Fire Alarms
Showing 451–500 of 1726 results
-
Rutland TS.11204 Cam Action Door Closer | Slide Arm, EN 2-4, Fire Rated
- Universal fitting for pull-side, push-side or transom applications
- Certifire approved for FD30 to FD120 fire doors
- Slimline 39mm projection with power adjustable by spring (EN2-4)
-
Gent Vigilon S4-34415 | Mains Rated Single Channel Interface | Output Only Unit
- Loop powered single channel mains switching interface
- EN54-17 short circuit handling with individual addressing
- Complete with relay and enclosure for simplified installation
-
Advanced MXS-503-PCB Spare MX-5400 Basecard PCB only – No Loop Cards – Programmed
- 4-loop basecard PCB for MxPro 5400 panels
- Modular PCB-only replacement without PSU
- Pre-programmed and ready for installation
-
Nittan Conventional Diode Base
- Schottky diode technology for enhanced circuit protection
- Remote indicator lamp (RIL) support at 2mA
- EN54-5 and EN54-7 certified for fire detection applications
-
Nittan Evolution Mini Input Module
- Compact addressable input module with integral -ve line short circuit isolator
- Suitable for mounting within other equipment like aspirating detectors
- EN54-17 and EN54-18 approved with CPR and UKCA certification
-
Nittan Evolution Single Input/Output Module
- 4-20mA analogue input with current sink/source mode selection
- 5A relay output with normal and failsafe modes
- Built-in short circuit isolator with auto-reset protection
-
Nittan Evolution Triple Input/Output Module
- Triple input/output module with integral -ve line short circuit isolator for Evolution protocol
- Three supervised Class B inputs and three relay outputs (2x 1A @ 30Vdc, 1x 5A @ 240Vac)
- Failsafe mode option for AC relay and normally closed input configuration via DIP switches
-
Nittan Standard Deep Base
- Deep 23mm profile for enhanced wiring space
- Dual conventional and addressable termination configurations
- Wide 10-38Vdc operating voltage range
-
Nittan Standard Deep Diode Base
- Deep 23mm profile with Schottky diode protection
- Enhanced circuit isolation for conventional systems
- Remote indicator lamp support at 2mA
-
Salamander Wireless Fire Door System | Booster Unit (Signal Repeater)
- Extends radio range up to 8 times with multiple units
- 868MHz wireless with up to 100m coverage per unit
- LED indicators for power, transmit and fault status
-
Salamander Wireless Fire Door System | Controller Unit
- Manages up to 99 door closers/holders wirelessly
- 868MHz radio with up to 50m range, extendable with boosters
- Automatic 2-hour device status monitoring and fault detection
-
-
Evacuator Synergy+ Advanced Relay Interface
- Wireless relay interface with 2km mesh radio range
- 110dB siren with volt-free N/O and N/C contacts
- Up to 3 years battery life with totally wire-free operation
-
Identifire Pro Sounder
- 32 tone sounder with 9 EN54:3 approved tones including European and international patterns
- Multiple mounting options including flush, surface, pattress and IP67 weatherproof variants
- Low current consumption transducer-based technology with four selectable volume levels
-
Identifire Pro VID
- Ultra bright VID LED for enhanced visual notification
- Multiple mounting options including IP67 weatherproof base
- Five lens colour options for application-specific requirements
-
Identifire Pro Sounder VID
- 32 tones with 9 EN54-3 approved for comprehensive alarm signalling
- Ultra bright VID LED beacon with multiple lens colour options
- Four mounting options including IP67 weatherproof base
-
Identifire Pro Ceiling VAD
- EN54-23 approved low profile visual alarm device with bright indication
- Low current consumption of 35mA at 1Hz and 26mA at 0.5Hz
- Multiple mounting options including weatherproof IP67 rated base
-
Identifire Pro Wall VAD
- EN54-23 approved low profile visual alarm device with bright indication
- Low current consumption of 35mA at 1Hz and 26mA at 0.5Hz
- Multiple mounting options including weatherproof IP67 rated base
-
R100 Surface Mount Base & Weatherproof Assembly
- Weatherproof outdoor back box for R100 range
- IP33C rating upgrade from standard IP21C indoor box
- Two threaded 20mm cable entry points for secure connections
-
R100 Addressable Sounder VAD
- Combined sounder and beacon with 8 selectable VAD settings
- 100dB output with 16 selectable alarm tones
- Built-in short circuit isolator with indoor/outdoor options
-
AMX Graphical Fire Alarm Management
- Monitor multiple alarm networks with TCP/IP support
- Full device level graphics with automatic site map switching
- Compatible with Taktis EN & UL, Syncro AS & Elite RS panels
-
EvacGo STS 205 BR2 Gerda Outer Enclosure
- BS8629:2019 compliant enclosure for evacuation alert control equipment in flats
- Secured by Design approved with Gerda One Key System for fire service access
- STS205 BR2 Level II tested security with 4 billion key combinations
-
GEMINI Battery Powered Fire Alarm
- All-in-one unit with integral call point, battery and 105dB sounder
- Battery powered with 12 month life expectancy and fault monitoring
- Expandable system linking up to four units together for larger coverage
-
R100 Addressable Sounder
- Addressable sounder with 100dB output and 16 selectable alarm tones
- Built-in short circuit isolator with low 700μA quiescent current
- Type A indoor and Type B outdoor capability with weatherproof backbox option
