Fire Alarms
Showing 1081–1104 of 2000 results
-
Nittan Evolution Single Input/Output Module
- 4-20mA analogue input with current sink/source mode selection
- 5A relay output with normal and failsafe modes
- Built-in short circuit isolator with auto-reset protection
-
Nittan Evolution Triple Input/Output Module
- Triple input/output module with integral -ve line short circuit isolator for Evolution protocol
- Three supervised Class B inputs and three relay outputs (2x 1A @ 30Vdc, 1x 5A @ 240Vac)
- Failsafe mode option for AC relay and normally closed input configuration via DIP switches
-
Nittan Standard Deep Base
- Deep 23mm profile for enhanced wiring space
- Dual conventional and addressable termination configurations
- Wide 10-38Vdc operating voltage range
-
Nittan Standard Deep Diode Base
- Deep 23mm profile with Schottky diode protection
- Enhanced circuit isolation for conventional systems
- Remote indicator lamp support at 2mA
-
Salamander Wireless Fire Door System | Booster Unit (Signal Repeater)
- Extends radio range up to 8 times with multiple units
- 868MHz wireless with up to 100m coverage per unit
- LED indicators for power, transmit and fault status
-
Salamander Wireless Fire Door System | Controller Unit
- Manages up to 99 door closers/holders wirelessly
- 868MHz radio with up to 50m range, extendable with boosters
- Automatic 2-hour device status monitoring and fault detection
-
-
Identifire Pro Sounder
- 32 tone sounder with 9 EN54:3 approved tones including European and international patterns
- Multiple mounting options including flush, surface, pattress and IP67 weatherproof variants
- Low current consumption transducer-based technology with four selectable volume levels
-
Identifire Pro VID
- Ultra bright VID LED for enhanced visual notification
- Multiple mounting options including IP67 weatherproof base
- Five lens colour options for application-specific requirements
-
Identifire Pro Sounder VID
- 32 tones with 9 EN54-3 approved for comprehensive alarm signalling
- Ultra bright VID LED beacon with multiple lens colour options
- Four mounting options including IP67 weatherproof base
-
Identifire Pro Ceiling VAD
- EN54-23 approved low profile visual alarm device with bright indication
- Low current consumption of 35mA at 1Hz and 26mA at 0.5Hz
- Multiple mounting options including weatherproof IP67 rated base
-
Identifire Pro Wall VAD
- EN54-23 approved low profile visual alarm device with bright indication
- Low current consumption of 35mA at 1Hz and 26mA at 0.5Hz
- Multiple mounting options including weatherproof IP67 rated base
-
R100 Surface Mount Base & Weatherproof Assembly
- Weatherproof outdoor back box for R100 range
- IP33C rating upgrade from standard IP21C indoor box
- Two threaded 20mm cable entry points for secure connections
-
R100 Addressable Sounder VAD
- Combined sounder and beacon with 8 selectable VAD settings
- 100dB output with 16 selectable alarm tones
- Built-in short circuit isolator with indoor/outdoor options
-
EvacGo STS 205 BR2 Gerda Outer Enclosure
- BS8629:2019 compliant enclosure for evacuation alert control equipment in flats
- Secured by Design approved with Gerda One Key System for fire service access
- STS205 BR2 Level II tested security with 4 billion key combinations
-
R100 Addressable Sounder
- Addressable sounder with 100dB output and 16 selectable alarm tones
- Built-in short circuit isolator with low 700μA quiescent current
- Type A indoor and Type B outdoor capability with weatherproof backbox option
-
Talentum IR3 Flame Detector
- Triple IR sensor technology detects all flame types including invisible hydrogen fires
- Operates through contamination including oil, dust, water vapor and ice
- Class 1 EN54-10 certified with 25m detection range
-
Talentum IR3 Flame Detector (Ex d)
- Flameproof Ex d construction for hazardous area Zone 1 and 2 applications
- Triple IR sensor technology detects all flame types including invisible hydrogen fires
- Class 1 EN54-10 certified with 25m detection range through contamination
-
Talentum UV/IR2 Flame Detector
- Multi-spectrum UV and dual IR detection with 90° field of view
- 25m detection range for 0.1m² n-heptane fires (Class 1 EN54-10)
- Selectable relay or 4-20mA output with programmable sensitivity
-
Ziton ZP755WV-2R Weatherproof Sounder/VID in Red
- Addressable weatherproof sounder/beacon with 95 dBA output at 1m
- Up to 30 devices powered directly from loop wiring
- EN54-3 certified with selectable tones and volume control
-
Talentum IR2 Flame Detector (Ex d)
- Detects hydrocarbon and invisible hydrogen flames at 25m range
- Flameproof Ex d IIC T4 certification for Zone 1 and 2 hazardous areas
- Dual IR sensors with multi-spectrum detection (1.0-2.7 μm)
-
Advanced MXS-501-CP-S Spare 5100 Base Card w Small Chassis – No Loop Cards
- Spare MX-5100 basecard with small chassis for single loop fire alarm panels
- Pre-programmed replacement unit supplied without loop cards for field installation
- Includes 3A power supply unit integrated with chassis mounting plate
-
Securitime 12/24vdc Time Clock and Timer
- 7 independent programmable timers (one for each day of the week)
- Up to 20 switching events per program
- 2A rated double pole relay output with both momentary and latched operation modes
-
C-Tec XFP & Quantec USB Programming Lead
- USB to RS232 programming interface
- 1.8m cable length for flexible positioning
- Compatible with XFP fire panels and Quantec controllers