Fire Alarms
Showing 1801–1824 of 2000 results
-
Nittan Evolution Detector Mounting Base with SCI Shorting Link
- Includes a shorting link to allow loop continuity testing
- Allows for ease of installation cable testing
- Low profile
-
Nittan Evolution Detector Mounting Base With Short Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution DIN Rail Mounting Circuit Isolator
- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution EV-AV2 Addressable Sounder Beacon or Sounder Beacon Base
- Available as Standalone Sounder Beacon or Sounder Beacon Base
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer)
- 12 Tones DIP Switch Selected (3 Approved Tones)
-
Nittan Evolution EV-PSBCN Beacon Base (For Use With EV-PS)
- Beacon with Integral Base.
- Non Addressed – dedicated for use with EV-PS.
-
-
Nittan Evolution EV-SDR Addressable Sounder or Sounder Base
- Available as standalone sounder or sounder base
- 12 tones DIP switch selected (3 approved tones)
- Replaces EV-ABS sounder
-
Nittan Evolution High Output Beacon
- High output beacon
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution High Output Sounder
- High output sounder
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution High Output Sounder Beacon
- High output sounder beacon
- IP65 waterproof rating
- Integral short circuit isolator
-
Nittan Evolution Small Install Kits
- Nittan Evolution small installation kits.
- Choice of 2 kit, depending on system size.
-
Nittan UB-4 Standard Detector Base
- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Obscuration Test Filter for FFE Fireray Beam Detectors
- Replacment obsuration test filter for the Fireray range of beam detectors.
-
Old Style Fulleon/Menvier Manual Call Point Key (Pack of 10)
- Old Style Fulleon/Menvier Test Key.
- Sold in packs of 10.
-
Orbis Intrinsically Safe (IS) Galvanic Barrier
The Orbis (IS) Galvanic Barrier is installed in the safe area and ensures system integrity. -
Orbis Intrinsically Safe (IS) Multisensor Detector
- Reduces false alarms.
- Sensitive to fast burning, flaming fires.
- Improved sensitivity to black smoke.
- Compensation for slow changes in sensitivity.
- Algorithms for reliability of alarm.
-
Orbis Intrinsically Safe (IS) Optical Smoke Detector with Optional Flashing LED
- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- Wide angle optics respond well to a wide range of fires
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs
-
Orbis Intrinsically Safe (IS) TimeSaver Base
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state -
Orbis Marine TimeSaver Base
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. -
Apollo Orbis Conventional Multisensor Detector
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™
-
Apollo Orbis TimeSaver Continuity Switch Base
- Facilitates continuity testing for enhanced reliability
- Quick and efficient installation process
- Compatible with Orbis fire detection systems
-
Panasonic CR123 3V Lithium Battery
- Panasonic CR123A battery cell
- Used in many wireless fire alarm devices
-
PENN Peripheral Expanson Network Node For Advanced MxPro 5
- Lets you install peripherals in remote locations without an additional panel.
- Network in-built – either Standard or Fault Tolerant.
- Up to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configuration.