Fire Alarms
Showing 751–800 of 1578 results
-
Apollo XP95 VAD Base with Isolator
Key Features
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
-
Apollo XP95 Zone Monitor Unit with Isolator
- Fitted with a bi-directional short circuit isolator
- unaffected by loop short circuits
-
Arrow Series 600 Electro Magnetic Door Closer
- Hold open or swing free operation modes
- 120 minute fire rating certification
- CE approved power sizes 3-6
-
Askari Flange Sounder in Red or White
- Easily fitted within or on control cabinets.
- Easily fitted to most surfaces.
- Can be used in exposed locations.
-
Aspirating System Test Point Label, Roll of 100
- Roll of 100 stickers stating "Aspirating System Test Point".
-
VESDA-E VEP/VEU/VES Filter Cartridge
- Smart on-board filter with dust count tracking and remaining life monitoring
- Effective filtration and optical protection with clean air barriers
- Field replaceable design for minimal maintenance downtime
-
VESDA Filter Cartridge
- Easy swap replacement filter for minimal maintenance downtime
- Two stage filtration system with 99% particle removal efficiency
- Compatible with VLC, VLF, VLP and VLS VESDA detectors
-
Aspirator For VESDA VLF (LaserFOCUS) Aspirating Smoke Detector
- Replacement aspirator for the VESDA VLF (LaserFOCUS) ADS
-
Baffles For IAS Aspiration Detector
- Baffles for IAS aspiration detector.
- Version available to suit most point detectors.
-
Banshee Excel BS Conventional Base Sounder
- Slimmest profile in the industry
- Low current consumption
- Available in white or ivory to match to detectors
-
-
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
-
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
-
Base for Intrinsically Safe Flame Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Base for Intrinsically Safe Smoke Detector
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Basic Fire Safety Online Video Training (Single User License)
- Video based online training
- Institute of Fire Engineers approved
- Complies with fire safety law Regulatory Reform (Fire Safety) 2005
- Reduces training costs
- Multiple choice questions
- Automatic Certification
-
-
Infinity ID2 Manual Call Point
- Manual call point for the Infinity ID2 system
- Indoor or outdoor (IP67) version available
- Visible warning flag confirms activation
-
Fyreye MKII Addressable Detector Base
- Compatible with all MKII range of detectors
- 3 different types of base available
-
Zeta ZP4 Addressable Manual Call Point
- Indoor call point compatible with Zeta addressable panels
- Supplied with backbox for surface mount installations (optional flush mount bezel available)
- Very high visibility of the alarm condition
-
Fyreye MKII Sandwich Sounder & Flasher Base
- Sandwich design between base and detector
- 16 selectable international alarm tones
- Individual or group triggering capability
-
Xtratone MKII Addressable Sounder
- Indoor MKII addressable sounder compatible with Zeta control panels
- 102dB @ 1m sound output
- Available in Red or White
-
Xtratone MKII Addressable Sounder & Wall VAD
- Combined sounder and VAD in single unit
- 100dB sound output at 1 metre
- Hard or soft addressable capability
-
Raptor MKII Addressable Weatherproof Sounder
- IP65 weatherproof sounder
- 16 Tone patterns (site selectable)
- Available in red or white
-
Raptor MKII Addressable Weatherproof Sounder & Beacon
- IP65 weatherproof sounder/beacon
- Flashing rate 0.33Hz - 1.5Hz
- Available in red or white
-
C-Tec ActiV 96dB Conventional Base Sounder
- Third-party certified to EN54-3 (Sounders)
- Impressive 96dB(A) sound output @ 1m
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA
- Alarm Current at 18Vdc = 3.8mA
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
Fike Twinflex Sounder
- 2-wire zone powered operation
- IP65 weatherproof protection
- EN54-3 certified compliance
-
Fike Twinflex Wall Sounder & VAD
- 2-wire powered sounder and VAD combination
- IP65 rated weatherproof design
- DIP switch programmable operation
-
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec ActiV Surface Manual Call Point
- Smooth-action resettable element mimics the feel of breaking glass
- Supplied with a red back box, reset key and ‘Not in Use’ label
- Red LED ‘alarm ring’ illuminates call point face upon activation
- Photoluminescent operating window remains visible for up to 5 minutes
- Note an additional BF370SFP white flush mounting plate is required if you wish to flush mount the BF370S
-
C-Tec BF318 Remote LED Indicator
- Conventional remote LED from C-Tec.
