extends from 1.26m to 4.5m
- Enables access to detectors fitted up to 6m / 20'
- Accepts three Solo 101 to reach 9m / 30'
-

Solo 101 Fibreglass Extension Pole – 1.13 Metres
- Single section 1.13m / 3.5’
- Enables access to detectors fitted up to 2.5m
- Connects to Solo 100, Solo 108 or additional Solo 101s for greater heights
-

Solo 108 Fibreglass 2 Section Telescopic Pole 2.5 Metres
- Twin section
- Extends from 1.26m to 2.5m / 8’
- Enables access to detectors fitted up to 4m+ / 13’+
- Accepts additional Solo 101’s for greater heights
-

Solo 110 Urban 1.75m 4 Section Telescopic Pole
- Extends to 1.75 metres to provide maximum reach of 3 metres.
- Can be used with up to 3 Solo 111 extension poles.
-

-

Solo 461 Cordless Heat Detector Test Kit
- Battery powered
- No cables or cords – completely portable
- Directs heat straight at detector
- Suits fixed temperature and rate of rise and combination detectors up to 194°F / 90°C
- Set detectors into alarm within seconds
- Rechargeable – even from vehicle
- Safe for use at low level or at heights
-

Solo 460 Cordless Heat Detector Heat Unit Only
Solo 460 Cordless Heat Detector Heat Unit Only
-

Solo 200 Universal Detector Removal Tool
- Universal design - suits most detectors.
- Suitable for use on angled ceilings.
- Lightweight.
- Compatible with Solo access poles.
- Lifetime warranty.
-

Solo 240V or 110V Mains Heat Detector Tester
- Suits fixed temperature and rate of rise and combination detectors up to 194°F / 90°C.
- Set detectors into alarm within seconds.
- Safe for use at low level or at heights.
- Rapid activation times.
- Lightweight and simple to use.
- Designed for use at height and at angles.
- Supplied with 5m / 16ft cable (additional 5m / 16ft cable available).
£479.57 Select options This product has multiple variants. The options may be chosen on the product page -

Testifire 1001 Smoke/Heat Kit
- This product is obsolete and has been replaced by Testifire XTR2 Connected Smoke & Heat Detector Test Kit
- Fast Dual Testing
- Less Equipment to carry around
- Fully compatible with solo poles
- No Pressurised cans of gass needed
-

Solo 370 Lithium Ion Battery Pack For Solo 365 Smoke Test Head
- Rechargable battery for Solo 365 smoke test head.
- USB connection.
- Fast charge time – 120 minutes.
Select options This product has multiple variants. The options may be chosen on the product page -

Solo 371 Smoke Generator For Solo 365 Smoke Test Head
- Field replaceable part.
- Easily fits within Solo 365.
-

Solo 372 ASD Adaptor For Solo 365 Smoke Test Head
- Adaptor fitted to Solo 365 in place of the standard clear cup.
-

Solo 425 5m Additional Extension Cable Assembly
5m Additional Extension Cable Assembly for use with the SOLO-423 & SOLO-424 Heat Detectors.
-

Solo 602 Pole Bag
- Protective carry bag for the Solo range of access poles
- Store 1 x Solo100 or 1 x Solo108 or 3 x Solo101.
-

Solo 610 Protective Carrying / Storage Bag
Storage bag designed to fit all product range. Seperate pole bag included.
-

Solo 611 Protective Urban Backpack includes Pole Bag
- Velcro ajustable compartments
- Fits one Solo or Testifire head unit & necessary accessories
- Includes compartment for laptop or tablet
- Features drinks bottle holder
- Padded back and adjustable straps allow for ultimate fit and comfort
-

Solo 612 Urban Pole Bag
- Storage pole bag for Urban range of Solo poles
- Store 1 x Solo 110 or 3 x Solo 111 poles
-

Solo 726 220 / 240v Mains and Car Charger
- 220/240v mains and car charger
- Compatable with Solo-460 mains heat detector tester
-

Solo 727 Mains & Car Charger for Solo 770 & 760 Batteries
- Fast charges in less than 90 minutes.
- Can be used via mains power or in-vehicle outlet.
- Compatible with Solo 770 & 760 battery batons.
-

