Standard
Showing 301–350 of 1874 results
-
140 or 160m Range Extension Kit For Firebeam Xtra
- Range extension kit for the Firebeam Xtra.
- Available with eitehr 140 or 160m range.
-
2 Loop Card for Taktis Vision EMS FireCell Panel
- Expand the Taktis 2 Loop EMS FireCell Control Panel with an additional 2 loops.
-
2-Way Programmable Relay Card For Advanced MxPro 5
- Each output individually programmable.
- Cost effective against ancillary hardware.
- Each output 30V AC/DC, 1 Amp rating.
-
-
C-Tec 24V 250mA Door Release Power Supply Unit
- Two model variants: basic integration (BF375P) and integrated detector circuit (BF375PE)
- Powers up to 5 electromagnetic door retainers at 250mA output
- Compact double gang mounting with comprehensive trigger inputs
-
3 Prism Long Range Kit For Fireray Reflective Infrared Beam Detectors
- Additional 3 prism kit to extend range of Fireray One to 120m.
-
9kg Dry Powder Fire Extinguisher
- Type : 9kg Dry Powder Fire Extinguisher
- Fire Rating : 43A / 233B
- CE Certified Fire Extinguisher : Yes
- Kitemarked Fire Extinguisher : Yes
- Wall Mount Included : Yes
-
ABC Powder Fire Extinguisher Sign
ABC powder extinguisher sign to identify your fire extinguisher. All our fire equipment signs are designed to comply with the UKEC legislation
-
Hochiki ACD-EN Addressable Multi-Sensor | Smoke, Heat & CO Detector
- 24 EN54-approved operational modes combining smoke, heat, CO and COHb detection
- SMART algorithm for reduced false alarms with automatic environmental adaptation
- Up to 10-year CO cell life with full monitoring and end-of-life warnings
-
Hochiki ESP Addressable Weatherproof Heat Detector
- IP67 rated for external use
- Dual heat detection elements (fixed temperature and rate of rise)
- ESP analogue addressable protocol
-
-
ESP FIREbeam XTRA Analogue Addressable Beam Smoke Detector
- 7-70 m standard detection range
- Extensions kits available to enhance detection range up to 160m
- Fully compatible with the Hochiki ESP analogue addressable protocol
-
ACT 1345 Sound Level Meter
- Wide dynamic range from 30 to 130dB
- IEC651 Type 2 and ANSI S1.4 Type 2 compliant
- A and C frequency weightings
-
ACT 1414 24V Spike Suppressor
- Protects fire alarm system from induced AC and nearby lightning
- Decouples induced AC from every alarm cable connected to the control panel
- Clamps the 24VDC supply against spikes
-
ACT 230MSF 230V EMI RFI Mains Filter
- Prevents false alarms from EMI/RFI interference
- Lightning protection for security equipment
- 3 amp maximum current rating
-
ACT 2323 230V Mainspike Suppressor
- Provides up to 4,500 Amp continuous spike protection across live, neutral and Earth.
- Protects against nearby lightning causing false alarms and system malfunctions.
- Protects all security and fire alarm panels, CCTV cameras, access control equipment and security lighting.
-
-
ACT 415B Premium Multimeters Test Leads
- Premium test leads to suit most multimeters.
- Replacement leads for ACT/6000.
- Moulded PVC constuction with highly flexible, tangle resistant silicone cable.
- 4mm right angle plugs.
- Insulated test probes - gold plated.
- CAT IV rated.
- Overall length 1.2m.
-
ACT 418 Professional Multimeters Test Leads
- Professional test leads to suit any multimeter.
- Suitable for for ACT/6000.
- Constructed of highly flexible silicone cable.
- Retractable 4mm Plugs.
- Fully Insulated Probes with Attachable Crock-Clips.
- Overall length 1.2m.
-
ACT 531 Light Level Meter
- Simple one hand operation.
- Valox housing to withstand accidental drops.
- Backlit LCD display.
-
ACT 6000 Alarm Engineers Autoranging Digital Multimeter
- Fully autoranging.
- Both AC and DC voltage measurement.
- Three ranges are provided for current measurement of either AC or DC current.
- Simple operation.
-
ACT 612 6V or 12V Intelligent Battery Tester
- Test SLA, GEL & FLOODED.
- For 6V & 12V battery models.
- Simple Operation.
- DC Voltage and Ah Capacity Results.
- When to Recharge or Replace.
-
ACT Battery Tested Labels, Roll of 250
- Each roll contains 250 labels
- Insertions for Temperature, Volts, Ah Readings, User Initials and Date Tested
-
ACT CPS3 Fire Alarm Control Panel Suppression Kit
- Protects metal fire alarm control panels from EMI, RFI and nearby lightning.
