Fire Alarms
Showing 1849–1872 of 2001 results
-
Rutland ITS 11204 Concealed Cam Action Door Closer
- Concealed cam mechanism
- Variable power size EN 2-4
- Universal fitting
-
Rutlands TS.FIRETRAK.114 Electromagnetic Slide Arm Closer
- Variable power size EN 2-4
- CE marked
- Universal fitting
-
Sampling Chamber For VESDA-E VEP & VEU Aspiration Detectors
- Replacement sampling chamber for VESDA-E aspiration detectors.
- Compatible with the VEP and VEU ASDs.
-
Savex Slimline Document Holder
- A4 Document Size
- Powder Coated Finish
- Hooks for Key Storage
- Complete with Fire Safety Documents Label
-
Semi-Flushing Bezel For Advanced MxPro 5 Panels
- Semi flush fitting for all MxPro 5 panels.
- Picture frame effect for ease of installation 30mm flange for control panels, 20mm for repeaters.
-
Series 65 Conventional Duct Smoke Detector
- For use with Series 65 or Orbis detectors
- Operates in air speeds of 0.5m/s to 20m/s
- Transparent cover to view detector head LED
- Integral smoke test port
- Volt-free contacts
-
Sigma CP Sounder Controller Unit
- Two wire serial connection
- 230V AC or 24V DC powered versions
- All outputs monitored for open and short circuit faults
- Fully monitored by main control panel
- Up to 8 outputs with 1A available from each
- Boxed units in enclosure to match Sigma CP control panels
- Up to 7 sounder boards per system
- Zoned, 2-stage or common alarm
- Individual open and short circuit fault indicators
- Class change input facility
- Can be connected to serial bus with Ancillary boards and repeaters
- Power fault input for monitoring remote power supplies
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
-
SmartCell Call Point Breakable Tag, Pack of 50
- Pack of 50 breakable tags for SmartCell wireless call points
- Designed to work seamlessly with SmartCell wireless systems
- Compact physical dimensions of 8 x 51.5 x 0.5 mm (W x H x D) for easy installation and use
-
SmartCell Call Point Key, Pack of 10
- Pack of 10 call point keys for SmartCell wireless systems
- Designed to work seamlessly with SmartCell wireless call points
- Compact dimensions of 22 x 60 x 7 mm (W x H x D) for easy handling and storage
-
SmartConnect Mulit-Loop RS232 Printer Module
- Designed to EN54 requirements
- Use to interface to RS232 devices
- 5V aux output (ofr use with panel printer only)
- Extensive front unit indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop 6 Way Conventional Zone Monitor
- Designed to EN54 Part 2
- 6 x Conventional Zones
- Each zone is monitored for open & short circuit
- Extensive front unit status indications (see table below)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Each zone input can be configured as either Alarm or Technical Alarm
-
SmartConnect Multi-Loop Alarm Circuit Module
- Can be configured as an alarm output or a power output
- 2 x output circuit (500mA each)
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Power limited
-
SmartConnect Multi-Loop Card Module
- Designed to EN54 requirements
- Supports up to 250 addresses
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit status indications
- Time saving AUTO-LEARN facility
- 450mA max load (at 20 ohms loop resistance)
- Double address detection
-
SmartConnect Multi-Loop Gas Detection Module
- Each SCM-4-20 module has 2 available circuits
- Each circuit will allow a single connection of a 4-20mA device
- Extensive front unit status indications
- Compatible with any Smart Connect Multiloop Panel
- Quick Connect Din Rail Mount
-
SmartConnect Multi-Loop Multi-Input Module
- Designed to EN54 Part 2
- Each input is monitored for open & short circuits
- Extensive front unit status indications (See Datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
- Each input can be configured as either Alarm or Supervisory
-
SmartConnect Multi-Loop Multi-Relay Output Module
- Designed to EN54 Part 2
- 3 x Form C relay outputs
- Each relay can be programmed to activate on Alarm, Technical Alarm, or Fault.
- Extensive front unit indications (see datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop Repeater
- 4.3” colour touch screen display
- 8032 event log entries
- Up to 64 panel peer-to-peer network
- 13 status LED indicators
- 5 function button controls
- Fully functioning repeater provides the ability to program a networked Smart Multi-loop control panel from the front screen
- Accommodates wiring lengths up to 1000 metres from the control panel for added design and install flexibility
- Network can we wired in either a bus or a ring topology if a redundant path is required
- 8 password protected access accounts available (1 admin level, 7 user level)
- Uncluttered and intuitive interface allows alarms, tech alarms, and fault events to be easily viewed
- Low power consumption
- Small enclosure
-
SmartConnect Multi-Loop RS485 Network Module
- Designed to EN54 requirements
- Peer-to-peer networking
- Comprehensive cross network cause & effects
- Remote programming over the network
- The network can be configured with either a ring or bus topology
- Extensive front unit status indications (See datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)
-
SmartConnect Multi-Loop TCP/IP Module
- Designed to EN54 requirements
- TCP-IP output via RJ45
- Zeta Remote monitoring via a desktop PC or smartphone via the cloud
- Remote control via the cloud
- Responsive web interface
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit indications
- Quick and simple to install
-
Soft Pack Document Holder
- Incorporates eyelet hanging point for secure fixing.
- Roomy A4 capacity.
- Screen printed front panel for easy identification.
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.