- High intensity, wide-angle red LED.
- Include write-on label to add location information.
-
C-Tec BF366 24V 5A Isolatable Relay On A Plate
- Isolating keyswitch to temporarily disable outputs when testing fire alarm system.
- LED flashes and buzzer soudners when active.
- Fits onto a standard single gang back box.
-
C-Tec BF367 Auxiliary Device Isolator
- Isolate a 24V output for fire alarm panel.
- Prevent auxillary equipment such as autodiallers from activating.
- Label includes area to write on description.
-
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
-
CAST 4-8 Way Conventional Zone Convertor
- Seamless upgrade from conventional to addressable systems
- Supports up to 8 zones with extender PCB
- No additional wiring required for installation
-
-
CAST Detector Base
- The CA408 is third-party LPCB certified to the relevant parts of EN54 standards
- It offers a simple "click and twist" design for easy installation and can be ceiling-mounted in any orientation
- The base is also compatible with C-TEC's CAST protocol sounder VADs and can connect to a remote LED indicator
-
CAST Handheld Programmer
- Quick assignment of User IDs to CAST devices
- Output testing for sounders, VADs, and relays
- Battery-powered with auto shutdown feature
-
C-Tec CFP 8 Zone Conventional Repeater Panel
- Repeats functions of mater CFP panel (Standard Conventional or AlarmSense).
- Up to 8 repeaters per CFP master.
- Includes its own Mains power supply that requires its own standby battery supply.
-
C-Tec Hi-Output XP95 Wall Sounder
Key Features
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current./li>
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP21C (Type A) rated.
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
-
C-Tec NCP Double Gang Surface Interface Plate
- Adapts to most European fixing centers for flexible installation
- Available in multiple variants, including single gang shallow, single gang deep, double gang shallow, and double gang deep options
- Designed to match C-TEC's existing plastics and colors for a cohesive aesthetic, and can also be surface mounted directly to a wall
-
C-Tec NCP Single Gang Surface Interface Plate
- Adapts to most European fixing centers for flexible installation
- Available in multiple variants, including shallow and deep options, to suit different application needs
- Designed to match C-TEC's existing plastics and colors for a cohesive aesthetic
-
C-Tec NCP-27 Adaptable Conduit Box
- Product dimensions (mm): 101 x 38mm (3mm thick). Internal wiring depth: 33mm
- Construction & finish: White PVC. RAL9003 Blue White.
- Weight: 86g
- Notes: Supplied with 2 x K40 x 30mm fixing screws; Flammability rating: UL 94-5VA; Relevant standard: BSEN 60670-1
-
-
C-Tec Relay on a Plate 24v 5A (single gang)
- A general purpose, double-pole, polarised 24V 5A relay designed for use in 24V fire alarm systems.
- Incorporates a high intensity LED which illuminates red when the relay is active.
- Can be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets, rollershutter doors, etc.
- Can be mounted on 25mm flush or surface mount back boxes.
-
C-Tec SAF0724 CFP Accessory Pack
- Replacement accessory pack for the C-Tec CFP panels
- Suitable for CFP conventional and CFP AlarmSense panels
-
C-TEC Surface Mounting No Break Fire Call Point
- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
-
C-Tec XFP Addressable Fire Alarm Panel
- LPCB certified to EN54-2 & 4 for compliance assurance
- Multiple protocol compatibility options (Hochiki ESP or Apollo XP95/Discovery)
- Scalable loop configurations from 1-2 loops and 16-32 zones
-
C-Tec XFP Apollo/Hochiki Programming Tools
- Intuitive and easy-to-use software
- Includes USB memory stick and programming lead
- Free software updates available
-
CableSafe Fire Clips For Trunking (Pack of 100)
- Fire cable clip designed specifically to fix cable within trunking
- Quick and easy fixing with fold over fastening tabs
- Fits 2-core 1.5mm Fire Performance Cable
- Supplied in packs of 100