- Recommended to fit this kit as standard on all take-overs.
-
Infinity 2, 4 or 8 Zone Conventional Fire Alarm Kit
- Conventional fire alarm kit with 2, 4 or 8 zone panel
- Kit can be expanded with additional devices
- Additional saving by buying in kit format
-
C-Tec CFP 2, 4 or 8 Zone Conventional Fire Panel
- 2, 4 or 8 zone circuits
- Economy version available
- Four conventional sounder circuits
-
Infinity8 Conventional Fire Alarm Panel
- Optional 24V aux supply (4-8 zone versions only)
- Optional non-latching zone
- Fault relay can be configured as 2nd fire relay
-
Kentec Sigma CP Conventional 2, 4 or 8 Zone Panel
- Fully certified to BS EN54-2 and BS EN54-4
- 2, 4 or 8 version zones
- Surface and Flush Mounting Options
-
Eaton Flexi BiWire or Conventional Panel
- Configure zone wiring to work as either a conventional or two-wire system
- Allows the connection of an existing conventional system to a BiWire system
- Compatible with two-wire and conventional EN 54-23 certi ed visual alarm devices (VADs)
-
Infinity ID2 Repeater Panel
- Can be programmed to act as fully functional (ability to silence/reset) or passive (shows alarm info only)
- 4 cores required from ID2 panel (2 data + 2 power)
- Can powered from 24V auxiliary PSU in the ID2 panel
-
Fike Twinflex Pro2 Repeater Panel
- Compatible with the 4 or 8 zone Twinflex Pro2 panels only
- Reports Twinflex Pro panel events to a remote location
- Capable of performing system controls (i.e. Silence Alarms, Reset, Sound Alarms & Silence Buzzer)
-
Infinity ID2 Detector With Optional Integral Sounder
- 4 types of detector available
- All available with optional integral sounder
- Remote LED output
-
Black Infinity ID2 Detector With Optional Integral Sounder
- Black plastic moulding to meet aesthetical requirements
- All available with optional integral sounder
- 4 types of detector available
-
-
Twinflex ASD Multi-Function Detector With Optional Sounder And Strobe
- Available as detector only, with sounder or with sounder/strobe
- 6 selectable modes of detection
- Inbuilt selectable end of line
-
Gent Xenex Conventional Panel
- 2, 4 or 8 zone conventional panel from Gent
- Up to 8 conventional sounder circuits
- One-man test and commissioning features
-
Twinflex ASD Detector with Optional Sounder in Black
- Twinflex ASD detector in black plastic moulding
- Available as detector only or with integral sounder
- 6 selectable modes of detection
-
AlarmSense Optical Smoke Detector
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
-
AlarmSense AlarmSense Heat Detector
- Can be used for applications where smoke detectors are unsuitable
- Two types available; fixed heat (CS) or rate-of-rise (A1R)
-
Apollo Alarmsense Integrating Optical Smoke Detector
- Responds Well to Slow Burining Smouldering Fires
- 360 Degree Visibility of LED's
- Reduces False Alarms
- Quick Simple Installation
-
Eaton BiWire Ultra 5 in 1 Detector
- DIL-Switch Mode Selection
- Non-Latching Mode for HMO Use
- 15m Optical Range
- 2 Core Wiring
-
Esento Eclipse Conventional or Save-Wire Panel
- 2 or 4 zones
- False alarm management
- Twin Wire selection
-
Haes Esento Excel Sav-Wire or Conventional Panel
- 2-12 zones
- Individually selectable Twin Wire zones
- Network up to 8 control panels
-
Apollo 55000-317 | Series 65 Optical Smoke Detector | Conventional
- Photo-electric detection for smouldering fires
- Two-wire polarity insensitive supply
- Operating range -20°C to +60°C
-
Apollo Series 65 Conventional Heat Detector
- Wide operating voltage range 9V to 33V
- Multiple temperature variants for different applications
- Dual thermistor network with rate of rise detection
-
Fyreye MKII Conventional Optical Smoke Detector
- Conventional optical smoke detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
- Conventional fixed high-temperature heat detector
- Compatible with most conventional systems
- 8 alarm indication LEDs
-
Simplicity CO Addressable Carbon Monoxide Panel
- Addressable carbon monoxide system
- 2-8 zones with a maximum of 126 devices
- Radial or Loop wiring formats (selectable on panel)
- Suitable for many applications including underground carparks
-
Simplicity CO Addressable Carbon Monoxide Detector
- IP54 rated for harsh environments
- Wide detection range 0-600 ppm
- 300m² coverage area