Shop
Showing 2101–2150 of 3067 results
-
Gent ES Detect Conventional Standard Base With or Without Diode
- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Indoor Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent Obscuration Test Card Kit For Beam Detector
- Manufacturer: Gent by Honeywell
- Obscuration Test Card Kit
- For Use With Beam Detectors
-
Gent S-Quad Addressable Detector
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
-
Gent S-Quad Addressable Detector with Sounder
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice
- Dual optical heat sensor
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice & VAD Beacon
- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S4-34760 Duct Smoke Sensor Housing with Sensor Base & 0.6m Tube
- Direction of flow indicated by housing.
- Single sampling tube.
- Compatible with S-Quad Sensors.
- Sampling tubes available in three lengths.
- Mounting bracket available.
- Remote LED can be installed via S-Quad monitor output.
- Air Duct uses Venturi process.
- Fully integrated into Vigilon loop.
-
Gent Square Replacement Glass (Pack of 10)
- For use with the "Old Style" Square Gent Call Points
- Dimensions: 68 x 62 x 2mm
- Manufacturer: Gent by Honeywell
-
Gent Vigilon Call Point Cover
Key Features
- Manufacturer: Gent by Honeywell
- Designed for use with the Gent Vigilon Call Points
- Hinged Design For Access To Call Point Element
- Made from Polycarbonate Plastic
- Helps prevent accidental & malicious alarm activations
-
Gent VS-KEY Spare Door Key for Vigilon & Compact Panels
- Spare door key for Gent Vigilon & Compact panels.
- Available individually or in packs of 10.
-
Gent Weatherproof Conventional Manual Call Point
- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
Gent Xenex 13271-08LB 8 Zone Repeater Panel
- 8 zone repeatre panel compatible with Xenex conventional panel.
- Repeat alarm information in second location.
- Maximum of only one, 8 zone repeat panel per system.
-
Gent XENS-SPARES Spares Pack For Xenex Panels
- Spare pack for Gent Xenex panels.
- Includes EOLs, battery link, screws and fuses.
-
Gent: Call Point Test Key – Pack of 10
Key Features
- Gent - Call Point Test Key - 14112-10 (Pack of 10)
- This is a replacement Test Key for Gent Manual Call Points.
-
GeoFire Weatherproof Door Holder
- Robust steel construction
- 1200N holding force
- Sealed against water ingress
-
Globex Standard Evacuation Chair
- Lightweight design at just 9.5Kg
- Folds flat for easy wall mounting
- Telescopic handle with automatic non-pinch clips
-
Globex Standard Plus Evacuation Chair
- Lightweight carry evacuation chair at just 11Kg
- Folds flat for easy wall mounting
- Includes carry facility for going upstairs
-
Globex Multi Evacuation Chair
- Versatile for both upstairs and downstairs transportation
- Fixed four-wheel operation for stability
- Includes carry facility for overcoming obstructions
-
Globex Spiral Evacuation Chair
- Suitable for spiral staircases
- Stainless steel construction
- Requires two operators for safe evacuation
-
Globex Stair Climber Evacuation Chair
- Telescopic handle for easy manoeuvrability
- Power controlled high resistance belts for secure movement
- Lockable rear wheels for stability
-
Evacuation Chair Standard Operator Training for 6-24 Delegates
- Certificated trainer and operator training course
- Packages suitable for 6, 12, 18 or 24 delegates
-
Gloria 7mm Pin & Indicator, Individual
- Pin and ok indicator for Gloria extinguishers.
- Sold individually.
- Available in green, blue, orange or yellow.
-
Graphite Intumescent Sleeve For Deedlock Double Magnet
- Pair of intumescent sleeves which fit around the armature bolts of Deedlock double maget.
- Provides protection for 60 or 30 minute fire doors.
-
Graphite Intumescent Sleeve For Deedlock Single Magnet
- Intumescent sleeve fits around the armature bolt of Deedlock single maget.
- Provides protection for 60 or 30 minute fire doors.
-
-
Ground 0 Photoluminescent Floor Identification Sign
- Ground 0Â floor sign.
- 100x300mm
- Photoluminescent rigid PCV material.
-
Grove IP20 LED Emergency Twinspot
- 720 lumen emergency output with 15 LEDs per head
- 50% lower power consumption than tungsten halogen
- Can be mounted in any orientation
-
GST DB-01D Common Conventional Detector Diode Base
- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
-
GU32 IP20 LED Emergency Twinspot
- 385 lumen output with 3.2W power consumption
- Carry handle for enhanced portability
- Health indicator feature for system monitoring
-
Haes 134 Access Control Keys, Sold In Pairs
- Access control keys for Haes control panel.
- Sold in pairs.
-
Haes 4 Way Sounder Circuit Extension Card
- Four monitored sounder circuits
- Compatible with existing sounder circuits
- Includes fault monitoring relay
-
Haes 8 Way Output Card For Conventional Panels
- 8 x switched -ve outputs
- 8 x volt free changeover relay outputs plus 8 x switch -ve outputs
- Common or zonal operation
-
-
Haes BRISOL-R Boxed Isolate Relay
- 8 amp double pole relay.
- Contacts rated at 250v ac.
- Isolate key switch.
- Isolated LED indicator.
- Option to use key switch to energise the relay.
-
Haes BRLDA Lockdown Alert Alarm Pulsing Relay
- Provides pulsing or continuous alert of the impending lockdown of a building.
- 8 amp double pole relay.
- Use with existing re control panel.
- Key switch activation.
- Alarm status LED indicator.
- ON & OFF pulsing times independantly programmable up to 15 seconds for truly customised ringing pattern.
- Suitable for surface or flush fitting.
-
-
Haes Excel-EN Network Card
- Network up to 8 control panels
- Add up to 8 repeater panels to the network
- Card also includes 6 programmable switch -ve outputs
-
Haes Fire Alarm Isolate Switch
- Complies with the recommendations of BS 5839 Pt 1 & BS EN60669
- Suitable for surface or recess fitting
- Low profile lid (15mm)
-
Haes Fire Alarm Panel 107 Spare Barrel Keys (Pair)
Spare 107 Key for Haes Fire Alarm Panel Keyswitch -
Haes LOCK801 Replacement Lock Assembly & Keys for Haes Control Panels
- Replacement lock assembly for Haes control panel.
- Included a pair of 801 keys.
-
Haes Replacement Keyswitch Assembly For Esento Evoque, Excel, Eclipse Esprint & Fusion
- Replacement / spare key and lock
- Ideal for Haes fire alarm panel doors
- Old part number: SWK107WIRED
-
Hanging Sign Metal Hooks 100mm (Per Pair)
100mm Metal hooks ideal for hanging suspending signs.
**For use with Rigid Plastic signs only -
Hanging Sign Metal Hooks 200mm (Per Pair)
200mm Metal hooks ideal for hanging suspending signs.
**For use with Rigid Plastic signs only -
Hark Stainless Steel Disabled Toilet Alarm System c/w Battery Back Up
Function meets aesthetics with the Hark Stainless Steel Disabled Toilet Alarm System, complete with pull cord, reset button and indicator.