-

Solo 823 9m Smoke & Cordless Heat Detector Test Set
- Smoke & heat detector testing plus head removal kit
- 9m reach
- Aerosol based tester canisters
-

Solo 365 Urban Smoke Detector Test Kit (5 Metres)
- Compact Solo 365 smoke detector test kit
- Convinient - Less disruption when testing, quicker movement between & around sites
- Compact - All your test kit, including our new short poles, in a sleek compact backpack
- Practical - Lightweight design allows fast and ef cient testing up to 5 metres
-

Solo C6 Hand-held Carbon Monoxide Detector Tester Aerosol
- World's first UL classified CO detector tester
- Hand-held use with included applicator straw
- Genuine non-flammable CO gas for accurate testing
-

Solo Heat Detector Tester Baffle for Fike Detectors
- Baffle for testing Fike Detectors Effectively with SOLO Heat Detector Testers
-

Sonos Conventional Sounder & LED Beacon
- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
Select options This product has multiple variants. The options may be chosen on the product page -

Sonos Conventional Sounder in Red or White
- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
Select options This product has multiple variants. The options may be chosen on the product page -

Sonos High Power 5J Xenon Beacon
- High output 5J xenon beacon
- 10-60V DC or 110/230V AC
- Simple ‘First Fix’ installation
£26.16 Select options This product has multiple variants. The options may be chosen on the product page -

Sonos LED Beacon
- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
Select options This product has multiple variants. The options may be chosen on the product page -

Sonos Open Area Beacon with Isolator
- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
Select options This product has multiple variants. The options may be chosen on the product page -

Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
Select options This product has multiple variants. The options may be chosen on the product page -

Sonos Pulse Wall Mounted VAD
- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
Select options This product has multiple variants. The options may be chosen on the product page -

Sonos Pulse Wall Mounted VAD Beacon with Sounder
- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
Select options This product has multiple variants. The options may be chosen on the product page -

Soteria SA5000-400 Heat Detector
- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-

Apollo Soteria Dimension Optical Smoke Detector
- Low profile design
- Utilises digital CoreProtocol communications
- Compatible with Discovery and XP95 systems*
- Integrated switchable isolator as standard
-

Soteria SA5000-600 Optical Smoke Detector
- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-

Sounder Active EOL For Advanced MxPro 5
- For use with EN54-13 Compliance.
- Supports device removal.
- For use with all MxPro 5 series control panels.
-

Spare Ceramic Tube for the Redlam Panic Bolt, Pack of 20
- Replacement ceramic tubes
- Ceramtubes™ are designed to produce no sharp edges when smashed
- Ceramtube™ Dimensions: L127mm x D17mm
- Available in packs of 20 or individually
-

Spare Controls Enable Key for Fike TwinflexPro & TwinflexPro 2 Panels, Single Key
- Spare controls enabled key for Fike TwinflexPro & TwinflexPro2 panels.
- Sold individually.
-

Spare Fob/Card for APX19 Standalone Mifare Proximity Reader
Enter a brief description of your product here. This description will be displayed on product list pages.
Select options This product has multiple variants. The options may be chosen on the product page -

Spare Glass for Eaton Fulleon CX Manual Call Point, Pack of 10
- Spare glass for CX manual call points.
- Sold in pack of 10.
-

Spare Glass For MR20640 Break Glass Key Box
Enter a brief description of your product here. This description will be displayed on product list pages.
-

-

Spec Connected Wireless Gateway
- Enables remote real time monitoring - without requiring access to properties for complete tenant and asset protection
- Compatible with all FireAngel Specification devices - use alongside a network of up to 50 mains and battery FireAngel Specification devices.
- Simple setup and configuration - in seconds grant access to service and maintenance teams, family or friends
-

Stainless Steel Cable Tie Tensioner, Black Sideways Style
- Manual tensioning and cutting tool for stainless steel ties.
- Suitable for steel ties up to 7.9mm wide and 0.3mm thick.
-
Select options This product has multiple variants. The options may be chosen on the product page