R100 Addressable Sounder VAD
Description
This product is pending release and is expected to be available in 2026.
Summary
The Zeta R100-SBA is an exciting new addressable sounder beacon that combines powerful audio and visual alerting capabilities in a single, compact device. Operating on low power consumption while generating high volume and brightness output levels, the R100-SBA comfortably packs a punch with 100dB sounder output and selectable visual alarm device (VAD) settings to suit different installation requirements.
Softly styled and versatile, the R100-SBA comes supplied with an indoor mounting back box as standard and can be upgraded to a weatherproof solution using the outdoor back box (R100-SM/WP) which is available as an additional add-on. This flexibility makes it suitable for both Type B indoor and Type A outdoor applications, ensuring comprehensive coverage across various building environments.
For installation convenience, the R100-SBA is equipped with a 4-way pluggable terminal connector and earthing point, allowing quick and simple connection during the second fix phase. With 16 selectable alarm tones, 4 adjustable sounder volumes, and 8 VAD settings providing coverage up to W-3.5-6.1, this device offers exceptional configurability to meet specific site requirements while maintaining compliance with EN54 standards.
Features
- Combined addressable sounder and beacon in single unit
- 100dB +/- 3dB sounder output (anechoic)
- 16 selectable tone patterns for varied alarm scenarios
- 4 selectable sounder volumes: off, low, medium, high
- 8 selectable VAD settings (7 levels plus off)
- White beacon flash colour with 0.5Hz flash rate
- Maximum beacon flash coverage W-3.5-6.1
- Built-in short circuit isolator (SCI)
- 4-way pluggable connector block for easy installation
- Earthing point for loop connection
- Low quiescent current of 700μA (0.7mA)
- Red and grey housing colour
- Surface mount only installation
- Type A indoor and Type B outdoor capability
- IP21C rating for indoor use (standard)
- IP33C rating for outdoor use with R100-SM/WP back box
- Wide operating temperature range: -25°C to 70°C
- Housed in UL V0 flame retardant ABS
- Operates on 17-28V DC
- Compatible with Zeta Fyreye II protocol only
- Standard shallow back box with rear wiring entry included
- Optional outdoor back box with 2 x threaded 20mm cable entry points
- Compact dimensions suitable for various mounting locations
- Lightweight design at 320g
- Complies with EN54 Part 3 Type A and B (certification pending)
- Complies with EN54 Part 17 (certification pending)
- Complies with EN54 Part 23 strobe (certification pending)
FAQs
What is the difference between the R100-SA and R100-SBA?
The R100-SA is a sounder-only device, while the R100-SBA combines both sounder and beacon functionality in a single unit. The R100-SBA includes a white flash beacon with 8 selectable VAD settings providing coverage up to W-3.5-6.1, making it suitable for environments requiring both audible and visual alarm notification. Both models feature 100dB output, 16 selectable tones, and built-in short circuit isolators.
Can the R100-SBA be used outdoors?
Yes, the R100-SBA can be used outdoors when fitted with the optional R100-SM/WP outdoor back box assembly. With the standard indoor back box, the device has an IP21C rating suitable for Type A indoor use. When upgraded with the outdoor back box, it achieves IP33C rating and becomes suitable for Type B outdoor applications. The outdoor back box features 2 x threaded 20mm cable entry points for weatherproof connections.
How many VAD settings does the R100-SBA offer?
The R100-SBA offers 8 selectable VAD settings: 7 active levels (numbered 1-7) plus an off setting (0). Each setting provides different coverage areas and alarm current consumption. Setting 7 provides maximum coverage of W-3.5-6.1 with 36mA alarm current, while Setting 1 provides W-3.1-2.0 coverage with 11mA alarm current. This allows installers to optimize the device for specific room layouts and power budget requirements.
What alarm tones are available on the R100-SBA?
The R100-SBA features 16 selectable tone patterns that can be configured to suit different alarm scenarios and local requirements. The sounder output can also be adjusted across 4 volume settings: off, low, medium, and high, with a maximum output of 100dB +/- 3dB in anechoic conditions.
What protocol does the R100-SBA use?
The R100-SBA operates exclusively on the Zeta Fyreye II protocol. It is not compatible with other protocols, so it must be used with Zeta fire alarm control panels that support the Fyreye II addressable system.
What is the power consumption of the R100-SBA?
The R100-SBA has a low quiescent current of 700μA (0.7mA) when in standby mode. During alarm conditions, the current consumption varies from 5.5mA to 36mA depending on the VAD setting selected and whether the sounder is activated. The device operates on 17-28V DC supply voltage.
How is the R100-SBA installed?
The R100-SBA is surface-mounted only and comes with a shallow indoor back box as standard. It features a 4-way pluggable connector block and earthing point for loop connection, making installation straightforward during the second fix phase. The rear wiring entry on the standard back box allows cables to be routed behind the device. For outdoor installations, the R100-SM/WP back box provides threaded cable entries.
What are the dimensions and weight of the R100-SBA?
For indoor installation with the standard back box, the R100-SBA measures 100mm (H) x 100mm (W) x 106mm (D). When used with the outdoor R100-SM/WP back box, the dimensions increase to 120mm (H) x 120mm (W) x 124mm (D). The device weighs 320g, making it lightweight and easy to install.
Specifications
- Model Number: R100-SBA
- Part Number: 42-641
- Product Type: Addressable sounder beacon
- Housing Colour: Red & Grey
- Beacon Flash Colour: White
- Beacon Flash Rate: 0.5Hz
- Beacon Flash Coverage: W-3.5-6.1 (Max)
- Number Of Vad Settings: 7 (+ off)
- Sounder Output (anechoic): 100dB +/- 3dB
- Sounder Tones: 16
- Sounder Volumes: 4 – Off, Low, Medium, High
- Voltage: 17-28V DC
- Quiescent Current: 700μA (0.7mA)
- Alarm Current: 5.5mA-36mA
- Sounder Type: Type A (indoor), Type B (outdoor) with R100-SM/WP
- Ip Rating: IP21C (indoor), IP33C (outdoor) with R100-SM/WP
- Operating Temperature: -25°C to 70°C
- Max Humidity: 95% RH Non-Condensing
- Indoor Size (hxwxd In Mm): 100x100x106
- Outdoor Size (hxwxd In Mm): 120x120x124
- Weight: 320g
- Protocol: Zeta Fyreye II
- Connection Type: 4-way pluggable connector block with earthing point
- Mounting Type: Surface mount only
- Material: UL V0 Flame Retardant ABS
- Standard Back Box: Indoor shallow back box with rear wiring entry (included)
- Optional Back Box: R100-SM/WP outdoor back box with 2 x threaded 20mm cable entry
- Built-in Protection: Short circuit isolator (SCI)
- Vad Setting 7 Coverage: W-3.5-6.1 (36mA)
- Vad Setting 6 Coverage: W-3.2-5.7 (31mA)
- Vad Setting 5 Coverage: W-3.0-5.2 (26mA)
- Vad Setting 4 Coverage: W-2.6-4.6 (20mA)
- Vad Setting 3 Coverage: W-2.7-4.7 (21mA)
- Vad Setting 2 Coverage: W-4.2-2.7 (16mA)
- Vad Setting 1 Coverage: W-3.1-2.0 (11mA)
- Vad Setting 0 Coverage: OFF (5.5mA sounder only)
- Compliance En54 Part 3: Type A and B (Certification Pending)
- Compliance En54 Part 17: Certification Pending
- Compliance En54 Part 23: Strobe (Certification Pending)
- Manufacturer: Zeta Alarms Limited
Downloads
- Datasheet (Adobe PDF)