-
Talentum IR3 Flame Detector
- Triple IR sensor technology detects all flame types including invisible hydrogen fires
- Operates through contamination including oil, dust, water vapor and ice
- Class 1 EN54-10 certified with 25m detection range
-
Talentum IR3 Flame Detector (Ex d)
- Flameproof Ex d construction for hazardous area Zone 1 and 2 applications
- Triple IR sensor technology detects all flame types including invisible hydrogen fires
- Class 1 EN54-10 certified with 25m detection range through contamination
-
Talentum UV/IR2 Flame Detector
- Multi-spectrum UV and dual IR detection with 90° field of view
- 25m detection range for 0.1m² n-heptane fires (Class 1 EN54-10)
- Selectable relay or 4-20mA output with programmable sensitivity
-
Ziton ZP755WV-2R Weatherproof Sounder/VID in Red
- Addressable weatherproof sounder/beacon with 95 dBA output at 1m
- Up to 30 devices powered directly from loop wiring
- EN54-3 certified with selectable tones and volume control
-
Talentum IR2 Flame Detector (Ex d)
- Detects hydrocarbon and invisible hydrogen flames at 25m range
- Flameproof Ex d IIC T4 certification for Zone 1 and 2 hazardous areas
- Dual IR sensors with multi-spectrum detection (1.0-2.7 μm)
-
Advanced MXS-501-CP-S Spare 5100 Base Card w Small Chassis – No Loop Cards
- Spare MX-5100 basecard with small chassis for single loop fire alarm panels
- Pre-programmed replacement unit supplied without loop cards for field installation
- Includes 3A power supply unit integrated with chassis mounting plate
-
Hyfire Static Wireless Sounder & Beacon Base
- EN54-25 and EN54-3 certified wireless sounder base with integrated LED visual indicator
- 32 selectable tones with 2 volume levels, 70-95dBA output
- 3 year battery life using dual standard CR123A lithium batteries
-
Securitime 12/24vdc Time Clock and Timer
- 7 independent programmable timers (one for each day of the week)
- Up to 20 switching events per program
- 2A rated double pole relay output with both momentary and latched operation modes
-
C-Tec XFP & Quantec USB Programming Lead
- USB to RS232 programming interface
- 1.8m cable length for flexible positioning
- Compatible with XFP fire panels and Quantec controllers
-
SZAOV 3A Single Zone Smoke Vent Control Panel
- 3 amp integral PSU
- Single detection zone
- Input from other detection systems, to activate
-
Advanced MxPro 5 – 1 Loop Panel
- Single loop driver card with 2 onboard sounder circuits
- 20 programmable zonal LEDs and 25 system LEDs
- Compatible with AdvancedLive for secure monitoring
-
Fike CIE-A-400 1 or 2 Loop Addressable Panel
- 1 loop panel expandable to 2 loops
- Supports up to 400 devices
- 32 supported zones
-
Morley-IAS Plus Compact 1-2 Loop Addressable Fire Panel
- Supplied with 1 loop, expandable to 2
- Honeywell's Advanced (AP) protocol
- 4,3'' touch-screen graphical colour display
-
Advanced MxPro 5 – 2 Loop Panel
- Expandable from 1 to 2 loops
- Advanced graphical LCD user interface
- Compatible with AdvancedLive for secure monitoring
-
SmartConnect Multi-Loop, 6 Module Addressable Panel
- Modular construction allows a panel to be specified using just the required modules
- Up to 4 loop card modules
- 4.3” colour touch screen display
- Capacity for up to 6 intelligent modules
- Full system redundancy
-
Ziton ZP2-A 1 Loop Panel in Small Cabinet
- High power loop with 800 mA per loop
- Ethernet port with TCP/IP for remote diagnostics
- Backwards compatible with existing devices
-
Ziton ZP2-A 1 Loop Panel in Large Cabinet
- High power loop with 800 mA per loop
- Ethernet port with TCP/IP for remote diagnostics
- Backwards compatible with existing devices
-
Kentec Syncro AS Addressable Panel
- Expandable 1-2 loop system with multi-protocol support (Apollo, Argus Vega, Hochiki)
- Network up to 64 panels with optional fault tolerant network card
- EN54-2 and EN54-4 certified with 3A power supply and removable chassis
-
SMS SenTRI1 1 Loop Addressable Fire Alarm Panel
- Single loop managing up to 127 addressable devices
- EN54 Parts 2 and 4 certified with LPCB approval
- Intuitive LCD interface with automated maintenance reminders
-
Morley MAx 1 Loop Addressable Panel
- Single loop panel.
- 7” touch screen display.
- 750mA loop capacity.
- Networkable up to 64 panels or 128 loops.
-
Simplicity Plus 1 or 2 Loop Addressable Panel
- 1 or 2 loop addressable panel
- Configured via the panel (no need for special tools or laptop)
-
Advanced MxPro 5 – 4 Loop Panel
- Expandable from 1 to 4 loops
- Advanced graphical LCD user interface
- Compatible with AdvancedLive for secure monitoring
-
Advanced MXS-503-CP | MxPro 5 Basecard with Large Chassis | MX-5400 Gen 2, No Loop Cards, Programmed
- MX-5400 basecard with large chassis configuration
- Pre-programmed and ready for installation
- Compatible with MxPro 5 Series control panels
-
Advanced MxPro 5 – 8 Loop Panel
- Expandable from 2 to 8 loops
- Advanced graphical LCD user interface
- Compatible with AdvancedLive for secure monitoring
-
SMS SenTRI Repeater Panel Flush Bezel
- Flush mounting bezel for SENTRI-RPT repeater panel
- Discrete wall integration with professional appearance
- Compatible with standard electrical back boxes
-
SMS SenTRI1 Flush Bezel
- Professional flush mounting solution for SENTRI1 panels
- Seamless wall integration with minimal visual impact
- Compatible exclusively with SMS SENTRI1 control panels