Sounders, Flashers & Bells

• Very bright VID beacon.
• Ideal for many general signalling applications.
• Can be grid mounted for industrial applications.
• Five different lens colours available.

• Intrinsic safe certified beacon.
• Suitable for zones 0, 1 or 2.
• IP66 rated.

• Conventional sounder from KAC.
• Available with low profile or deep mounting base (IP65).
• 32 tones all approved to EN54-3.

• High output 230V AC siren
• Up to 127 dB
• Available with either 12V trigger
• IP rated for both indoor and outdoor use

• High output
• 16 selectable alarm tones
• Volume control
• Backwards compatible with Zeta Standard Protocol (link)

• High output of 105 or 110dB (depeding upon version)
• Conforms to EN54-23
• White or Red flash versions available
• Synchronised Flash

• Available as Standalone Sounder Beacon or Sounder Beacon Base
• Evolution FSK Protocol.
• EEPROM Addressed (Programmer)
• 12 Tones DIP Switch Selected (3 Approved Tones)

• Beacon with integral base
• Non addressed

• Available as standalone sounder or sounder base
• 12 tones DIP switch selected (3 approved tones)
• Replaces EV-ABS sounder

• High output beacon
• IP65 waterproof rating
• Integral short circuit isolator

• High output sounder
• IP65 waterproof rating
• Integral short circuit isolator

• High output sounder beacon
• IP65 waterproof rating
• Integral short circuit isolator

Rotary Fire Alarm Bell

With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.

• Suitable for internal and external use
• Sound output: 60dB at up to 35m
• Quick and simple to install

Sita Addressable Weatherproof Strobe (no sounder)

• Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
• LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
• Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
• Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
• Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
• Wide input voltage range leads to flexibility in system design.
• Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
• Soft start up means no current peak at start up, thus reducing circuit loading.
• New connection layout creates easier wiring and connection on installation.
• Locking Bases to prevent easy removal of device.

• Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
• LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
• Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
• Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
• Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
• Wide input voltage range leads to flexibility in system design.
• Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
• Soft start up means no current peak at start up, thus reducing circuit loading.
• New connection layout creates easier wiring and connection on installation.
• Locking Bases to prevent easy removal of device.

• Low current LED beacon.
• Simple ‘First Fix’ installation.
• Weatherproof to IP65 (deep base units).
• Choice of lens colours.
• Sounder and beacon can be controlled separately.
• Tone and volume can be preset or adjusted off-base - 20dB.
• Separate connections for sounder & beacon.

• Wide voltage range.
• Simple ‘First Fix’ installation.
• 32 tones.
• Tone and volume can be preset or adjusted off-base.
• Weatherproof to IP65 (deep base units).
• Synchronised alarm tones.
• Volume control - 20dB.

• For use with XP95 & Discovery systems
• Self-test fault monitoring
• IP65 rated
• Individual and group addressing
• Sycronisation of flashes
• Comes with Isolating Base as standard
• Loop-powered
• Red and clear lens options

• Ceiling mounted Visual Alarm Device
• Conforms to EN54-23
• White or Red flash versions available
• Available with optional Sounder
• Synchronised Flash

• EN54-23 VAD
• White or Red flash versions available
• Synchronised Flash

• EN54-23 VAD
• White or Red flash versions available
• Includes integral sounder