Fire Alarms
Showing 1151–1200 of 1578 results
-
Hochiki ESP Single Zone Monitor with SCI with DIN Option
- Loop Powered
- Single Loop Address
- Remote LED Output
- DIN Rail Version Available
-
Hochiki ESP Single Input Module
- Single Monitored Input
- Small Design
- Flying Leads for Easy Installation
- Approved by LPCB & VdS
-
Hochiki ESP Single Output Module
- Includes a Single Monitored Output
- Flying Leads for Easy Installation
- Approved by LPCB
-
Hochiki ESP Powered Output Module
- 24V Supply at Various Currents
- User Selectable Output
- Two Monitored Inputs
- Colour Coded Flying leads for easy installation
-
Apollo Intelligent Single or Twin Input/Output Unit with Isolator
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
-
Apollo Intelligent Mains Switching Input/Output Unit
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator*
- Address range 1 - 254
-
Hochiki ESP Device Address Programmer
- Recently been restyled to provide a more rugged yet light enclosure.
- Handheld programming tool for Hochiki ESP devices.
- Lightweight design.
- Battery operated with a capacity of 8,000 operations.
-
Hochiki ESP Sub Box Assembly
- Dobust Design
- Compatible with all CHQ Modules
- Used to Replace Damaged Components
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki Installation Kit for YBN-UA / YBO-UA(WHT) (YYA-A)
- For use with YBN-UA Recess Mounting Adaptor.
-
Hochiki Manual Call Point Key (Pack of 10)
- Comes in Pack of 10 Pcs
- Key for Hochiki Call Points
-
Hochiki Marine Conventional Photoelectric Smoke Detector
- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki Recess Base Adaptor (required YYA-A)
- Allows base and analogue sensor or conventional detector to be flush mounted.
- Supplied with fixing brackets.
- Colour-matched to existing ivory and white sensor/detector ranges.
- Sturdy construction, easy to install.
- Suitable for a maximum ceiling thickness of 30mm.
-
Hochiki Sav-Wire Manual Call Point
- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector
- Removable, High Performance chamber
- Wide voltage range (9.5 ~ 30 V dc)
- One master base
- Approved to MED by GL
- Approved by LPCB
-
Hochiki SMB Adaptor Plate
- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki Intrinsically Safe Conventional Smoke Detector
- Removable high performance chamber
- Automatic sensitivity window verification with drift compensation
- ATEX classification for intrinsic safety
-
Hochiki YBN-R/6M Marine Approved Standard Base
- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
HOCP Howler Call Point Site Alarm
Howler Call Point Site Alarm with Key Resettable Call Point Switch Option.
-
Honeywell FS20X Dual IR & UV Flame Detector
- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
- Wide operating temperature range
- Arc welding immunity
-
Honeywell Replacement Filter Element for LF-AD Filter
Enter a brief description of your product here. This description will be displayed on product list pages.
-
Talentum Flame Detector Test Torch
- Performs tests from up to 6 metres away
- Simulates flame spectrum using UV and IR bulbs
- Rechargeable via USB
-
Howler Call Post
The Howler Call post is a tough, powder-coated backboard that comes with statutory signage, mounting holes and fixings suitable for each type of Howler Alarm.
-
Howler SA01 Site Alert With Strobe
- Standalone site alarm
- LED visual strobe & 100dB @ 1m sounder
- Ability to link 20 units together with a 2 core cable
- Powered from 9V battery (included)
- IP55 rated
- Howler branded (the leading name in site alarm)
- 2 year warranty
-
Hush ActiV Grade C Stand-Alone Domestic Fire Alarm Kit
- Grade C fire detection
- Monitored for faults
- 72-hour standby battery
-
Hyfire Economy Single Loop 16 Zone Control Panel
- Economy Hyfire control panel.
- 16 zonal LEDs.
- Available with option keyswitch.
-
Toccare Mini Lite Half Loop Touch Screen Control Panel
- A totally touch screen panel with easy to use interface.
- The panel takes 2 x 12v 7amp batteries
- Compact & convinient enclosure.
- Supports up to 15 repeater panels.
- 4 on-board relays and 2 sounder circuits.
-
Hyfire HFW-W2W-01 Wireless Translator Module
- Hyhire wireless translator module.
- Gateway between Hyfire wireless devices & control panel.
- Loop powered.
- Compatible with up to 7 expander modules.
-
HyFire HFW-EM-01 Wireless Expander Module
- Wireless signal expander for Hyfire system.
- Compatible with dynamic, static and conventional translators.
- IP protection for mounting in challenging environments.
- Capability for 32 wireless field devices per expander.
-
Hyfire HFW-PA-05 Wireless Dual Optical Smoke Detector
- Advanced dual path optical chamber design.
- Internal algorithm processing optimises performance.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Hyfire HFW-TA-05 Wireless Heat Detector
- Hyfire wireless heat detector.
- Multiple sensitivity settings.
- Up to 10 year battery life.
- Utilises standard low cost lithium battery technology.
-
Hyfire Static Wireless Sounder Base
- Wireless operation with 150m range
- 32 sounder tones with dual volume levels
- 3 year battery life with standard lithium batteries
-
-
Hyfire HFW-SBCW-05 Base Sounder Cover Plate
- Blanking cap for Hyfire sounder or sounder/beacon bases.
- Compatible with HFW-BS-05 or HFW-BSB-05 bases.
-
Hyfire HFW-PB-01 Spare Primary Batteries, Pack of 10
- Primary battery cell for Hyfire Static devices.
- Sold in packs of 10.
-
Hyfire HFW-SB-01 Spare Secondary Batteries, Pack of 10
- Secondary battery cell for Hyfire Static devices.
- Sold in packs of 10.
-
ICAM IAS / ILS Coarse Filter Replacement Filter Element, Pack of 10
- Replacement coarse filter for ICAM IAS or ILA units.
- Sold in packs of 10.
- Available in Black or White.
-
ICAM IAS / ILS Fine Filter Replacement Element, Pack of 10
- Replacement fine filter for ICAM IAS or ILA units.
- Sold in packs of 10.
-
ICAM ILS Dual Channel Air-Sampling Smoke Detector
- Dual channel smoke detection
- Laser air-sampling smoke detection
- Up to 18 holes per channel (Class C)
-
Identifire 12 or 24V Single Gang Power Supply
- Works at 12 or 24 V dc selectable via link.
- Consistent Identifire design.
- Can be surface or flush mounted.
- Bright green LED power indicator.
- PCB cover to protect users from mains voltage.
-
Identifire 24 or 12V Auxiliary Relay
- Flush or surfaced mounted options Mains voltage switching capability.
- 4 x 20 mm knockouts for surface and glanded cable entry.
- Terminals to allow daisy chaining of multiple units.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltages.
- Bright LED indicating unit activation.
- Consistent look and feel to all other Identifire products.
-
IdentiFire Remote LED Indicator With Optional Buzzer
- Very bright, easily visible LED.
- Suitable for use on both conventional and addressable alarm systems.
- Available as flush or surface mounted option.
- Available with optional buzzer.
-
Identifire TriTone Conventional Sounder
- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
-
Identifire Wide Voltage Relay
- Wide Voltage range for multipurpose use.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltage.
- Terminals to allow daisy-chaining of multiple units.
- Flush or surface mounted options.
-
Infinity ID2 Remote LED Indicator, Ceiling Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop
-
Infinity ID2 Remote LED Indicator, Wall Mounted
- Indicates 1 device via 8 way dipswitch, or 10 devices via handheld MKII programmer
- Can be installed anywhere on loop